Plasmonic Promises: First Observation of Plasmarons in Graphene

Plasmonic Promises: First Observation of Plasmarons in Graphene
A theoretical model of plasmaron interactions in graphene, sheets of carbon one atom thick.

( -- The energy bands of complex particles known as plasmarons have been seen for the first time by scientists working with graphene at the Advanced Light Source. Their discovery may hasten the day when these crystalline sheets of carbon just one atom thick can be used to build ultrafast computers and other electronic, photonic, and plasmonic devices on the nanoscale.

Scientists working at the Advanced Light Source (ALS) at the U.S. Department of Energy’s Lawrence Berkeley National Laboratory have discovered striking new details about the electronic structure of , crystalline sheets of carbon just one atom thick. An international team led by Aaron Bostwick and Eli Rotenberg of the ALS found that composite particles called plasmarons play a vital role in determining graphene’s properties.

“The interesting properties of graphene are all collective phenomena,” says Rotenberg, an ALS senior staff scientist responsible for the scientific program at ALS beamline 7, where the work was performed. “Graphene’s true can’t be understood without understanding the many complex interactions of electrons with other particles.”

The electric charge carriers in graphene are negative electrons and positive holes, which in turn are affected by plasmons—density oscillations that move like through the “liquid” of all the electrons in the material. A plasmaron is a composite particle, a charge carrier coupled with a .

“Although plasmarons were proposed theoretically in the late 1960s, and indirect evidence of them has been found, our work is the first observation of their distinct energy bands in graphene, or indeed in any material,” Rotenberg says.

Understanding the relationships among these three kinds of particles—charge carriers, plasmons, and plasmarons—may hasten the day when graphene can be used for “plasmonics” to build ultrafast computers—perhaps even room-temperature quantum computers—plus a wide range of other tools and applications.

Strange graphene gets stranger

“Graphene has no band gap,” says Bostwick, a research scientist on beamline 7.0.1 and lead author of the study. “On the usual band-gap diagram of neutral graphene, the filled valence band and the empty conduction band are shown as two cones, which meet at their tips at a point called the Dirac crossing.”

Graphene is unique in that electrons near the Dirac crossing move as if they have no mass, traveling at a significant fraction of the speed of light. Plasmons couple directly to these elementary charges. Their frequencies may reach 100 trillion cycles per second (100 terahertz, 100 THz)—much higher than the frequency of conventional electronics in today’s computers, which typically operate at about a few billion cycles per second (a few gigahertz, GHz).

Plasmons can also be excited by photons, particles of light, from external sources. Photonics is the field that includes the control and use of light for information processing; plasmons can be directed through channels measured on the nanoscale (billionths of a meter), much smaller than in conventional photonic devices.

And since the density of graphene’s electric charge carriers can easily be influenced, it is straightforward to tune the electronic properties of graphene nanostructures. For these and other reasons, says Bostwick, “graphene is a promising candidate for much smaller, much faster devices—nanoscale plasmonic devices that merge electronics and photonics.”

The usual picture of graphene’s simple conical bands is not a complete description, however; instead it’s an idealized picture of “bare” electrons. Not only do electrons (and holes) continually interact with each other and other entities, the traditional band-gap picture fails to predict the newly discovered plasmarons revealed by Bostwick and his collaborators.

The team reports their findings and discuss the implications in “Observations of plasmarons in quasi-free-standing doped graphene,” by Aaron Bostwick, Florian Speck, Thomas Seyller, Karsten Horn, Marco Polini, Reza Asgari, Allan H. MacDonald, and Eli Rotenberg, in the 21 May 2010 issue of Science, available online to subscribers.

Graphene is most familiar as the individual layers that make up graphite, the pencil-lead form of carbon; what makes graphite soft and a good lubricant is that the single-atom layers readily slide over one another, their atoms strongly bonded in the plane but weakly bonded between planes. Since the 1980s, graphene sheets have been rolled-up into carbon nanotubes or closed buckyball spheroids. Theorists long doubted that single graphene sheets could exist unless stacked or closed in on themselves.

Then in 2004 single graphene sheets were isolated, and graphene has since been used in many experiments. Graphene sheets suspended in vacuum don’t work for the kind of electronic studies that Bostwick and Rotenberg perform at ALS beamline 7.0.1. They use a technique known as angle-resolved photoemission spectroscopy (ARPES); for ARPES, the surface of the sample must be flat. Free-standing graphene is rarely flat; at best it resembles a crumpled bedsheet.

