Super-slick material makes steel better, stronger, cleaner

October 20, 2015
Super-slick material makes steel better, stronger, cleaner

Steel is ubiquitous in our daily lives. We cook in stainless steel skillets, ride steel subway cars over steel rails to our offices in steel-framed building. Steel screws hold together broken bones, steel braces straighten crooked teeth, steel scalpels remove tumors. Most of the goods we consume are delivered by ships and trucks mostly built of steel.

While various grades of steel have been developed over the past 50 years, steel surfaces have remained largely unchanged—and unimproved. The steel of today is as prone as ever to the corrosive effects of water and salt and abrasive such as sand. Steel surgical tools can still carry microorganisms that cause deadly infections.

Now, researchers at the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) have demonstrated a way to make steel stronger, safer and more durable. Their new surface coating, made from rough nanoporous , is the most durable anti-fouling and anti-corrosive material to date, capable of repelling any kind of liquid even after sustaining intense structural abuse.

The new material joins the portfolio of other non-stick, anti-fouling materials developed in the lab of Joanna Aizenberg, the Amy Smith Berylson Professor of Materials Science and core faculty member of the Wyss Institute for Biologically Inspired Engineering at Harvard University. Aizenberg's team developed Slippery Liquid-Infused Porous Surfaces in 2011 and since then has demonstrated a broad range of applications for the super-slick coating, known as SLIPS. The new SLIPS-enhanced steel is described in Nature Communications.

"Our slippery steel is orders of magnitude more durable than any anti-fouling material that has been developed before," said Aizenberg. "So far, these two concepts - mechanical durability and anti-fouling - were at odds with each other. We need surfaces to be textured and porous to impart fouling resistance but rough nanostructured coatings are intrinsically weaker than their bulk analogs. This research shows that careful surface engineering allows the design of a material capable of performing multiple, even conflicting, functions, without performance degradation."

The material could have far-ranging applications and avenues for commercialization, including non-fouling medical tools and devices, such as implants and scalpels, nozzles for 3D printing and, potentially, larger-scale applications for buildings and marine vessels.

The video will load shortly
Surface coating scratched with stainless tweezers, screw driver and diamond pen. The coating, made from rough nanoporous tungsten oxide, is capable of repelling any kind of liquid even after sustaining intense structural abuse. Credit: Aizenberg Lab/Harvard SEAS

The biggest challenge in the development of this surface was to figure out how to structure steel to ensure its anti-fouling capability without mechanical degradation. The team solved this by using an electrochemical technique to grow an ultrathin film of hundreds of thousands of small and rough tungsten-oxide islands directly onto a steel surface.

"If one part of an island is destroyed, the damage doesn't propagate to other parts of the surface because of the lack of interconnectivity between neighboring islands," said Alexander B. Tesler, former postdoctoral fellow at SEAS, current research fellow at Weizmann Institute of Science in Israel and the paper's first author. "This island-like morphology combined with the inherent durability and roughness of the tungsten oxide allows the surface to keep its repellent properties in highly abrasive applications, which was impossible until now."

Electrochemical deposition is already a widely used technique in steel manufacturing, said Aizenberg.

"I don't want to create another line that would cost millions and millions of dollars and that no one would adopt," Aizenberg said. The goal, she said, is to be scalable, but not disruptive to current industry practices.

The team tested the material by scratching it with stainless steel tweezers, screwdrivers, diamond-tipped scribers, and pummeling it with hundreds of thousands of hard, heavy beads. Then, the team tested its anti-wetting properties with a wide variety of liquids, including water, oil, highly corrosive media, biological fluids containing bacteria and blood. Not only did the material repel all the liquid and show anti-biofouling behavior but the tungsten oxide actually made the steel stronger than steel without the coating.

The video will load shortly
Medical steel devices are one of the material's most promising applications because the material successfully repels bacteria and blood. Credit: Aizenberg Lab/Harvard SEAS

Medical devices are one of the material's most promising applications, said Philseok Kim, co-author of the paper and co-founder and vice president of technology at SEAS spin-off SLIPS Technologies Inc. "Because we show that this material successfully repels bacteria and blood, small medical implants, tools and surgical instruments like scalpels and needles that require both significant mechanical strength and anti-fouling property are high value-added products we are exploring for application and commercialization," said Kim.

Another avenue for application is functional 3D printing and microarray devices, especially in printing highly viscous and sticky biological and polymeric materials where friction and contamination are major obstacles.

U.S. Navy spends tens of millions of dollars each year dealing with the ramifications of biofouling on hulls. Organisms such as barnacles and algae create drag and increased energy expenditure, not to mention the costs of cleaning and reapplying current anti-fouling paints, most of which are harmful to the environment. If scaled-up, this material could provide a cleaner, more cost-efficient alternative.

"This research is an example of hard core, classic material science," said Aizenberg. "We took a material that changed the world and asked, how can we make it better?"

Explore further: New startup will develop non-stick surfaces for broad range of industrial applications

Related Stories

Antibacterial stainless steel created

July 19, 2011

Materials scientists at the University of Birmingham have devised a way of making stainless steel surfaces resistant to bacteria in a project funded by the Engineering and Physical Sciences Research Council which culminated ...

New process allows for stronger, lighter, flexible steel

February 5, 2015

( —A trio of researchers with South Korea's Graduate Institute of Ferrous Technology has found a way to create a new low-density steel that is stronger, lighter and more flexible than the conventional steel that ...

Recommended for you

A composite thread that varies in rigidity

October 27, 2016

EPFL scientists have developed a new type of composite thread that varies in stiffness depending on its temperature. Applications range from multifunctional robots to knitted casts, and even tunable medical devices.


Adjust slider to filter visible comments by rank

Display comments: newest first

5 / 5 (3) Oct 20, 2015
Wow! This will increase the lifespan of ocean ships by decades!
5 / 5 (2) Oct 20, 2015
Sounds like the next anti-stick fry pan material. I wonder how much it costs.
5 / 5 (2) Oct 20, 2015
Sounds like a great finish for knives and other tools too.
not rated yet Oct 21, 2015
Test it with live steam/HNO3 at 1100lb/in^2 and over 900 deg F. and see if still holds up. Maybe then can be used in boilers.
4 / 5 (1) Oct 21, 2015
Wow, good for everything and the kitchen sink, which should be the first thing they make.
5 / 5 (1) Oct 25, 2015
I wonder if this coating can be applied to aircraft aluminum. Non-icing wings would be very nice.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.