Mixing silk with polymers could lead to better biomedical implants

Mixing silk with polymers could lead to better biomedical implants
Combining silk fabric with epoxy creates laminates that can be formed into shapes, like the structure above, for medical uses. Credit: Jiao Wen & Juan Guan

Spun by spiders and silkworms, silk has mystified human engineers who have yet to figure out how to artificially recreate this tough, fine fiber. But by combining silk, which is safe for use in the human body, with synthetic compounds, one research team is getting closer to developing new implantable composite materials with the best properties of both. Potential applications, which are still years away, could include structures that hold bone in place after surgery or replacements for the cartilage cushions in the knee.

The researchers will present their results today at the American Chemical Society (ACS) Fall 2020 Virtual Meeting & Expo.

"Silk has great potential for use in biomedical applications," says Juan Guan, Ph.D., the project's principal investigator. "Silk is versatile, and the human tolerates it quite well, and can even degrade and absorb it."

Silk has a long history in medicine. Records of ancient doctors stitching up patients with fibers spun by silkworms date back nearly 2,000 years. And today, surgeons finish certain surgeries, such as those on the eye, with sutures.

By combining silk and , Guan and her colleagues at Beihang University are seeking to develop versatile new materials for use in medicine and, potentially, other fields as well. While other researchers have already developed composite materials with silk, they have typically worked with short fibers or the primary protein in silk. Guan, however, focuses on silk fabric woven from a long, single thread. Silkworms' cocoons can contain fibers nearly 5,000 feet long, and when used whole in fabric, such a fiber can more effectively distribute mechanical stress than a series of shorter, discrete ones, she says. In their studies, Guan's team uses silk from the common, domesticated silkworm Bombyx mori, as well as tougher, more stretchy fibers from the wild species Antheraea pernyi.

The researchers combine this fabric with a polymer matrix, often an epoxy, which is used in adhesives. Together, the fabric and the polymer form a laminate—similar to the durable surface covering found on some furniture—which can then be cut into the shapes the researchers need.

Guan and her colleagues say that the properties of these new materials could make them a better match for the tissues within the human body than what is being used today. For instance, they are collaborating with orthopedic doctors to devise structures resembling cages that temporarily hold vertebrae in place as they fuse after surgery, a task currently accomplished mostly using metal. The silk composites' hardness and stiffness is more compatible with bone, making them potentially more resilient yet more comfortable than metal structures, she says.

There are challenges, however. The inside of the human body is moist, a potential problem because water can soften and weaken silk. In new experiments, Guan and her colleagues tested how silk-epoxy hold up when exposed to humidity or immersed in water. For use alongside bone, they must maintain a certain stiffness. The experiments showed that while this attribute decreased under wetter conditions, the composites remained stiff enough to function as implants, she says.

While the epoxy attaches firmly to the silk fiber, it has a major drawback: The body can't break down the epoxy and absorb it, meaning it would not be suitable for implants intended to dissolve. So, Guan recently began working with biopolymers that, like silk, the body can break down and absorb. However, these composites have less internal cohesion than those that contain an epoxy. "The key question is how to make the interface between the biopolymer and the silk fabric more robust," she says.

The scientists are also looking to supplement silk with other types of fibers. In a recent study, they added carbon fibers into the mix. "The notion of hybridizing silk with other fibers makes it possible to produce a rather nice spectrum of properties that you can optimize for a given application," says Robert O. Ritchie, Ph.D, an author of the carbon fiber study. Potential uses for these new structural materials, he says, could be anywhere: in the , or even in tennis rackets or on airplane engines.


Explore further

Spider silk can create lenses useful for biological imaging

More information: Greener and tougher composites from natural silks:

Abstract
Natural silks as structural materials possess superior toughness via balanced strength and extensibility. Wild Antheraea pernyi (Ap) cocoons are 5 times tougher than the common Bombyx mori (Bm) cocoons, owing to the twice stretchier silk fibers. In our laboratory, we integrate natural Ap and Bm silks and synthetic polymer matrices and create a series of composites with unprecedent properties. On top of the biodegradability and biocompatibility granted for silk, the composites from silk displays superior mechanical toughness and salient fracture behaviours similar to natural structural materials. In addition, the mechanical performance and economy of silk-based composites can be further modulated by high-performance synthetic fibres such as carbon fibre and natural flax fibre from plants. Integrating natural high-performance fibres and tailorable synthetic polymers presents a novel route to structural materials, and can be explored further to build biomedical devices.

Citation: Mixing silk with polymers could lead to better biomedical implants (2020, August 17) retrieved 28 November 2020 from https://phys.org/news/2020-08-silk-polymers-biomedical-implants.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
347 shares

Feedback to editors

User comments