Research gets closer to producing revolutionary battery to power renewable energy industry

March 14, 2018, University of Kansas
An advanced hydrogen-bromine flow battery could make renewables like wind and solar more profitable and widespread. Credit: Trung Van Nguyen

Any resident of the Great Plains can attest to the massive scale of wind farms that increasingly dot the countryside. In the Midwest and elsewhere, wind energy accounts for an ever-bigger slice of U.S. energy production: In the past decade, $143 billion was invested into new wind projects, according to the American Wind Energy Association.

However, the boom in faces a hurdle—how to effectively and cheaply store energy generated by turbines when the is blowing, but energy requirements are low.

"We get a lot of wind at night, more than at daytime, but demand for electricity is lower at night, so, they're dumping it or they lock up turbines—we're wasting electricity," said Trung Van Nguyen, professor of petroleum & chemical engineering at the University of Kansas. "If we could store this excess at night and sell or deliver it during daytime at peak demand, this would allow wind farm owners to make more money and leverage their investment. At the same time, you deploy more wind energy and reduce demand for fossil fuels."

Since 2010, Nguyen has headed research to develop an advanced hydrogen-bromine flow , an advanced industrial-scale battery design—it would be roughly the size of a semi-truck—that engineers have strived to develop since the 1960s. It could work just as well to store electricity from solar farms, to be discharged overnight when there's no sun.

Funded first by the National Science Foundation and later by the Advanced Research Projects Agency-Energy, Nguyen has worked with researchers from the University of California at Santa Barbara, Vanderbilt University, the University of Texas at Arlington and Case Western Reserve University. Along the way, Nguyen has overseen breakthrough work on key components of hydrogen-bromine battery design.

For one, there's the Nguyen developed at KU. A battery's electrode is where the electrical current enters or leaves the battery when it's discharged. To be maximally efficient, an electrode needs a lot of surface area. Nguyen's team has developed a higher-surface-area carbon electrode by growing carbon nanotubes directly on the carbon fibers of a porous electrode.

"Before our work, people used paper-carbon electrodes and had to stack electrodes together to generate high-power output," he said. "The electrodes had to be a lot thicker and more expensive because you had to use multiples layers—they were bulkier and more resistive. We came up with a simple but novel idea to grow tiny carbon nanotubes directly on top of carbon fibers inside of electrodes—like tiny hairs—and we boosted the surface area by 50-70 times. We solved the high-surface requirement for hydrogen-bromine battery electrodes."

A key issue remaining before a hydrogen-bromide battery can be marketed successfully is the development of an effective catalyst to accelerate the reactions on the hydrogen side of the battery and provide higher output while surviving the extreme corrosiveness in the system. Now, with funding from an NSF sub-award through a private company called Proton OnSite, Nguyen is verging on solving this last barrier.

"I think we're on the verge of a real breakthrough," he said. "We need a durable catalyst, something that has the same activity as the best catalyst out there, but that can survive this environment. Our previous material didn't have sufficient surface area to give enough power output. But I've been able to continue to work on this rhodium sulfide catalyst. I think we've figured out a way to increase . We now have a better way, and we may publish that in three to six months—we have some minor issues to resolve, but I think we'll have a suitable material for the hydrogen reaction in this system."

The new results to develop an industrial scale advanced hydrogen-bromine flow battery will be presented at the meeting of the Electrochemical Society in Seattle this May.

Indeed, Nguyen—who has founded several startup companies over his research career—noted the new hydrogen-bromine battery soon could be commercialized, and easily could be scaled to MW (power) MWh (energy) scales, coming in modular container form, about 1MWh in a full-size container. But he cautioned it could only be used in remote, industrial sites—places like wind and solar farms, where the huge batteries likely would be buried underground.

"This energy storage system, because of its corrosiveness, isn't suitable for residential or commercial systems," he said. "Bromine is like chlorine gas. Dig a hole, line it with cement or plastic, drop this battery down and cover it up—it should be in an enclosed or sealed system to prevent leakage or emission of bromine gas. This will be suitable only for large-scale remote energy storage like and wind farms."

The KU researcher said the rise of renewable energy would depend on technology breakthroughs that make the economics attractive to energy producers and investors, and he hoped his new battery design could play a part.

"The way we use fossil fuel for is very inefficient, wasteful and generates greenhouse gasses," Nguyen said. "For fossil fuels, you make the initial investment, and also you pay for operation every day—pay for coal or for natural gas for rest of the life of the power plant. Once you make the initial investment in renewable, the electricity you make is free."

Explore further: All power to the proton: Researchers make battery breakthrough

Related Stories

Liquid fuel for future computers

March 15, 2017

Researchers at ETH Zurich and IBM Research Zurich have built a tiny redox flow battery. This means that future computer chip stacks—in which individual chips are stacked like pancakes to save space and energy—could be ...

Recommended for you

1 in 3 Michigan workers tested opened fake 'phishing' email

March 16, 2018

Michigan auditors who conducted a fake "phishing" attack on 5,000 randomly selected state employees said Friday that nearly one-third opened the email, a quarter clicked on the link and almost one-fifth entered their user ...

Origami-inspired self-locking foldable robotic arm

March 15, 2018

A research team of Seoul National University led by Professor Kyu-Jin Cho has developed an origami-inspired robotic arm that is foldable, self-assembling and also highly-rigid. (The researchers include Suk-Jun Kim, Dae-Young ...

Tokyo Tech's six-legged robots get closer to nature

March 12, 2018

A study led by researchers at Tokyo Institute of Technology (Tokyo Tech) has uncovered new ways of driving multi-legged robots by means of a two-level controller. The proposed controller uses a network of so-called non-linear ...

1 comment

Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Mar 14, 2018
It's so cool that we're in the middle of an energy storage revolution.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.