How do you prolong the useful life of lubricants?

August 22, 2018 by Andrew Myers, Stanford University
Whether in your car or a wind turbine, foam breaks down the lubricant needed for engines to work efficiently. Credit: Pixabay/phtorxp

Wind turbines towering hundreds of feet over many landscapes herald a future of endless, clean energy.

But in a crucial sense, turbines remain rooted in the past: Much like with your car, their engines require lubrication to run smoothly. The question for many is, how do you prolong the useful life of the lubricants?

In a new study published in the journal Proceedings of the National Academy of Sciences, Vineeth Chandran Suja, a Stanford graduate student in chemical engineering, explores one of the core problems: foaming oil.

The problem, he says, is that whether it's in your car or a wind turbine, each time metal gears grind against other metals, oil gets sloshed around and mixed with air. This often results in the formation of with varying lifespans. If the bubbles don't immediately burst, they soon collect into a , which is one of the primary mechanisms of engine decline.

The foam is harmful in a variety of ways. It degrades the lubricant and allows gears to grind. Oxygen trapped in oil foams causes the metal parts to oxidize, that is, to rust. And the foam acts like a thermal insulator, trapping harmful heat in the system. Hence, lubricant manufacturers are actively looking for ways to mitigate lubricant foaming.

To better understand the conditions that give rise to foams, the researchers, led by Gerald Fuller, professor of chemical engineering, adapted a set of techniques originally developed to study the liquid layer that lubricates the exterior of the human eye. These novel techniques enabled them to study the colorful patterns on the surface of individual oil bubbles – a key advance from previous research, which focused on foams in the aggregate.

When Fuller and Suja zoomed in on the iridescent surface of their tiny oil bubbles, they discovered that the color patterns revealed the thickness of the bubble wall. Brighter, more vibrant colors indicated thicker walls that led to more persistent bubbles and, hence, foamier, less-effective oils, says Suja, who was first author on the paper. Darker colors indicated thin-walled bubbles that would quickly pop, so the oils that would last longer and provide better lubrication.

The researchers employed their new color-coding technique to determine why some motor oils tend to get foamy. Their ultimate goal was to figure out how to make longer lasting oils. In the process they made a surprising discovery about how evaporation factors into and foaming.

As they zoomed in, they observed that evaporation at the top of each bubble caused its surface tension to change, drawing extra oil toward the top. This additional oil made the bubble wall thicker and stronger, and prevented it from bursting. They captured video of the bubbles pulsating as tears of oil pooled at the top, then rolled down the exterior wall of the bubble only to get wicked up to the top again by evaporation. As the cycle continued, these persistent, thick-walled bubbles tended to become undesirable foams. "Learning that this whole process is driven by evaporation was a bit of an unexpected result," Fuller says.

The researchers showed that this effect is most pronounced in blended, multi-grade oils, but virtually absent in homogenous, single-grade oils. "It turns out, if you want to reduce foaming, you want to use high-purity, single-grade oils," Fuller says.

Suja and Fuller are now pursuing two strategies to find ways to reduce or eliminate foaming. The first is to formalize their understanding of bubble formation, evaporation and foaming with mathematical models that will allow them to simulate how pure or blended oils are likely to perform in real life. This would speed the research and discovery process for new oils. The second is to look for antifoaming additives or other ways to counteract those pulsing teardrops.

This is a fundamental study that elucidates a big problem that plagues lubrication, Fuller says. "It also points us in some interesting new directions."

Explore further: Foam could offer greener option for petroleum drillers

More information: V. Chandran Suja et al. Evaporation-induced foam stabilization in lubricating oils, Proceedings of the National Academy of Sciences (2018). DOI: 10.1073/pnas.1805645115

Related Stories

Foam could offer greener option for petroleum drillers

August 9, 2018

Hydraulic fracturing, or fracking, provides critical energy for society, but also uses large amounts of fresh water while producing corresponding amounts of wastewater. Water-based foams, which use about 90 percent less water ...

Low pressure reduces bubble trouble

March 29, 2018

Spray coating and inkjet-based electronics manufacture are among the industrial applications in which liquid droplets are applied to a surface. But minuscule air bubbles that get trapped beneath the droplet as it lands can ...

Engineers stop soap bubbles from swirling

September 13, 2016

The spinning rainbow surface of a soap bubble is more than mesmerizing – it's a lesson in fluid mechanics. Better understanding of these hypnotic flows could bring improvements in many areas, from longer lasting beer foam ...

Hot nanoparticles produce giant and explosive bubbles

July 12, 2018

When gold nano particles in water are illuminated by a laser, they get very hot: well above the boiling point of water. The formation of vapour bubbles caused by this, is well-known. New experiments, however, using a very ...

Raman spectral band oscillations in large graphene bubbles

May 10, 2018

A team of researchers at the Center for Multidimensional Carbon Materials, within the Institute for Basic Science (IBS) have measured and controlled the temperature of individual graphene bubbles with a single laser beam ...

Recommended for you

First microarrayed 3-D neuronal culture platform developed

November 14, 2018

Neuronal development is often regulated by the graded distribution of guidance molecules, which can either attract or repel the neuronal migration or neurite projection when presented in a format of concentration gradients, ...

2 comments

Adjust slider to filter visible comments by rank

Display comments: newest first

tblakely1357
1 / 5 (3) Aug 22, 2018
"Wind turbines towering hundreds of feet over many landscapes herald a future of endless, clean energy."

I thought this was a science article not a fantasy story.
jpdemers
not rated yet Sep 02, 2018
Saturating the air above the oil with the oil molecules ought to do the trick, if evaporation is the issue. That means sealing, not ventilating, the casing, and adding cooling fins or radiators if necessary.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.