Smart chip tells you how healthy your battery is

November 25, 2015
The smart battery chip was invented by NTU Prof Rachid Yazami and is placed beside a Singapore 10 cent coin. Credit: NTU Singapore

Scientists from Nanyang Technological University (NTU Singapore) have developed a smart chip which can tell you how healthy is your battery and if it is safe for use.

If the battery in your smartphone or electric vehicle is faulty and is at risk of catching fire, this smart chip will warn you. Current warning systems only alert users when the battery is already overheating which may be too late for any remedial action.

Developed by Professor Rachid Yazami of the Energy Research Institute @ NTU (ERI@N), this smart chip is small enough to be embedded in almost all batteries, from the small batteries in mobile devices to the huge power packs found in and advanced aeroplanes.

A pioneer in , Prof Yazami won the 2014 Draper Prize for Engineering awarded by the Washington-based National Academy of Engineering for being one of the three founders of lithium-ion battery. The prestigious award recognised his discovery in the 1980s in making lithium-ion batteries safely rechargeable, paving the way for its universal use today.

"Although the risk of a battery failing and catching fire is very low, with the billions of lithium-ion batteries being produced yearly, even a one-in-a-million chance would mean over a thousand failures," explained Prof Yazami, who holds more than 50 patents and has authored more than 200 scientific papers, book chapters and reports on batteries.

"This poses a serious risk for electric vehicles and even in advanced aeroplanes as usually big battery packs have hundreds of cells or more bundled together to power the vehicle or aircraft. If there is a chemical fire caused by a single failed battery, it could cause fires in nearby batteries, leading to an explosion."

NTU Prof Rachid Yazami is holding his small smart chip which tells the exact state of charge of a battery. Credit: NTU Singapore

Patented technology

Embedded in the smart chip is a proprietary algorithm developed by Prof Yazami that is based on electrochemical thermodynamics measurements (ETM technology).

Current have a chip in them which only shows voltage and temperature readings. Today's battery chips are unable to detect symptoms of a malfunction and can also show only the estimated amount of charge the battery is holding.

In comparison, Prof Yazami's patented algorithm is able to analyse both the state of health and the state of charge through a 3-dimensional chart. On a monitor screen, it looks similar to a ski route down a mountain.

Drawing on the analogy of a fingerprint, he said: "The 'ski route' of a brand new battery looks different from those of a degraded or faulty battery - just like how two fingerprints will look quite different."

"In addition to knowing the degradation of batteries, our technology can also tell the exact state of charge of the battery, and thus optimise the charging so the battery can be maintained in its best condition while being charged faster," added Prof Yazami, the Director of Battery Programmes at ERI@N.

"My vision for the future is that every battery will have this chip, which will in turn reduce the risk of battery fires in electronic devices and electric vehicles while extending their life span."

Worldwide annual production of portable battery cells have been predicted to grow from 13 billion in 2014, to over 35 billion by 2025 according to a report by Avicenne Energy.

NTU Prof Rachid Yazami (left) is holding his smart battery chip with research fellow Sohaib El Outmani holding a prototype testing device. Credit: NTU Singapore

On track for commercialisation

The smart chip took Prof Yazami more than five years to develop and is now marketed by his start-up, KVI Pte Ltd. Working together with Prof Yazami on developing the smart chip platform at ERIAN is research scientist Mr Sohaib El Outmani.

KVI is now being incubated by NTU's commercialisation arm, NTUitive. KVI is developing this chip into a series of products, which include battery packs for recharging mobile devices, charge gauge for electric vehicles, and a smart chip for every battery.

The start-up company has an exclusive license on Prof Yazami's ETM technology which is based on his research done in NTU Singapore, California Institute of Technology (Caltech) and French National Centre for Scientific Research (CNRS).

His research incorporates two other unique factors: entropy, a measure of disorder or randomness of a system, and enthalpy, which is the sum of internal energy of a system.

It is expected that the technology will be made available for licensing by chipmakers and manufacturers before the end of 2016.

Explore further: Ultra-fast charging batteries that can be 70% recharged in just two minutes

Related Stories

New battery technologies take on lithium-ion

July 22, 2015

Lithium-ion batteries remain the technology-of-choice for today's crop of electric cars, but challengers are revving up to try to upset the current order. An article in Chemical & Engineering News (C&EN), the weekly newsmagazine ...

Simple mathematical formula models lithium-ion battery aging

October 30, 2015

Hybrid electric vehicles, cell phones, digital cameras, and the Mars Curiosity rover are just a few of the many devices that use rechargeable lithium-ion batteries. Now a team of Penn State researchers has a simple mathematical ...

Huawei shows super-fast battery charging at Japan event

November 16, 2015

Batteries that charge in minutes, the very concept is an attention-grabber. Huawei believes it has taken a real step forward and has videos to demonstrate its successful experiments with super-fast battery charging.

Recommended for you

Apple issues update after cyber weapon captured

August 26, 2016

Apple iPhone owners on Friday were urged to install a quickly released security update after a sophisticated attack on an Emirati dissident exposed vulnerabilities targeted by cyber arms dealers.

Sponge creates steam using ambient sunlight

August 22, 2016

How do you boil water? Eschewing the traditional kettle and flame, MIT engineers have invented a bubble-wrapped, sponge-like device that soaks up natural sunlight and heats water to boiling temperatures, generating steam ...

Auto, aerospace industries warm to 3D printing

August 25, 2016

New 3D printing technology unveiled this week sharply increases the size of objects that can be produced, offering new possibilities to remake manufacturing in the auto, aerospace and other major industries.

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.