A new low-cost battery offers a hefty voltage and sustained energy capacity

July 26, 2017, Agency for Science, Technology and Research (A*STAR), Singapore
A new low-cost battery offers a hefty voltage and sustained energy capacity
Nickel cobalt oxide nanowires — less than 100 nanometers across and roughly 3.5 micrometers long — boost the performance of the hybrid zinc battery. Credit: A*STAR Institute of Materials Research and Engineering

A zinc-based battery that delivers a high voltage and substantial energy capacity could be set to rival conventional lithium-ion batteries, A*STAR researchers have found.

The proliferation of electric vehicles and is driving demand for that store and deliver large amounts of energy safely, efficiently and inexpensively. Zinc-based batteries offer some key advantages over lithium-ion, including low-cost and non-flammability. Kilo per kilo, -air batteries can potentially store five times more energy than lithium-ion, while zinc-nickel batteries produce relatively high voltages (potentially useful because fewer batteries would be needed to power a device). Yet zinc batteries also tend to lose their energy storage capacity after just a few hundred recharging cycles, and no zinc has yet combined both a decent of more than 1.5 volts and a high energy storage capacity.

Yun Zong and Zhaolin Liu of the A*STAR Institute of Materials Research and Engineering and colleagues have now developed a hybrid zinc battery that combines the best of zinc-air and zinc-nickel technologies, completing over 5,000 charging cycles with no loss of performance. The battery has a zinc anode, while its cathode is based on a carbon-coated nickel foam covered with nickel cobalt oxide nanowires. The liquid electrolyte between the electrodes contains hydroxide anions dissolved in water.

A key reason for the battery's excellent performance is that the cathode works in two distinct ways during charging and discharging. When the battery charges, hydroxide ions from the electrolyte react with metal oxides in the cathode to produce oxyhydroxide compounds, freeing electrons. But the metals in the cathode also act as a catalyst, combining hydroxide anions to produce oxygen, water, and more electrons. These electrons flow around the circuit to the anode, where they combine with zinc ions in the electrolyte to produce zinc metal. During discharge, these electrochemical processes are reversed.

The battery has a stable two-step discharge voltage between 1.75 and 1.0 volts, and maintained its performance over three months of continuous testing, vastly outstripping previous zinc batteries. Zong estimates that the battery can store about 270 Watt-hours per kilogram, with potential for improvement. "This is already on a par with lithium-ion batteries available on the market," he says.

The two chemical processes at the produce different voltages, which could be an advantage for applications that initially require a higher voltage, such as unmanned aerial vehicles that need an boost to get airborne and then a lower voltage to sustain their flight. The team now hopes to improve the battery's cycle life, perhaps by using a porous , and to increase the capacity of the zinc-nickel portion of the battery.

Explore further: Three-layer nanoparticle catalysts improve zinc-air batteries

More information: Bing Li et al. A Robust Hybrid Zn-Battery with Ultralong Cycle Life, Nano Letters (2016). DOI: 10.1021/acs.nanolett.6b03691

Related Stories

Recommended for you

How to mass produce cell-sized robots

October 23, 2018

Tiny robots no bigger than a cell could be mass-produced using a new method developed by researchers at MIT. The microscopic devices, which the team calls "syncells" (short for synthetic cells), might eventually be used to ...

Nanosized ferroelectrics become a reality

October 22, 2018

Using ferroelectricity instead of magnetism in computer memory saves energy. If ferroelectric bits were nanosized, this would also save space. But conventional wisdom dictates that ferroelectric properties disappear when ...

Taking steps toward a wearable artificial kidney

October 17, 2018

There just aren't enough kidney transplants available for the millions of people with renal failure. Aside from a transplant, the only alternative for patients is to undergo regular dialysis sessions to clear harmful cellular ...

2 comments

Adjust slider to filter visible comments by rank

Display comments: newest first

JRi
not rated yet Jul 31, 2017
"The team now hopes to improve the battery's cycle life, perhaps by using a porous zinc anode, and to increase the capacity of the zinc-nickel portion of the battery."

I don't get it. They claim 5000 charging cycles without no loss of performance. They also claim that the capacity is "on a par with lithium-ion batteries available on the market". So why would do they want to improve these properties. Just put it to market as it is. Those numbers are good enough.
antialias_physorg
5 / 5 (3) Jul 31, 2017
Just put it to market as it is. Those numbers are good enough.

With the relatively new approach the potential improvements could be low hanging fruit. Think how bad it would be to just pump this out when 6 months later someone can improve upon this twofold.
People who manufacture stuff want to have mature technologies that are likely not to be improved upon in the near future (read: cash cows)

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.