Lithium-ion batteries will get more efficiency due to silicon, germanium, carbon nanowalls
Members of the D. V. Skobeltsyn Institute of Nuclear Physic and colleagues from the Faculty of Chemistry of the Lomonosov Moscow State University have developed a new silicon- and germanium-based material that could significantly increase specific characteristics of lithium-ion batteries. The research results have been published in the Journal of Materials Chemistry A.
Lithium-ion batteries are the most popular type of energy storage system for modern electronic devices. They are composed of two electrodes—the negative (anode) and positive (cathode) ones, which are placed into a hermetic enclosure. The space in between is filled with a porous separator, steeped in a lithium ion-conductive electrolyte solution. The separator prevents short circuits between the bipolar electrodes and provides electrolyte volume, necessary for ion transport. Electric current in an external circuit is generated when lithium ions extract from the anode material and move through the electrolyte with further insertion into cathode material. However, the specific capacity of a lithium-ion battery is largely defined by the number of lithium ions that can be accepted and transferred by active materials of the anode and cathode.
The scientists have developed and studied a new anode material that allows energy efficiency of Li-ion batteries to be significantly increased. The material is suitable for utilization in both bulk and thin film Li-ion batteries.
Physicist Victor Krivchenko, one of the authors, says, "Much attention is currently given to elaboration of silicon- and germanium-based anode materials. When interacting with lithium ions, these elements are capable of generating alloys whose specific capacity theoretically exceeds that of graphite, the traditional anode material used in modern lithium-ion batteries."
Among all known anode materials, silicon possesses the highest lithium gravimetric capacity, theoretically achieving up to 4200 mAh/g. This makes it the most promising material for batteries with improved energy density. Germanium is more expensive and has less gravimetric capacity than silicon. However, it's better at conducting current. Moreover, lithium ion diffusion inside germanium is several orders of magnitude faster than inside silicon. These peculiarities of germanium confer a substantial increase of battery power density without significant alteration of volume.
The main problem of the electrode materials is that their structure undergoes significant degradation in the cyclic process of charging and discharging, resulting in battery failure. The scientists propose to solve this problem with nanostructured materials and development of composite materials in which carbon nanostructures could be applied as stabilizing matrices. Transition from traditional two-dimensional to three-dimensional distribution of an active material on the electrode surface could be considered as an alternative solution.
Victor Krivchenko says, "The main novelty of the project is the idea to use a matrix formed by plasma-grown carbon structures with very complex surface architecture for implementation of silicon- and germanium-based anode materials with desired structural and functional properties. Such structures are composed of dense array of graphene-like nanowalls, vertically oriented to the surface of a metallic substrate."
The scientists have applied the magnetron sputtering technique, provided homogeneous coating of nanowall surfaces with 10 to 50 nm-thick silicon or germanium layers. At the same time, the final structure of the composite anode could be composed of one or alternating layers of active material. It was shown that the obtained three-dimensional architecture provides high specific capacity and increases stability of specific characteristics of silicon- and germanium-based anodes.
The scientist says, "The research results could technologically underpin further elaboration of promising electrode materials for next-generation energy storage systems. In the framework of the project, the scientists have achieved world-class results in the area of novel nanostructured material application, along with elaborating and studying their electrochemical and physicochemical properties. The studies have provided new experimental data relating to nanostructure behavior in electrochemical systems."