High-sensitivity nanophotonic sensors with passive trapping of analyte molecules in hot-spots

High-sensitivity nanophotonic sensors with passive trapping of analyte molecules in hot-spots
Top: schematic of the optical sensor design with trapped molecules. Bottom: schematic showing the process of concentrating and trapping molecules in a solution. Credit: Xianglong Miao, Lingyue Yan, Yun Wu and Peter Q. Liu

Optical sensors can quantitatively analyze chemical and biological samples by measuring and processing the optical signals produced by the samples. Optical sensors based on infrared absorption spectroscopy can achieve high sensitivity and selectivity in real time, and therefore play a crucial role in a variety of application areas such as environmental sensing, medical diagnostics, industrial process control and homeland security.

In a new paper published in Light: Science & Applications, a team of scientists, led by Dr. Peter Q. Liu from the Department of Electrical Engineering, the State University of New York at Buffalo, have demonstrated a new type of high-performance optical sensor which can utilize the surface tension of liquid to concentrate and trap analyte at the most sensitive locations of the device structure, and hence significantly enhance the sensitivity performance. Based on a metal-insulator-metal sandwich structure which also features nanometer scale trenches, the sensor can passively retain and concentrate an analyte solution in these tiny trenches as the solution gradually evaporates on the sensor surface, and eventually trap the precipitated analyte molecules inside these trenches. As the light intensity is also highly enhanced in these trenches by design, the interaction between light and the trapped analyte molecules is drastically enhanced, leading to a readily detectable optical signal (i.e. changes in the light spectrum) even at picogram level of analyte mass.

In general, different molecular species absorb infrared light at different frequencies, and therefore one can identify and quantify the detected molecules by analyzing the observed absorption lines in the spectrum. Although such molecular absorption is intrinsically weak, optical can drastically enhance the molecular absorption by employing suitable nanostructures on the device surface to confine light into very small volumes (so called hot-spots), which leads to very large . In doing so, each molecule in the hot-spots can absorb much more light in a given time interval than a molecule outside the hot-spots, which makes it possible to measure very low quantity of chemical or biological substances with high reliability, if enough molecules are located in the hot-spots. This general approach is also called surface enhanced infrared absorption (SEIRA).

However, a key issue for most SEIRA optical sensors is that the hot-spots only occupy a tiny portion of the entire device surface area. On the other hand, the analyte molecules are usually randomly distributed on the device surface, and hence only a small fraction of all analyte molecules are located in the hot-spots and contribute to the enhanced absorption. "The SEIRA signal would be much larger if most of the analyte molecules can be delivered into the hot-spots of an optical sensor. This is the key motivation of our optical sensor design." Dr. Liu said.

"There are techniques, such as optical tweezers and dielectrophoresis, which can manipulate small particles or even molecules and deliver them to target locations such as the hot-spots. However, these techniques requires significant amount of energy input and are also complicated to utilize." Dr. Liu added, "What we set out to explore is a device structure that can trap molecules precipitated out of a solution into the hot-spots in a passive (requiring no energy input) and effective way, and we realized that we can make use of the tension of liquid to achieve this goal."

In additional to the demonstration of biomolecule sensing, the team also conducted another set of experiments, which showed that the same type of device structure also achieved effective trapping of liposome particles (~100nm characteristic dimension) in the tiny trenches. This means such optical sensors can be optimized for detecting and analyzing nano-objects such as viruses or exosomes, which have similar sizes as the liposomes used in the experiments.

The scientists believe that the demonstrated SEIRA optical sensor design strategy can be applied to other types of as well. Besides sensing applications, such device structures can also be used for manipulating nanoscale objects including exosomes, viruses and quantum dots.

Explore further

New optical device could help detect drugs, bomb-making chemicals and more

More information: Xianglong Miao et al, High-sensitivity nanophotonic sensors with passive trapping of analyte molecules in hot spots, Light: Science & Applications (2021). DOI: 10.1038/s41377-020-00449-7
Journal information: Light: Science & Applications

Citation: High-sensitivity nanophotonic sensors with passive trapping of analyte molecules in hot-spots (2021, January 13) retrieved 18 January 2021 from https://phys.org/news/2021-01-high-sensitivity-nanophotonic-sensors-passive-analyte.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Feedback to editors

User comments