Scientists print all-liquid 3-D structures

March 27, 2018 by Dan Krotz, Lawrence Berkeley National Laboratory
Scientists print all-liquid 3-D structures
These schematics show the printing of water in oil using a nanoparticle supersoap. Gold nanoparticles in the water combine with polymer ligands in the oil to form an elastic film (nanoparticle supersoap) at the interface, locking the structure in place. Credit: Berkeley Lab

Scientists from the Department of Energy's Lawrence Berkeley National Laboratory (Berkeley Lab) have developed a way to print 3-D structures composed entirely of liquids. Using a modified 3-D printer, they injected threads of water into silicone oil—sculpting tubes made of one liquid within another liquid.

They envision their all-liquid material could be used to construct liquid electronics that power flexible, stretchable devices. The scientists also foresee chemically tuning the tubes and flowing molecules through them, leading to new ways to separate molecules or precisely deliver nanoscale building blocks to under-construction compounds.

The researchers have printed threads of between 10 microns and 1 millimeter in diameter, and in a variety of spiraling and branching shapes up to several meters in length. What's more, the material can conform to its surroundings and repeatedly change shape.

"It's a new class of material that can reconfigure itself, and it has the potential to be customized into liquid reaction vessels for many uses, from chemical synthesis to ion transport to catalysis," said Tom Russell, a visiting faculty scientist in Berkeley Lab's Materials Sciences Division. He developed the material with Joe Forth, a postdoctoral researcher in the Materials Sciences Division, as well as other scientists from Berkeley Lab and several other institutions. They report their research March 24 in the journal Advanced Materials.

The material owes its origins to two advances: learning how to create liquid tubes inside another liquid, and then automating the process.

Credit: Lawrence Berkeley National Laboratory

For the first step, the scientists developed a way to sheathe tubes of water in a special nanoparticle-derived surfactant that locks the water in place. The surfactant, essentially soap, prevents the tubes from breaking up into droplets. Their surfactant is so good at its job, the scientists call it a nanoparticle supersoap.

The supersoap was achieved by dispersing into water and polymer ligands into oil. The gold nanoparticles and polymer ligands want to attach to each other, but they also want to remain in their respective water and oil mediums. The ligands were developed with help from Brett Helms at the Molecular Foundry, a DOE Office of Science User Facility located at Berkeley Lab.

In practice, soon after the water is injected into the oil, dozens of ligands in the oil attach to individual nanoparticles in the water, forming a nanoparticle supersoap. These supersoaps jam together and vitrify, like glass, which stabilizes the interface between oil and water and locks the liquid structures in position.

"This stability means we can stretch water into a tube, and it remains a tube. Or we can shape water into an ellipsoid, and it remains an ellipsoid," said Russell. "We've used these nanoparticle supersoaps to print tubes of water that last for several months."

Next came automation. Forth modified an off-the-shelf 3-D printer by removing the components designed to print plastic and replacing them with a syringe pump and needle that extrudes liquid. He then programmed the printer to insert the needle into the oil substrate and inject water in a predetermined pattern.

"We can squeeze liquid from a needle, and place threads of water anywhere we want in three dimensions," said Forth. "We can also ping the material with an external force, which momentarily breaks the supersoap's stability and changes the shape of the water threads. The structures are endlessly reconfigurable."

Explore further: Nanoparticle supersoap creates 'bijel' with potential as sculptable fluid

More information: Joe Forth et al. Reconfigurable Printed Liquids, Advanced Materials (2018). DOI: 10.1002/adma.201707603 , onlinelibrary.wiley.com/doi/fu … .1002/adma.201707603

Related Stories

Squeezing into the best shape

February 15, 2018

Until now, producing liquids that can be shaped and reshaped on demand hasn't been possible. Scientists discovered a simple way to form stabilized droplets in a variety of structures. Tightly packed nanoparticle-polymer assemblies ...

Exotic shapes for liquid drops have many applications

December 3, 2013

(Phys.org) —Oil and water don't mix, as any chemist or cook knows. Tom Russell, a polymer scientist from the University of Massachusetts who now holds a Visiting Faculty appointment with Berkeley Lab's Materials Sciences ...

Recommended for you

System monitors radiation damage to materials in real-time

December 18, 2018

In order to evaluate a material's ability to withstand the high-radiation environment inside a nuclear reactor, researchers have traditionally used a method known as "cook and look," meaning the material is exposed to high ...

Scientists design new material to harness power of light

December 17, 2018

Scientists have long known that synthetic materials—called metamaterials—can manipulate electromagnetic waves such as visible light to make them behave in ways that cannot be found in nature. That has led to breakthroughs ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.