High-quality perovskite materials developed capable of utilizing long-wavelength sunlight

High-quality perovskite materials developed capable of utilizing long-wavelength sunlight
(a) Fabrication method for a high-quality perovskite material; (b) X-ray diffraction patterns of perovskite materials prepared with different methods. The x-axis represents the intensity of X-ray diffraction while the y-axis denotes the X-ray diffraction angle.

A NIMS research team led by Liyuan Han, director of the Photovoltaic Materials Unit, has developed the world's first method to fabricate high-quality perovskite materials capable of utilizing long-wavelength sunlight of 800 nm or longer. Compared to conventional methods, this method enables the creation of perovskite materials that have a 40-nm wider optical absorption spectrum, a high short-circuit current and high open-circuit voltage. Thus, this method is regarded as a new approach to enhance the efficiency of perovskite solar cells.

The currently available possess optical absorption spectra skewed toward shorter wavelengths. To improve the of these cells, it is vital to develop with optical absorption spectra expanded to include longer wavelengths. Accordingly, several research institutes are developing perovskite materials, (MA)xFA1-xPbI3, which include two types of cations, MA and FA, capable of absorbing light in the longer wavelength region. However, these cations have demerits: their mixing ratio and crystallization temperature are difficult to control. Moreover, due to their tendency to form a mixed crystal phase, there had been no effective method established to fabricate high-purity, single-crystalline perovskite materials.

To resolve these issues, we developed a new method to fabricate a new type of mixed cation-based perovskite material. We first fabricated a pure, single-crystalline precursor material, (FAI)1-xPbI2, under altering temperatures. Then, we performed a reaction between the precursor and MAI (methylammonium iodide). The resulting perovskite material, (MA)xFA1-xPbI3, was a single crystalline phase and had a long fluorescence lifetime. These observations indicated that electrons in the material rarely recombine and they have long lifetimes. The spectrum of the employing this material covered up to 840 nm, which was 40 nm wider than the spectrum of conventional perovskite material (MA3PbI3). As a result, the solar cells we developed obtained 1.4 mA/cm2 higher short-circuit current than the MAPbI3 solar cells that were manufactured under the same conditions.

In future studies, we intend to develop high-quality perovskite solar cells capable of utilizing a broader spectrum of sunlight by adjusting the ratio of the two cations.


Explore further

Research improves efficiency from larger perovskite solar cells

More information: Jian Liu et al. High-Quality Mixed-Organic-Cation Perovskites from a Phase-Pure Non-stoichiometric Intermediate (FAI) -PbI for Solar Cells , Advanced Materials (2015). DOI: 10.1002/adma.201501489
Journal information: Advanced Materials

Citation: High-quality perovskite materials developed capable of utilizing long-wavelength sunlight (2015, November 2) retrieved 19 July 2019 from https://phys.org/news/2015-11-high-quality-perovskite-materials-capable-long-wavelength.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
15 shares

Feedback to editors

User comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more