Researchers create first supermode optical resonator

Researchers create first supermode optical resonator
The experimental realization of cascaded-mode resonators in integrated photonics. a SEM pictures of the cascaded-mode resonator show two mode converters connected via a multimode waveguide of width wwg and length Lwg. Multimode waveguides located before and after the resonator guide telecom light into and outside the resonator. The mode converters are realized by corrugating the silicon waveguide laterally into the shape of a rectangular grating of periodicity Λ and width wg. Scalebar = 5 μm and 2 μm (inset). The periodicity Λ is chosen such that the phase-matching condition is satisfied for contra-directional coupling. The entire photonic circuit ridge is buried into a silica layer. b Schematic of the device shows three different sections: 1. two input waveguides (left) that allow to probe the resonator with either TE0 (upper) or TE2 (lower), 2. the resonator region consisting of the multimode waveguide enclosed by the two mode converters, and 3. two analyzer waveguides which transmit the output of the resonator into two spatially separated locations, depending on its transverse profile TE0 (upper) or TE2 (lower). Probe 1 excites the TE0 mode in the top waveguide. Probe 2 excites the TE0 in the lower waveguide. This mode is converted into the TE2 mode in the top multimode waveguide prior to the resonator via the forward-mode coupler, which operates on the principle that the effective index of the TE0 mode in the nano-waveguide corresponds to the effective index of the TE2 mode in the multimode waveguide. Similarly analyzer 1 and analyzer 2 measure TE0 and TE2 modes, respectively. Spatially, the coupling occurs at the location where the nanowaveguide is in the immediate vicinity of the multimode waveguide. c Full-wave simulations of the telecom fields inside the cascaded-mode resonator demonstrate that self-consistent solutions of the round-trip condition occur at the same input wavelength for two distinct transverse modes TE0 (upper) and TE2 (lower). d Zoom into marked white region inside the resonator reveals the hybrid nature of the cascaded modes that arise as a superposition of counter-propagating TE0 or TE2 modes with a characteristic beating length that does not depend on the input probe field. Credit: Nature Communications (2023). DOI: 10.1038/s41467-023-35956-9

What does it take for scientists to push beyond the current limits of knowledge? Researchers in Federico Capasso's group at the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) have developed an effective formula.

"Dream big, question everything we know, question the textbooks," says Vincent Ginis, a visiting professor at SEAS and first author on a new paper in Nature Communications reporting a breakthrough in optical resonator technology."That's how Federico asks our lab team to work together. He challenges us to rethink all the classical rules to see if we can make devices do things better and in novel ways."

That approach led to the team's latest result, an optical resonator capable of manipulating light in never-before-observed ways. The breakthrough could influence how resonators are understood and open doors for new capabilities.

"This is an advance that alters in a fundamental way the design of resonators by using reflectors that convert light from one pattern to another as it bounces back and forth," says Capasso, the Robert L. Wallace Professor of Applied Physics and Vinton Hayes Senior Research Fellow in Electrical Engineering at SEAS.

Optical resonators play a key role in many aspects of modern life.

"Resonators are central components in most applications of optics, lasers, microscopy, sensing—they appear in all of these technologies as essential building blocks," says Ginis, who is also an assistant professor of mathematics and physics at the Vrije Universiteit Brussel. "They consist of two reflectors that bounce light back and forth, concentrating light in lasers for example, or filtering out frequencies of light such as in and telecommunications."

Optical resonators are key to telecommunications transmissions, encoding images and audio through frequencies of light.

"Each message, to keep separate from the others, is encoded on its own specific frequency," Ginis says. "Resonators allow us to 'tape off' exact, unique frequencies to allow many different messages to be transmitted simultaneously."

Until now, resonators and the two reflective mirrors inside them controlled the intensity and frequency of light, but not the mode of light, which determines the shape and manner in which photons flow through space and time. We often think of light as moving in a beam like a straight line, but beams of light are also capable of traveling in other modes, like spirals. The new optical resonator developed by Capasso's team is the first such device that gives scientists over the mode of light, and even more importantly, enables multi-mode coupled light to exist within the resonator.

The team achieved this by etching a new type of pattern on the surface of the reflectors at each end of the resonator device.

"We realized that we could test our novel resonator concept in an integrated photonics platform, and chose silicon-on-insulator, which is used by many scientists and companies for applications such as sensing or communications," says Cristina Benea-Chelmus, a research associate in the Capasso group and assistant professor of microengineering at the EPFL Institute of Electro and Microengineering, who spearheaded the experimental part of the work.

The etchings, about 300-600 nanometers in size, gave the team control over the shape of light beams inside the resonator. Using reflectors with different patterns on either end of the resonator unlocked their ability to change the shape of light as it moves.

"We can make these light modes play with each other, turning one mode into another, and then back into the first mode, creating loops of different light modes moving through the same space," Ginis says. "When we saw this, we realized we were in 'terra incognita' here."

Combining more than one mode of light creates what the researchers called a "supermode."

"In traditional resonators, as light moves back and forth, the mode is always the same—the properties of light are always symmetric," he says. "In ours, as light goes from left to right, or right to left, the modes are different. We've figured out how to break symmetry inside a resonator."

"Having multimode control of light will have a huge impact on the bandwidth of information that can be transmitted using light," he says. "It opens up many channels of transmission that we haven't been able to access simultaneously until now."

The Capasso team's provides a new tool to conduct fundamental physics experiments, including optomechanics, using light to make things move.

"By placing an object inside a resonator, you can manipulate materials like tiny atoms, molecules, and strands of DNA," Ginis says. The new device, with its supermode capabilities, could unlock new degrees of freedom for researchers to manipulate miniscule materials with different shapes of light beams.

"By questioning the foundations of textbook theory, we have discovered completely new and counterintuitive properties of light not found in traditional resonators," Capasso says. These properties, including "mode-independent resonances and directionally dependent propagation," unlock unforeseen opportunities for photonics, acoustics, and beyond, he adds.

More information: Vincent Ginis et al, Resonators with tailored optical path by cascaded-mode conversions, Nature Communications (2023). DOI: 10.1038/s41467-023-35956-9

Provided by Harvard University

Citation: Researchers create first supermode optical resonator (2023, February 2) retrieved 23 March 2023 from
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Team realizes strong indirect coupling in distant nanomechanical resonators


Feedback to editors