2-D materials may enable electric vehicles to get 500 miles on a single charge

January 10, 2019 by Sharon Parmet, University of Illinois at Chicago
2D catalysts power an electric vehicle. Credit: Amin Salehi-Khojin

Lithium-air batteries are poised to become the next revolutionary replacement for currently used lithium-ion batteries that power electric vehicles, cell phones and computers.

Lithium-air batteries, which currently are still in the experimental stages of development, can store 10 times more energy than , and they are much lighter. That said, lithium-air batteries could be even more efficient and provide more charge with the incorporation of advanced catalysts made from . Catalysts help increase the rate of chemical reactions inside batteries, and depending on the type of material from which the catalyst is made, they can help significantly boost the ability of the battery to hold and provide energy.

"We are going to need very high-energy density batteries to power new advanced technologies that are incorporated into phones, laptops and especially electric vehicles," said Amin Salehi-Khojin, associate professor of mechanical and industrial engineering in UIC's College of Engineering. Salehi-Khojin and his colleagues synthesized several 2-D materials that can serve as catalysts. A number of their 2-D materials, when incorporated into experimental lithium-air batteries as the catalyst, enabled the battery to hold up to 10 times more energy than lithium-air batteries containing traditional catalysts. Their findings are published in the journal Advanced Materials.

"Currently, average about 100 miles per charge, but with the incorporation of 2-D catalysts into lithium-air batteries, we could provide closer to 400 to 500 miles per charge, which would be a real game-changer," said Salehi-Khojin, who is also the corresponding author of the paper. "This would be a huge breakthrough in energy storage."

Salehi-Khojin and his colleagues synthesized 15 different types of 2-D transition metal dichalcogenides or TMDCs. TMDCs are unique compounds because they have high electronic conductivity and fast electron transfer that can be used to participate in reactions with other materials, such as the reactions that take place inside batteries during charging and discharging.

The investigators experimentally studied the performance of 15 TMDCs as catalysts in an electrochemical system mimicking a lithium-air battery.

"In their 2-D form, these TMDCs have much better and greater reactive surface area to participate in electrochemical reactions within a battery while their structure remains stable," explained Leily Majidi, a graduate student in the UIC College of Engineering and first author of the paper.

"Reaction rates are much higher with these materials compared to conventional catalysts used such as gold or platinum," Majidi said.

One of the reasons the 2-D TDMCs performed so well is because they help speed both charging and discharging reactions occurring in .

"This would be what is known as bi-functionality of the catalyst," Salehi-Khojin said.

The 2-D materials also synergize with the electrolyte—the material through which ions move during charge and discharge.

"The 2-D TDMCs and the ionic liquid electrolyte that we used acts as a co- system that helps the electrons transfer faster, leading to faster charges and more efficient storage and discharge of energy."

"These new represent a new avenue that can take batteries to the next level, we just need to develop ways to produce and tune them more efficiently and in larger scales," Salehi-Khojin said.

Explore further: New design produces true lithium-air battery

More information: Leily Majidi et al, New Class of Electrocatalysts Based on 2D Transition Metal Dichalcogenides in Ionic Liquid, Advanced Materials (2018). DOI: 10.1002/adma.201804453

Related Stories

New design produces true lithium-air battery

March 21, 2018

Researchers at the University of Illinois at Chicago and at Argonne National Laboratory have designed a new lithium-air battery that works in a natural-air environment and still functioned after a record-breaking 750 charge/discharge ...

A novel approach of improving battery performance

September 18, 2018

New technological developments by UNIST researchers promise to significantly boost the performance of lithium metal batteries in promising research for the next-generation of rechargeable batteries. The study also validates ...

3D-printed lithium-ion batteries

October 17, 2018

Electric vehicles and most electronic devices, such as cell phones and laptop computers, are powered by lithium-ion batteries. Until now, manufacturers have had to design their devices around the size and shape of commercially ...

Nanotubes may give the world better batteries

October 25, 2018

Rice University scientists are counting on films of carbon nanotubes to make high-powered, fast-charging lithium metal batteries a logical replacement for common lithium-ion batteries.

Recommended for you

3-D culturing hepatocytes on a liver-on-a-chip device

January 17, 2019

Liver-on-a-chip cell culture devices are attractive biomimetic models in drug discovery, toxicology and tissue engineering research. To maintain specific liver cell functions on a chip in the lab, adequate cell types and ...

This computer program makes pharma patents airtight

January 17, 2019

Routes to making life-saving medications and other pharmaceutical compounds are among the most carefully protected trade secrets in global industry. Building on recent work programming computers to identify synthetic pathways ...

Cultivating 4-D tissues—the self-curving cornea

January 17, 2019

Scientists at Newcastle University have developed a biological system which lets cells form a desired shape by moulding their surrounding material—in the first instance creating a self-curving cornea.

2 comments

Adjust slider to filter visible comments by rank

Display comments: newest first

Parsec
5 / 5 (6) Jan 10, 2019
Another thing worth mentioning is that TMD's are dirt cheap, particularly compared with gold, platinum or other precious metals. The most expensive one incorporates Tellurium, which currently sells for about 20 bucks a pound.

Considering we are talking about minute qualities of these materials, the primary cost of the battery is the Lithium.
Natriarchy
not rated yet Jan 12, 2019
We need these new battery techs on the market ASAP

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.