Copper deposition to fabricate tiny 3D objects

January 20, 2016 by Fabio Bergamin
The objects shown in these microscope images have a width of 15 to 35 micrometres. In comparison, a human hair is approximately 50 micrometres wide. Credit: ETH Zurich / Luca Hirt

A new 3-D microprinting process allows scientists to easily manufacture tiny, complex metal components. The used technology was designed by ETH researchers years ago for biological research and has now been further developed for a completely different application.

Scientists at ETH Zurich have developed a new method of 3D microprinting. This can be used to manufacture even tiny, partly overhanging structures easily and in a single step. One day, this could pave the way for the manufacture of complex watch components or microtools for keyhole surgery, for example.

In most existing 3D microprinting processes, overhanging structures can be achieved only through a workaround: during the printing process, a stencil manufactured beforehand is used as a placeholder under the overhang that is to be printed. The template must be removed once printing is complete. In the new technique developed by ETH doctoral student Luca Hirt of the Laboratory of Biosensors and Bioelectronics, the print head can also print sideways. This means that overhangs can be printed without templates.

Tiny pipette

The new technique is a refinement of the FluidFM system developed at ETH Zurich several years ago. At the heart of this system is a moveable micropipette mounted on a leaf spring, which can be positioned extremely precisely. Nowadays, FluidFM is used primarily in and medicine; for example, to sort and analyse cells and to inject substances into individual cells. For three years now, the system has been sold commercially by the ETH spin-off Cytosurge.

The objects shown in these microscope images have a width of 15 to 35 micrometres. In comparison, a human hair is approximately 50 micrometres wide. Credit: ETH Zurich / Luca Hirt

As part of his doctoral thesis at ETH Zurich, Luca Hirt has been investigating the possibility of using FluidFM for printing processes. In particular, he is interested in using this technique to electro-deposit dissolved metals and other substances on to a conductive substrate.

Electrochemical reactions at the tip

The system now developed works as follows: a droplet of liquid is placed on a base plate made of gold. The tip of the micropipette penetrates the droplet and acts as a print head. A copper sulphate solution flows slowly and steadily through the pipette. Using an electrode, the scientists apply a voltage between the droplet and the substrate, causing a chemical reaction under the pipette aperture. The copper sulphate emerging from the pipette reacts to form solid copper, which is deposited on the base plate as a tiny 3D pixel.

Copper deposition to fabricate tiny 3-D objects
ETH researchers use a movable micropipette (blue) to manufacture tiny copper objects. Credit: ETH Zurich / Alain Reiser

Using a computer to control the movement of the micropipette, the researchers can print three-dimensional objects pixel by pixel and layer by layer. The spatial resolution of this process depends on the size of the pipette's aperture, which in turn determines the size of the copper deposits. At present, the scientists can produce individual 3D pixels with diameters ranging from 800 nanometres to more than five micrometres, and can combine these to form larger 3D objects. In an initial feasibility study, various spectacular microscopic objects were created. They consist of pure, non-porous copper and are mechanically stable, as studies by scientists from the group led by Ralph Spolenak, Professor of Nanometallurgy at ETH Zurich, showed. A particularly impressive object consists of three nested microspirals, which the ETH researchers manufactured in a single step and without using a template.

"This method can be used to print not only copper but also other metals," says Tomaso Zambelli, associate lecturer and group leader at the Laboratory of Biosensors and Bioelectronics at ETH Zurich. And FluidFM may even be suitable for 3D printing with polymers and composite materials, he says.

An advantage of the new method over other 3D microprinting processes is that the forces acting on the tip of the pipette can be measured via the deflection of the leaf spring on which the micropipette is mounted. "We can use this signal as feedback. Unlike other 3D printing systems, ours can detect which areas of the object have already been printed," says Hirt. This will make it easier to automate the printing process.

Successful collaboration with a spin-off

The scientists have submitted a patent application for the method. The scientists have submitted a patent application for the method. The ETH spin-off Cytosurge has now licensed the method from ETH Zurich. Pascal Behr played a key role in developing FluidFM at ETH several years ago. Today, he is CEO of Cytosurge. "We see big market potential in the and an opportunity to further diversify our company," he says. "We are convinced of the idea of using FluidFM in 3D microprinting. Now, the task is to optimise this application in collaboration with interested researchers at universities and in industry—for example, in the watchmaking, medical technology and automotive sectors." Behr sees an initial application in the field of rapid prototyping, where microscopic components can be manufactured quickly and easily using 3D printing.

The long-established collaboration between ETH Zurich and Cytosurge will also continue. "It is a case of mutual give and take, from which both sides profit," says Zambelli. Cytosurge provides ETH with its latest equipment, which the ETH scientists are able to use for their research. They in turn help to test the devices and offer suggestions for improvements and further development.

Explore further: Nanowalls for smartphones

More information: Luca Hirt et al. Template-Free 3D Microprinting of Metals Using a Force-Controlled Nanopipette for Layer-by-Layer Electrodeposition, Advanced Materials (2016). DOI: 10.1002/adma.201504967

Related Stories

Nanowalls for smartphones

January 6, 2016

Researchers at ETH Zurich have manufactured transparent electrodes for use in touchscreens using a novel nanoprinting process. The new electrodes are some of the most transparent and conductive that have ever been developed.

It's a 3D printer, but not as we know it

January 19, 2016

3D printing techniques have quickly become some of the most widely used tools to rapidly design and build new components. A team of engineers at the University of Bristol has developed a new type of 3D printing that can print ...

The tiniest color picture ever printed

December 16, 2015

Researchers of ETH Zurich and ETH start-up company Scrona achieve a new world record! They have printed a color picture depicting clown fishes around their sea anemone home. This picture is as tiny as the cross-sectional ...

Voltage tester for beating cardiac cells

February 17, 2015

For the first time, scientists have succeeded in recording the current in membrane channels of contracting cardiac cells. To do this, the scientists combined an atomic force microscope with a widely used method for measuring ...

3D mapping of entire buildings with mobile devices

January 13, 2016

Computer scientists working in a group led by ETH Professor Marc Pollefeys have developed a piece of software that makes it very easy to create 3-D models of entire buildings. Running on a new type of tablet computer, the ...

Manipulating cells with a micro-suction cup

August 12, 2010

Researchers at the Institute for Biomedical Engineering have devised a novel method to pick up and relocate individual cells with a microtip without damaging them. In the future this could be used to verify how robust synthetically ...

Recommended for you

Dutch open 'world's first 3D-printed bridge'

October 17, 2017

Dutch officials toasted on Tuesday the opening of what is being called the world's first 3D-printed concrete bridge, which is primarily meant to be used by cyclists.

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.