Using electrons to draw images of composite particles

“One of the best ways to grow a flat sheet of graphene is by heating a crystal of silicon carbide,” Rotenberg says, “and it happens that our German colleagues Thomas Seyller from the University of Erlangen and Karsten Horn from the Fritz Haber Institute in Berlin are experts at working with silicon carbide. As the silicon recedes from the surface it leaves a single carbon layer.”

Plasmonic Promises: First Observation of Plasmarons in Graphene
The “bare electron” band-gap diagram of neutral graphene (right) shows the filled valence band and the empty conduction band forming two cones that meet at the Dirac crossing (arrow). But even low-resolution ARPES results (left) suggest that below the Dirac crossing, the energy and momentum distribution of charge carriers is not that simple.

Using flat graphene made this way, the researchers hoped to study graphene’s intrinsic properties by ARPES. First a beam of soft x-rays from the ALS frees electrons from the graphene (photoemission). Then by measuring the direction (angle) and speed of the emitted electrons, the experiment recovers their energy and momentum; the spectrum of the cumulative emitted electrons is transmitted directly onto a two-dimensional detector.

The result is an image of the electronic bands created by the electrons themselves. In the case of graphene, the picture is x shaped, a cross-sectional cut through the two conical bands.

“Even in our initial experiments with graphene, we suspected that the ARPES distribution was not quite as simple as the two-cone, bare-electron model suggested,” Rotenberg says. “At low resolution there appeared to be a kink in the bands at the Dirac crossing.” Because there really is no such thing as a bare electron, the researchers wondered if this fuzziness was caused by charge carriers emitting plasmons.

“But theorists thought we should see even stronger effects,” says Rotenberg, “and so we wondered if the substrate was influencing the physics. A single layer of carbon atoms resting on a silicon carbide substrate isn’t the same as free-standing graphene.”

Plasmonic Promises: First Observation of Plasmarons in Graphene
Detailed ARPES results reveal that the energy bands of ordinary charge carriers (holes) meet at a single point, but conical bands of plasmarons meet at a second, lower Dirac crossing. Between these crossings lies a ring where the hole and plasmaron bands cross. The new band picture indicates how strongly plasmons couple to the charge carriers in graphene.

The silicon-carbide substrate could in principle weaken the interactions between charges in the graphene (on most substrates the electronic properties of graphene are disturbed, and the plasmonic effects can’t be observed). Therefore the team introduced hydrogen atoms that bonded to the underlying silicon carbide, isolating the graphene layer from the substrate and reducing its influence. Now the graphene film was flat enough to study with ARPES but sufficiently isolated to reveal its intrinsic interactions.

The images obtained by ARPES actually reflect the dynamics of the holes left behind after photoemission of the electrons. The lifetime and mass of excited holes are strongly subject to scattering from other excitations such as phonons (vibrations of the atoms in the crystal lattice), or by creating new electron-hole pairs.

“In the case of graphene, the electron can leave behind either an ordinary hole or a hole bound to a plasmon—a plasmaron,” says Rotenberg.

Taken together, the interactions dramatically influenced the ARPES spectrum. When the researchers deposited potassium atoms atop the layer of carbon atoms to add extra to the graphene, a detailed ARPES picture of the Dirac crossing region emerged. It revealed that the energy bands of graphene cross at three places, not one.

Ordinary holes have two conical bands that meet at a single point, just as in the bare-electron, non-interacting picture. But another pair of conical bands, the plasmaron bands, meets at a second, lower Dirac crossing. Between these crossings lies a ring where the hole and plasmaron bands cross.

“By their nature, plasmons couple strongly to photons, which promises new ways for manipulating light in nanostructures, giving rise to the field of plasmonics,” Rotenberg says. “Now we know that plasmons couple strongly to the charge carriers in graphene, which suggests that graphene may have an important role to play in the merging fields of electronics, photonics, and plasmonics on the nanoscale.”

Citation: Plasmonic Promises: First Observation of Plasmarons in Graphene (2010, May 20) retrieved 8 December 2023 from
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Graphene: What projections and humps can be good for


Feedback to editors