This article has been reviewed according to Science X's editorial process and policies. Editors have highlighted the following attributes while ensuring the content's credibility:

fact-checked

trusted source

written by researcher(s)

proofread

Lighting a fire using friction requires an understanding of physics principles—there are ways to make the process easier

friction
Credit: Pixabay/CC0 Public Domain

Humans have been making fire using friction for thousands of years, with evidence of its use found in archaeological records across different cultures worldwide.

Fire by friction is a testament to human ingenuity, contributing to the development of early technology and a later understanding of physics, chemistry and .

Making , one of the key discoveries in , has played a pivotal role in human evolution, providing warmth, light, protection from predators, a means to cook and the ability to migrate into more hostile climates.

I'm an engineering professor, avid outdoorsman and Minisino Firecrafter who's been studying and practicing fire by friction for many years. It's a great way to explore key science concepts while engaging in a practice that humans have been performing for millennia.

Ember, flame, fire

Fire by friction relies on the conversion of mechanical energy into thermal energy through friction. Friction is the force of resistance between two surfaces when they slide, or attempt to slide, past one another.

There are many ways to create fire by friction, but the most common and easiest to learn uses a bow drill set.

A bow drill set consists of a thin , a hearth board, a lightly curved bow, to which a bow cord is attached, and a "thunderhead" or bearing block, which is a stone or block of hard wood with a natural or carved divot used to press down on the top of the spindle.

First, the firemaker wraps the bow cord tightly around the spindle and uses it to rapidly spin the spindle against the hearth board, while simultaneously pressing down with the thunderhead.

The friction of the spindle against the hearth board creates heat – kind of like how your hands warm up when you rub them together.

Similar to how your hands become warmer when you vigorously rub them together, friction causes a rapid increase in temperature where the spindle meets the hearth board. This drives away any residual moisture. The wood also heats up mostly in the absence of oxygen, resulting in charring, a from incomplete combustion. What's left over is mostly carbon.

As the spindle continues to spin, it grinds away the charred wood to form a small pile of charcoal dust. As the dust pile grows, it will eventually coalesce and ignite to form an ember.

The ember's ignition point depends on a variety of factors, including the type of wood, the temperature and the humidity. Experiments often yield ignition temperatures in the range of 650-800 degrees Farenheit (340-430 degrees Celsius), with the most reliable estimates on the order of 700 degrees F (370 degrees C). Getting to this temperature is essential to create an ember and start the fire.

After an ember forms, the firemaker then transfers it to a tinder bundle made of dry leaves or grass, dead tree bark or other fibrous organic materials. The firemaker blows into the tinder bundle to further raise the temperature by increasing oxygen flow.

Eventually, the tinder bursts into flame, after which the firemaker can kindle it into a larger fire. Young fires are usually fragile—if the firemaker doesn't provide them with enough fuel, air flow and protection from the wind and rain, they can go out.

Work smarter, not harder

Understanding the physics of fire by friction and the different variables involved can make a big difference and help the fire start more quickly with less effort.

First, keep it small. Firemakers should make bow drill sets carved from standing dead, dry tree limbs maybe an inch or so (2.5 centimeters) in diameter. Optimal spindles have diameters between three-eighths of an inch and a half-inch (1-1.25 cm).

How fast the friction force generates heat is directly proportional to how fast the firemaker bows, on average, and is independent of the diameter of the spindle. So, the faster you move the bow, the more heat you will create, regardless of the spindle's size.

The smoke you see rising from a fire results from incomplete combustion.

But because they have smaller cross-sectional areas, thin spindles increase the heat density at the spindle-hearth board interface, which is where the ember forms and ignites. By concentrating the heat in a smaller area at this interface, thin spindles reduce the time and effort required to form and ignite an ember.

Dry, unpigmented, medium-density woods—elm, poplar and cottonwood are some examples—will work well for the spindle and the hearth board. I've tested lots of wood types and found that, with a few exceptions, wood hardness mostly doesn't matter.

I've also found that mature wildflower stalks—harvested fresh and allowed to dry out—work well as spindles. Tall, woody wildflowers like goldenrod, ironweed, teasel, mullein and the like can produce embers in seconds. If time permits, you can even make a bow cord with natural fibers extracted from flax, dogbane or nettle plants commonly found in the woods.

The fire-making process

The key variables the firemaker can control during the bowing process are the speed at which they're moving the bow and how much pressure they're applying to the spindle via the thunderhead. Start by seating the spindle tip into a notched divot carved into the hearth board. Then move the bow slowly until you get your balance.

Initially press down with the thunderhead just hard enough for pyrolysis to begin. Pyrolysis happens when heat causes organic material to decompose without oxygen. You'll know when pyrolysis starts because you'll see smoke rising from the spindle-hearth board interface.

Then, begin to increase you bow speed until you are bowing as rapidly as you can sustain for a minute or so. Don't hold your breath, and use bow strokes as long as you can manage without compromising bow speed. The time it takes to form an ember decreases the faster you bow, though the length of your stroke doesn't matter.

As speed increases, begin to increase the pressure you're putting on the spindle, stopping when the increased friction begins to affect your ability to sustain a rapid bow speed. With good materials you'll likely have a nice ember in well under a minute.

While has largely replaced primitive methods, fire by continues to be a source of fascination and a testament to human ingenuity. Understanding this process not only enriches humanity's connection to the ancient past, but it also underscores how physics comes into play throughout daily life.

Provided by The Conversation

This article is republished from The Conversation under a Creative Commons license. Read the original article.The Conversation

Citation: Lighting a fire using friction requires an understanding of physics principles—there are ways to make the process easier (2023, December 14) retrieved 12 April 2024 from https://phys.org/news/2023-12-friction-requires-physics-principlesthere-ways.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Control over friction, from small to large scales

48 shares

Feedback to editors