Chip-based optical tweezers levitate nanoparticles in a vacuum

Chip-based optical tweezers levitate nanoparticles in a vacuum
Schematic of optically levitating a nanoparticle with a metalens in a vacuum. The metalens focuses a laser beam to create chip-based optical tweezers. Credit: Kunhong Shen, Purdue University

Researchers have created tiny chip-based optical tweezers that can be used to optically levitate nanoparticles in a vacuum. Optical tweezers—which employ a tightly focused laser beam to hold living cells, nanoparticles and other objects—can be used for a variety of precision measurements and sensing applications. However, these optical traps are usually produced with bulky optical components.

"By using an ultrathin metalens, we reduced the diameter of the focusing from about 25 mm to about 0.4 mm," said research team leader Tongcang Li from Purdue University. "The chip-based design can be used to create an integrated and flexible optical system for studying near-surface forces by trapping an object less than 1 micrometer away from a surface. It might also be useful for trapping cold atoms in a to study quantum processes."

In Optica journal, researchers at Purdue University and Pennsylvania State University report the first realization of on-chip optical levitation in a vacuum with an ultrathin metalens. Accomplishing this feat in a vacuum helps improve the sensitivity of the system.

"Optically levitated particles can be used to create accelerometers and gyroscopes that could potentially be used in navigation," said Li. "Scientists are also using optically levitated particles to search for and and to study gravity at , which will deepen our understanding of nature."

Chip-based optical tweezers levitate nanoparticles in a vacuum
Researchers used a metalens to create chip-based optical tweezers that can optically levitate nanoparticles in a vacuum. The diameter of the metalens was about 50 times smaller than that of a conventional objective lens that they used before. An optical image of the metalens is shown. Credit: Tongcang Li, Purdue University

Toward a portable trap

This new research grows out of previous work in which the researchers used optical levitation in a vacuum to create the fastest human-made rotor and the most sensitive torque detector ever reported.

"As a next step, we wanted to make optical levitation technology more practical by minimizing the system enough to make it portable," said Li. "We began by reducing the size of the focusing lens by using a metalens, a type of flat lens that uses nanostructures to focus light."

In the new work, the researchers designed a metalens consisting of thousands of silicon nanopillars. The diameter of the metalens was about 50 times smaller than that of the conventional objective lens that they used before.

"Other research groups have recently demonstrated metalens-based optical trapping in liquids," said Kunhong Shen, the first author of this work. "Although performing optical trapping in a vacuum helps minimize noise from liquid or air, it is also much more difficult to do."

The researchers showed that a levitating nanoparticle could be transferred between two separate optical traps. Credit: Kunhong Shen, Purdue University

Levitating with a flat lens

To test their new optical design, the researchers guided an intense onto the metalens to generate trapping forces. They then sprayed a diluted nanoparticle solution into the trapping area. When a nanoparticle becomes trapped, it will appear as a bright spot that can be observed with a camera. Photon detectors measured the nanoparticle's movement in real time.

They showed that the metalens could levitate a nanoparticle in a vacuum at a pressure of 2×10-4 Torr—about 1/4,000,000 atmospheric pressure—without requiring any feedback stabilization. They were also able to transfer a levitating nanoparticle between two separate .

"Our metalens is a nanostructure layer with a thickness of merely 500 nm and a large numerical aperture of about 0.9. It offers similar performance as a conventional bulky lens," said research team leader Xingjie Ni from the Pennsylvania State University. "The metalens is fully vacuum-compatible. And more interestingly, we can flexibly design it to perform additional functions, for example, filtering out low-spatial-frequency components from the focusing light, which we have proven to be beneficial for optical levitation of ."

The researchers are now working to improve the tiny levitation devices by boosting the transmission and focusing efficiency of the metalens. They also want to make the diameter of the metalens even smaller to make optical levitation more practical for real-world applications.


Explore further

Holey metalens! New metalens focuses light with ultra-deep holes

More information: Kunhong Shen et al, On-chip optical levitation with a metalens in vacuum, Optica (2021). DOI: 10.1364/OPTICA.438410
Journal information: Optica

Citation: Chip-based optical tweezers levitate nanoparticles in a vacuum (2021, October 21) retrieved 5 December 2021 from https://phys.org/news/2021-10-chip-based-optical-tweezers-levitate-nanoparticles.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
69 shares

Feedback to editors