Stability challenge in perovskite solar cell technology

December 23, 2016
Dr. Yan Jiang holding a freshly made MAPbI3 perovskite solar cell can be seen on the left. MAPbI3 perovskite solar cells degrade, which is marked by a drastic change in color, as seen on the right, held by Dr. Shenghao Wang. Credit: Okinawa Institute of Science and Technology

While solar cell technology is currently being used by many industrial and government entities, it remains prohibitively expensive to many individuals who would like to utilize it.. There is a need for cheaper, more efficient solar cells than the traditional silicon solar cells so that more people may have access to this technology. One of the current popular topics in photovoltaic technology research centers around the use of organic-inorganic halide perovskites as solar cells because of the high power conversion efficiency and the low-cost fabrication.

Perovskites are a type of crystalline material that can be formed using a wide variety of different chemical combinations. Of the many different perovskites formulations that can be used in , the methylammonium lead iodide perovskite (MAPbI3) has been the most widely studied. Solar cells made of this material have been able to reach efficiencies exceeding 20% and are cheaper to manufacture than silicon. However, their short lifespans have prevented them from becoming a viable alternative. In order to help create better solar cells in the future, members of the Energy Materials and Surface Sciences Unit at the Okinawa Institute of Science and Technology Graduate University (OIST) have been investigating the cause of rapid degradation of these (PSCs).

Dr. Shenghao Wang, first author of the publication in Nature Energy, suggests that the degradation of MAPbI3 perovskites may not be a fixable issue. His research reveals that iodide-based perovskites will universally produce a gaseous form of iodine, I2, during operation, which in turn causes further degradation of perovskite. While many researchers have pointed to other sources, such as moisture, atmospheric oxygen and heat as the cause of MAPbI3 degradation, the fact that these solar cells continue to degrade even in the absence of these factors led Wang to believe that a property intrinsic to these PSCs was causing the breakdown of material.

The schematic drawing showing that various factors (e.g., moisture, oxygen, light illumination, applied electric field, etc.) during the operation of MAPbI3 perovskite solar cells can generate iodine, which leads to degradation of solar cells. Credit: Okinawa Institute of Science and Technology

"We found that these PSCs are self-exposed to I2 vapor at the onset of degradation, which led to accelerated decomposition of the MAPbI3 perovskite material into PbI2." Wang explained, "Because of the relatively high vapor pressure of I2, it can quickly permeate the rest of the perovskite material causing damage of the whole PSC.

This research does not rule out the probability of using perovskites in solar cells, however. Professor Yabing Qi, leader of the Energy Materials and Surface Sciences Unit and corresponding author of this work, expounds "our experimental results strongly suggest that it is necessary to develop new materials with a reduced concentration of iodine or a reinforced structure that can suppress iodine-induced degradation, in addition to desirable photovoltaic properties".

These researchers at OIST are continuing to investigate different types of perovskite materials in order to find more efficient, cost-effective, and long lifespan perovskite material suitable for use. Their ultimate goal is to make solar cells that are affordable, efficient and stable so that they will be more accessible to the general population. Hopefully, better, cheaper solar cells will entice more people to utilize this technology.

Explore further: New way to make low-cost solar cell technology

More information: Accelerated degradation of methylammonium lead iodide perovskites induced by exposure to iodine vapour. Nature Energy. DOI: 10.1038/nenergy.2016.195

Related Stories

New way to make low-cost solar cell technology

November 14, 2016

Researchers at ANU have found a new way to fabricate high efficiency semi-transparent perovskite solar cells in a breakthrough that could lead to more efficient and cheaper solar electricity.

New advances in solar cell technology

October 5, 2016

With the high environmental cost of conventional energy sources and the finite supply of fossil fuels, the importance of renewable energy sources has become much more apparent in recent years. However, efficiently harnessing ...

Toward 'greener,' inexpensive solar cells

September 28, 2016

Solar panels are proliferating across the globe to help reduce the world's dependency on fossil fuels. But conventional panels are not without environmental costs, too. Now scientists are reporting in the Journal of the American ...

Recommended for you

Volvo to supply Uber with self-driving cars (Update)

November 20, 2017

Swedish carmaker Volvo Cars said Monday it has signed an agreement to supply "tens of thousands" of self-driving cars to Uber, as the ride-sharing company battles a number of different controversies.

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.