'Yolk-shell' design leads to world-record battery performance

Jan 09, 2013 by Mike Ross
The yolk-shell nanoparticles are made by coating sulfur with a nanoporous layer of hard titanium dioxide, and then using a solvent to dissolve away some of the sulfur while leaving the shell in place. Credit: Zhi Wei She, Stanford

(Phys.org)—SLAC and Stanford scientists have set a world record for energy storage, using a clever "yolk-shell" design to store five times more energy in the sulfur cathode of a rechargeable lithium-ion battery than is possible with today's commercial technology. The cathode also maintained a high level of performance after 1,000 charge/discharge cycles, paving the way for new generations of lighter, longer-lasting batteries for use in portable electronics and electric vehicles.

The research was led by Yi Cui, a Stanford associate professor of and a member of the Stanford Institute for Materials and Energy Sciences, a SLAC/Stanford joint institute. The team reported its results Jan. 8 in Nature Communications.

Lithium-ion batteries work by moving lithium ions back and forth between two electrodes, the cathode and anode. Charging the battery forces the ions and electrons into the anode, creating an electrical potential that can power a wide range of devices. Discharging the battery – using it to do work – moves the ions and electrons to the cathode.

Today's batteries typically retain about 80 percent of their initial capacity after 500 charge/discharge cycles.

Previous attempts to make sulfur cathodes using bare sulfur or simply coated particles could not prevent the dramatic reduction of energy-storage capacity as the lithium-sulfur intermediate compounds (polysulfides) created during charging broke free and dissolved away.

For some 20 years, researchers have known that sulfur could theoretically store more lithium ions, and thus much more energy, than today's . But two critical disadvantages prevented its commercial use: When lithium ions enter a sulfur cathode during discharging, they bond with to create an intermediate compound that's important for the cathode's performance; but this compound kept dissolving, limiting the cathode's capacity. At the same time, the influx of ions caused the cathode to expand by about 80 percent. When scientists applied protective coatings to keep the intermediate compound from dissolving, the cathode would expand and crack the coating, rendering it useless.

Cui's innovation is a cathode made of nanoparticles, each a tiny sulfur nugget surrounded by a hard shell of porous titanium-oxide, like an egg yolk in an eggshell. Between the yolk and shell, where the egg white would be, is an empty space into which the sulfur can expand. During discharging, lithium ions pass through the shell and bind to the sulfur, which expands to fill the void but not so much as to break the shell. The shell, meanwhile, protects the sulfur-lithium intermediate compound from electrolyte solvent that would dissolve it.

Each cathode particle is only 800 nanometers in diameter, about one-hundredth the diameter of a human hair.

"It basically worked the first time we tried it," Cui said. "The sulfur cathode stored up to five times more energy per sulfur weight than today's commercial materials.

"After 1,000 charge/discharge cycles, our yolk-shell sulfur cathode had retained about 70 percent of its energy-storage capacity. This is the highest performing sulfur cathode in the world, as far as we know," he said. "Even without optimizing the design, this cathode cycle life is already on par with commercial performance. This is a very important achievement for the future of rechargeable batteries."

Funding for the project came from the DOE Office of Basic Energy Sciences through SLAC's Laboratory Directed Research and Development Program, which directs a percentage of the lab's funding to high-risk, high-payoff research that, if successful, can lead to future program opportunities.

Over the past seven years, Cui's group has demonstrated a succession of increasingly capable anodes that use silicon rather than carbon because it can store up to 10 times more charge per weight. Their most recent anode also has a yolk-shell design that retains its energy-storage capacity over 1,000 charge/.

The group's next step is to combine the yolk-shell sulfur cathode with a yolk-shell silicon anode to see if together they produce a high-energy, long-lasting battery.

Explore further: Many tongues, one voice, one common ambition

More information: www.nature.com/ncomms/journal/… full/ncomms2327.html

Related Stories

New nanostructure for batteries keeps going and going

May 11, 2012

(Phys.org) -- For more than a decade, scientists have tried to improve lithium-based batteries by replacing the graphite in one terminal with silicon, which can store 10 times more charge. But after just a ...

Recommended for you

Many tongues, one voice, one common ambition

21 hours ago

There is much need to develop energy efficient solutions for residential buildings in Europe. The EU-funded project, MeeFS, due to be completed by the end of 2015, is developing an innovative multifunctional and energy efficient ...

Panasonic, Tesla to build big US battery plant

22 hours ago

(AP)—American electric car maker Tesla Motors Inc. is teaming up with Japanese electronics company Panasonic Corp. to build a battery manufacturing plant in the U.S. expected to create 6,500 jobs.

Simulation models optimize water power

23 hours ago

The Columbia River basin in the Pacific Northwest offers great potential for water power; hydroelectric power stations there generate over 20 000 megawatts already. Now a simulation model will help optimize the operation ...

Charging electric cars efficiently inductive

Jul 31, 2014

We already charge our toothbrushes and cellphones using contactless technology. Researchers have developed a particularly efficient and cost-effective method that means electric cars could soon follow suit.

User comments : 1

Adjust slider to filter visible comments by rank

Display comments: newest first

dschlink
not rated yet Jan 09, 2013
Some excellent work. The link to the paper on anode design is much appreciated.