Researchers establishe structure of a new superhard form of carbon

Jun 27, 2012 By Artem R. Oganov
SBU geosciences professor establishes structure of A new superhard form of carbon
A representation of the new M-Carbon structure.

(Phys.org) -- An international team led by Artem R. Oganov, PhD, a professor of theoretical crystallography in the Department of Geosciences at Stony Brook University, has established the structure of a new form of carbon. The results of their work, “Understanding the Nature of Superhard Graphite,” were published June 26 in Scientific Reports, a new journal of the Nature Publishing Group.

Dr. Oganov and his team used a novel computational method to demonstrate that the properties of what had previously been thought to be only a hypothetical structure of a superhard form of called “M-carbon” – constructed by Oganov in 2006 – matched perfectly the experimental data on “superhard graphite.”

“Most of the known forms of carbon have a colorful story of their discovery and a multitude of real or potential revolutionary applications,” said Oganov. “Think of diamond, a record-breaking material in more than one way. Think of graphene, destined to become the material of electronics of the future. Or of fullerenes, the discovery of which has started the field of nanoscience.”

This video is not supported by your browser at this time.

The story of yet another form of carbon started in 1963, when Aust and Drickamer compressed graphite at room temperature. High-temperature compression of graphite is known to produce diamond, but at room temperature an unknown form of carbon was produced. This new form, like diamond, was transparent and superhard - but its other properties were inconsistent with diamond or other known forms of carbon.

"The experiment itself is simple and striking: you compress black ultrasoft graphite, and then it suddenly turns into a colorless, transparent, superhard and mysterious new form of carbon – ‘superhard graphite,’” said Oganov. “The experiment was repeated several times since, and the result was the same, but no convincing structural model was produced, due to the low resolution of experimental data.”

Using his breakthrough crystal structure prediction methodology, Oganov in 2006 constructed a new low-energy superhard structure of “M-carbon.” That work resulted in a stream of scientific papers that within two years proposed different “alphabetic” structures, such as F-, O-, P-, R-, S-, T-, W-, X-, Y-, Z-carbons. “The irony was that most of these also had properties compatible with experimental observations on ‘superhard graphite.’ To discriminate between these models, higher-resolution experimental data and additional theoretical insight are required,” he said.

According to Oganov, the reason why diamond is not formed on cold compression of graphite is that the reconstruction needed to transform graphite into diamond is too large and is associated with too great an energy barrier, which can be overcome only at high temperatures, when atoms can jump far. At low temperatures, graphite chooses instead a transformation associated with the lowest activation barrier.

One could establish the structure of ‘superhard graphite’ by finding which structure has the lowest barrier of formation from graphite. To do that, Oganov, his postdoctoral associate Salah Eddine Boulfelfel, and their German colleague, Professor Stefano Leoni, of Dresden University of Technology, used a powerful simulation approach, recently adapted to solid materials, known as transition path sampling. These simulations required some of the world's most powerful supercomputers, and finally proved that "superhard " is indeed identical to M-carbon, earlier predicted by Oganov.

“These calculations are technically extremely challenging, and it took us many months to perform and analyze them. Searching for the truth, you have to be prepared for any outcome, and we were ready to accept if another of the many proposed structures won the contest. But we got lucky, and our own proposal – M-carbon – won,” said Oganov.

Another result of this study is a set of detailed mechanisms of formation of several potential carbon allotropes. These could be used to engineer ways of their synthesis for potential technological applications.

“We don't know yet which applications M-carbon will find, but most forms of carbon did manage to find revolutionary applications, and this amazing material might do so as well,” said Oganov.

Explore further: Understanding the source of extra-large capacities in promising Li-ion battery electrodes

More information: Paper on Arxiv: arxiv.org/pdf/1204.4750v1.pdf

Related Stories

Researchers predict material 'denser than diamond'

Jun 08, 2011

(PhysOrg.com) -- Stony Brook University graduate student Qiang Zhu, together with Professor of Geosciences and Physics, Artem R. Oganov, postdoc Andriy O. Lyakhov and their colleagues from the University de ...

Superhard carbon material could crack diamond

Dec 07, 2011

(PhysOrg.com) -- By applying extreme pressure to compress and flatten carbon nanotubes, scientists have discovered that they can create a new carbon polymer that simulations show is hard enough to crack diamond. ...

How diamonds emerge from graphite

Sep 21, 2011

Scientists have used a new method to precisely simulate the phase transition from graphite to diamond for the first time. Instead of happening concerted, all at once, the conversion evidently takes place in ...

New carbon allotrope could have a variety of applications

Apr 22, 2011

(PhysOrg.com) -- Carbon comes in many different forms, and now scientists have predicted another new form, or allotrope, of carbon. The new form of carbon, which they call T-carbon, has very intriguing physical ...

Recommended for you

Graphene surfaces on photonic racetracks

11 hours ago

In an article published in Optics Express, scientists from The University of Manchester describe how graphene can be wrapped around a silicon wire, or waveguide, and modify the transmission of light through it.

Simulating the invisible

11 hours ago

Panagiotis Grammatikopoulos in the OIST Nanoparticles by Design Unit simulates the interactions of particles that are too small to see, and too complicated to visualize. In order to study the particles' behavior, he uses ...

Building 'invisible' materials with light

12 hours ago

A new method of building materials using light, developed by researchers at the University of Cambridge, could one day enable technologies that are often considered the realm of science fiction, such as invisibility ...

User comments : 4

Adjust slider to filter visible comments by rank

Display comments: newest first

Feldagast
5 / 5 (4) Jun 27, 2012
Transperant Aluminum here we come.
StarGazer2011
1 / 5 (3) Jun 27, 2012
what wrong with them; dont they know carbon is pollution? carbon is BAD! how come they arent getting sick?
tarheelchief
3 / 5 (2) Jun 28, 2012
Would it be possible to line drilling tubes on oil platforms with this ultrahard carbon?
Could you use these inside nuclear reactor tubes?
Would it be possible to create cylinder sleeves for diesels?
Could you shape this into turbine blades or coat the turbine blades with this product using powder coating techniques?
axemaster
5 / 5 (2) Jul 01, 2012
So I'm a bit confused - does this material remain stable after being decompressed?