Shoe-string theory: Science shows why shoelaces come untied

April 11, 2017, University of California - Berkeley
Credit: University of California - Berkeley

A new study by mechanical engineers at UC Berkeley finally shows why your shoelaces may keep coming untied. It's a question that everyone asks, often after stopping to retie their shoes, yet one that nobody had investigated until now. The answer, the study suggests, is that a double whammy of stomping and whipping forces acts like an invisible hand, loosening the knot and then tugging on the free ends of your laces until the whole thing unravels.

The study is more than an example of science answering a seemingly obvious question. A better understanding of knot mechanics is needed for sharper insight into how knotted structures fail under a variety of forces. Using a slow-motion camera and a series of experiments, the study shows that shoelace knot failure happens in a matter of seconds, triggered by a complex interaction of forces.

"When you talk about knotted structures, if you can start to understand the shoelace, then you can apply it to other things, like DNA or microstructures, that fail under dynamic forces," said Christopher Daily-Diamond, study co-author and a graduate student at Berkeley. "This is the first step toward understanding why certain knots are better than others, which no one has really done."

A slow-motion video of a shoelace coming untied. Credit: UC Berkeley

The study will be published April 12 in the journal Proceedings of the Royal Society A.

There are two ways to tie the common shoelace bow tie knot, and one is stronger than the other, but no one knows why. The strong version of the knot is based on a square knot: two lace crossings of opposite handedness on top of each other. The weak version is based on a false knot; the two lace crossings have the same handedness, causing the knot to twist instead of lying flat when tightened. The current study shows that both versions fail in the same way, and lays the groundwork for future investigation into why the two similar structures have different structural integrities.

Credit: University of California - Berkeley
"We are trying to understand knots from a mechanics perspective, such as why you can take two strands and connect them in a certain way that can be very strong, but another way of connecting them is very weak," said Oliver O'Reilly, a Berkeley professor of mechanical engineering, whose lab conducted the research. "We were able to show that the weak knot will always fail and the strong knot will fail at a certain time scale, but we still do not understand why there's a fundamental mechanical difference between those two knots."

The goal of the new study was to develop a baseline understanding of the mechanics of how a shoelace bow tie knot comes untied under dynamic forces. Previous studies have described how knotted structures fail under sustained loads, but little research has shown how knotted structures fail under the dynamic pressures of changing forces and loads.

The first step was to record the process of a shoelace knot untying in slow motion. Study co-author and graduate student Christine Gregg, a runner, laced up a pair of running shoes and ran on a treadmill while her colleagues filmed her shoes.

Credit: University of California - Berkeley

The researchers found that a shoelace knot unties like this: When running, your foot strikes the ground at seven times the force of gravity. The knot stretches and then relaxes in response to that force. As the knot loosens, the swinging leg applies an inertial force on the free ends of the laces, which rapidly leads to a failure of the knot in as few as two strides after inertia acts on the laces.

"To untie my knots, I pull on the free end of a bow tie and it comes undone. The shoelace knot comes untied due to the same sort of motion," said Gregg, a Berkeley Chancellor's Fellow. "The forces that cause this are not from a person pulling on the free end, but from the inertial forces of the leg swinging back and forth while the knot is loosened from the shoe repeatedly striking the ground."

In addition to the dynamic interaction of forces on the knot, the footage also revealed a large magnitude of acceleration at the base of the knot. To dig deeper, the researchers then used an impacting pendulum to swing a shoelace knot and test knot mechanics using a variety of different laces.

Credit: University of California - Berkeley
"Some laces might be better than others for tying knots, but the fundamental mechanics causing them to fail is the same, we believe," Gregg said.

The researchers also tested their theory that increasing inertial forces on the free ends would trigger runaway failure of the knot. They added weights to the free ends of the laces on a swinging knot and saw that knots failed at higher rates as the inertial forces on the free ends increased.

"You really need both the impulsive at the base of the knot and you need the pulling forces of the free ends and the loops," Daily-Diamond said. "You can't seem to get knot failure without both."

Credit: University of California - Berkeley

Of course, when a person goes walking or running, their shoelaces don't always come untied. Tightly tied laces can require more cycles of impact and leg swinging to cause knot failure than one might experience in a day's worth of walking or running. More research is needed to tease apart all the variables involved in the process. But the study does offers an answer to the annoying question of why your laces seem fine one minute and then come untied the next.

"The interesting thing about this mechanism is that your laces can be fine for a really long time, and it's not until you get one little bit of motion to cause loosening that starts this avalanche effect leading to failure," Gregg said.

Credit: University of California - Berkeley

Explore further: New study shows that proteins are 'virtually' knotted

More information: The Roles of Impact and Inertia in the Failure of a Shoelace Knot, Proceedings of the Royal Society A (2017). rspa.royalsocietypublishing.or … .1098/rspa.2016.0770

Related Stories

What's a knot—and what's not—in genomic mapping

April 11, 2017

While DNA sequencing provides precise, nucleotide-by-nucleotide genomic information, genome mapping provides a bigger-picture perspective of sequenced DNA that can provide valuable structural information. Like mapping roads ...

New model predicts the force required to tie simple knots

September 8, 2015

Got rope? Then try this experiment: Cross both ends, left over right, then bring the left end under and out, as if tying a pair of shoelaces. If you repeat this sequence, you get what's called a "granny" knot. If, instead, ...

Recommended for you

Researchers make shape shifting cell breakthrough

December 11, 2018

A new computational model developed by researchers from The City College of New York and Yale gives a clearer picture of the structure and mechanics of soft, shape-changing cells that could provide a better understanding ...

Novel laser technology for microchip-size chemical sensors

December 11, 2018

Most lasers emit photons of exactly the same wavelength, producing a single color. However, there are also lasers that consist of many frequencies, with equal intervals in between, as in the teeth of a comb; thus, they are ...

3 comments

Adjust slider to filter visible comments by rank

Display comments: newest first

Milou
5 / 5 (1) Apr 12, 2017
Why not tuck the ends so they do not move or swing after tying the shoe lace?
gculpex
Apr 14, 2017
This comment has been removed by a moderator.
Len44
not rated yet Apr 17, 2017
Some years ago I investigated the knot that a hay baler makes in twine. I tried this with my shoes with a small change so they can be untied. One time I stepped on the end of a long lace and nearly untied one shoe. Other than that I have never had one come untied. Since I tried this knot I saw the same knot in a new pair of shoes. The laces were tied and stuffed into the shoe. It is a very simple knot. It is the same as you accidentally get in a piece of string or a electrical cord or a garden hose. One loop and the end stuck through. To use it on a shoe you take both laces together, form a loop close to the shoe, grab the middle of the tails and push a loop through the first loop and tighten the first loop.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.