A novel method for the fabrication of active-matrix 3-D pressure sensors

April 5, 2017, Ulsan National Institute of Science and Technology
Transistor-type active-matrix 3-D pressure sensors with air-dielectric layers. Credit: UNIST

A recent study, affiliated with UNIST has created a three-dimensional, tactile sensor that could detect wide pressure ranges from human body weight to a finger touch. This new sensor with transparent features is capable of generating an electrical signal based on the sensed touch actions, also, consumes far less electricity than conventional pressure sensors.

The breakthrough comes from a research, conducted by Professor Jang-Ung Park of Materials Science and Engineering and his research team at UNIST. In the study, the research team presented a novel method of fabricating a transistor-type active-matrix sensor using foldable substrates and air-dielectric layers.

Today, most transistors are created with silicon channel and silicon oxide-based dielectrics. However, these transistors have been found to be either lacking transparency or inflexible, which may hinder their utility in fabricating highly-integrated pressure sensor arrays and transparent .

In this regard, Professor Park's team decided to use highly-conductive and transparent graphene transistors with air-dielectric layers. The sensor can detect different types of touch-including swiping and tapping..

"Using air as the dielectric layer in graphene field-effect transistors (FETs) can significantly improve transistor performance due to the clean interface between graphene channel and air," says Professor Park. "The thickness of the air-dielectric layers is determined by the applied pressure. With that technology, it would be possible to detect pressure changes far more effectively."

Pressure-sensitive graphene FETs with air-dielectric layers before (a) and after (b) the folding, respectively. Credit: UNIST

A convantional touch panel, which may be included in a display device, reacts to the static electrical when pressure is applied to the monitor screen. With this method, the position on screen contacted by a finger, stylus, or other object can be easily detected using changes in pressure, but can not provide the intensity of pressure.

The research team placed graphene channel, metal nanowire electrodes, as well as an elastic body capable of trapping air on one side of the foldable substrate. Then they covered the other side of the substrate, like a lid and kept the air. In this transistor, the force pressing the elastic body is transferred to the air-dielectric layer and alters its thickness. Such changes in the thickness of the air-dielectric layer is converted into an and transmitted via metal nanowires and the graphene channel, expressing both the position and the intensity of the pressure.

This is regarded as a promising technology as it enables the successful implementation of active-matrix pressure sensors. Moreover, when compared with the passive-matrix type, it consumes less power and has a faster response time.

It is possible to send and receive signals only by flowing electricity to the place where pressure is generated. The change in the thickness of the air dielectric is converted into an electrical signal to represent the position and intensity of the pressure. In addition, since all the substrates, channels, and electrode materials used in this process are all transparent, they can also be manufactured with invisible pressure sensors.

"This sensor is capable of simultaneously measuring anything from lower pressure (less than 10 kPa), such as gentle tapping to high pressure (above 2 MPa), such as human body weight," says Sangyoon Ji (Combined M.S./Ph.D. student of Materials Science and Engineering), the first co-author of the study. "It can be also applied to 3D touchscreen panels or smart running shoes that can analyze life patterns of people by measuring their weight distribution."

"This study not only solves the limitations of conventional pressure , but also suggests the possibility to apply them to various fields by combining pressure sensor with other electronic devices such as display." says Professor Park.

Explore further: New flexible sensor holds potential for foldable touch screens

More information: Sung-Ho Shin et al, Integrated arrays of air-dielectric graphene transistors as transparent active-matrix pressure sensors for wide pressure ranges, Nature Communications (2017). DOI: 10.1038/ncomms14950

Related Stories

Flexible and transparent pressure sensor

January 25, 2016

Healthcare practitioners may one day be able to physically screen for breast cancer using pressure-sensitive rubber gloves to detect tumors, owing to a transparent, bendable and sensitive pressure sensor newly developed by ...

Advances make reduced graphene oxide electronics feasible

March 30, 2017

Researchers at North Carolina State University have developed a technique for converting positively charged (p-type) reduced graphene oxide (rGO) into negatively charged (n-type) rGO, creating a layered material that can ...

Improving DNA-detecting transistors

February 24, 2017

Graphene-based transistors could soon help diagnose genetic diseases. Researchers in India and Japan have developed an improved method for using graphene-based transistors to detect disease-causing genes.

Recommended for you

Semimetals are high conductors

March 18, 2019

Researchers in China and at UC Davis have measured high conductivity in very thin layers of niobium arsenide, a type of material called a Weyl semimetal. The material has about three times the conductivity of copper at room ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.