Capturing CO2 using heat pumps

May 24, 2018 by Christina Benjaminsen, SINTEF
By using a new concept for CO2 capture employing renewable heat recovery technology, the energy requirement for CO2 capture from cement plants is reduced by three quarter,s as shown by calculations completed by SINTEF Industry in Norway and Politecnico di Milano, Italy. The system can be installed in all industrial installations that emit exhaust gases containing CO2. Credit: Thinkstock

Capturing the greenhouse gas CO2 from industrial processes such as cement manufacture is a demanding and therefore expensive exercise. However, by introducing a renewable powered heat pump in the capture system, the energy required to capture CO2 is reduced by three quarters.

This should be good news for the climate, since cement manufacture is responsible for six per cent of the world's CO2 emissions. This is more than the combined output of all the aircraft in the world. Among other things, this has prompted Norway's Socialist Left Party to launch the idea of creating a market for cement manufactured with zero emissions.

The new cleaning that is being launched may however be used in all which emit CO2 in exhaust gases, such as cement manufacture, metallurgy, waste incineration and coal-fired power stations.

Combining different technologies

The calculations and method originate at SINTEF Industry and Politecnico di Milano, which has succeeded in reducing during CO2 capture and cleaning (scrubbing) using so-called SARC technology. SARC stands for "Swing Adsorption Reactor Cluster". This is a CO2 capture process which combines the use of a heat pump and a to reduce energy consumption when removing CO2 from exhaust gas.

In practice this means that the heat generated in the chemical reaction that takes place during the capture of CO2 is recovered. It is then re-used in the more energy-demanding process in which the CO2 is released from the chemical (the adsorbent) which removed the CO2 in the first step.

Credit: Doghouse/Knut Gangåssæter

This takes place by means of heat pump technology. In addition the desorption is subjected to moderate pressure decrease, which enables the heat pump to function more effectively, and thereby improving its energy efficiency. (See illustration)

As a result, a large amount of heat is transferred between the two reactors in the process, and the energy cost is reduced considerably.

Suitable for retrofitting in existing installations

Testing is still in progress to determine which adsorbent captures CO2 most effectively. Among other things, effective tests have been achieved using polyethylenimine (PEI) and alkali metal-based adsorbents, both in powder form.

Both the and the vacuum pump used in the SARC process are powered by electricity. This makes it easy to retrofit a scrubbing installation to existing exhaust sources if necessary, in contrast with many other technologies which require complex integration or additional steam generation.

SINTEF is now working on estimating the cost of integrating SARC technology in three specific industries: Cement manufacture, energy generation from waste and coal-fired power generation. The aim is to demonstrate the concept in a new project financed by the CLIMIT programme.

CLIMIT is the Norwegian national programme for research, development and demonstration of technology for the capture, management and disposal of CO2 in connection with gas-based generation from fossil fuels.

Explore further: Next-gen solvents capture carbon with half the energy

Related Stories

Next-gen solvents capture carbon with half the energy

June 20, 2017

U.S. energy production could increase with the help of an improved carbon capture technology that use about half the energy of today's standard technologies. Emissions captured at fossil fuel power plants could in turn be ...

Our cities are hidden power stations

January 3, 2018

Waste heat and locally-produced renewable energy can be generated by compact, "urban power plants" that are efficient enough to supply heat to entire housing estates.

Recommended for you

In colliding galaxies, a pipsqueak shines bright

February 20, 2019

In the nearby Whirlpool galaxy and its companion galaxy, M51b, two supermassive black holes heat up and devour surrounding material. These two monsters should be the most luminous X-ray sources in sight, but a new study using ...

When does one of the central ideas in economics work?

February 20, 2019

The concept of equilibrium is one of the most central ideas in economics. It is one of the core assumptions in the vast majority of economic models, including models used by policymakers on issues ranging from monetary policy ...

Research reveals why the zebra got its stripes

February 20, 2019

Why do zebras have stripes? A study published in PLOS ONE today takes us another step closer to answering this puzzling question and to understanding how stripes actually work.

Correlated nucleons may solve 35-year-old mystery

February 20, 2019

A careful re-analysis of data taken at the Department of Energy's Thomas Jefferson National Accelerator Facility has revealed a possible link between correlated protons and neutrons in the nucleus and a 35-year-old mystery. ...


Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.