Effects of 'strong coupling' observed for the first time between light and a micromechanical object

August 6, 2009
Effects of 'strong coupling' observed for the first time between light and a micromechanical object
A small round mirror (middle) is attached to a mechanical bridge such that photons hitting the mirror are reflected and exert a force onto it. Photo: IQOQI

(PhysOrg.com) -- Physicists at the Institute for Quantum Optics and Quantum Information (IQOQI) in Vienna and Innsbruck, Austria, have created an interaction between light and a micromechanical resonator that is strong enough to transfer quantum effects. This is an important step towards quantum physics experiments in the macroscopic domain. They report about their result in the latest issue of the scientific journal Nature.

Quantum physics is full of paradoxes that are in conflict with our everyday experience. Do the laws of quantum physics apply to “everyday” objects visible to the naked eye? This question has been posed by physicists like Erwin Schrödinger already since the beginnings of quantum theory. With today’s nano- and microfabrication capabilities such experiments are within reach. Researchers worldwide have started to investigate possible quantum experiments with mechanically oscillating objects. Such mechanical resonators can vary in size from a few hundred up to several centimeters and would therefore constitute by far the biggest objects on which quantum theory has been tested.

One approach to achieve this enticing goal is to transfer the properties of an elementary quantum system, for example a single electron, atom or photon, onto the macroscopic mechanical object. However, two conditions have to be met: first, the mechanical resonator has to be cooled down to temperatures close to absolute zero (-273, 15°); second, the force between the mechanical resonator and the electron, atom or photon has to be strong enough to overcome the natural decay of the , the so-called decoherence. Thus far none of these conditions has been fulfilled.

Now a group of researchers around Markus Aspelmeyer at the Institute for and Quantum Information (IQOQI) of the Austrian Academy of Sciences (ÖAW) demonstrated the second requirement for observing quantum effects: the “strong coupling” regime between a mechanical object and photons. They report their findings in the latest issue of the scientific journal Nature.

Coupled motion of Light and Mechanics

Aspelmeyer’s group used a mechanical bridge for their experiments: with a width of a twentieth of a millimeter (50 micrometer) and a length of almost a sixth of a millimeter (150 micrometer) it is already visible to the naked eye. A small mirror (50 micrometer diameter) is attached to it such that photons hitting the mirror are reflected and exert a force onto the mechanical bridge. “This is the same radiation-pressure force that we already used in 2006 to demonstrate mechanical laser-cooling”, says Aspelmeyer. “To generate the desired strong coupling we use a well-established method from quantum optics: an optical resonator. Because a single reflection of a photon does not exert a sufficiently large force, we reflect the light back and forth between the small mirror and a second, larger mirror, thereby multiplying the force until the photon escapes through one of the two mirrors due to their non-perfect reflectivity.” If the number photons in the light beam is too small, however, it still takes too long for the force between the light and the mechanics to build up. In this case decoherence dominates and the light field between the two mirrors oscillates essentially independently of the mechanical motion of the bridge. “For large laser intensities, however, the situation changes dramatically: the energy exchange between the light and the mechanics happens faster than the time the photons need to exit the optical resonator and hence the motion of the light and the mechanics becomes coupled.”

An opto-mechanical Pendulum

“The situation is analogous to two pendulums, e.g. two grandfather clocks, that are coupled either via a soft rubber band or via a stiff spring”, explains Markus Aspelmeyer. “In the first case the pendulums swing independent of each other, whereas in the second case the two systems exhibit a completely new, characteristic oscillation pattern due to the ‘strong coupling’”. The experiment of the Austrian scientists is the first to show this effect between a massive mechanical pendulum and an optical light field. Up to now this was only possible in the domain of a few atoms or very small quantum systems. The generated oscillations are neither purely optical nor purely mechanical, but rather a real hybrid opto-mechanical excitation, a feature of particular interest for future quantum experiments.

“We have clearly found the oscillation pattern of the strongly coupled ‘opto-mechanical’ pendulum in the energy spectrum of the leaking out of the optical resonator”, Aspelmeyer adds. After this step the researchers now hope that, with the help of additional cooling like the already successfully implemented mechanical laser-cooling, they can soon observe quantum behavior of mechanical objects: “The next goal is to combine the strong coupling with the cooling of the mechanics”, says Simon Gröblacher, first author of the Nature-study and Ph.D. student in Aspelmeyer’s team. “With this experiment we are on the cusp of being able to test how far into our macroscopic world the laws of quantum physics are valid.”

The research results are the outcome of a fruitful collaboration between experimental and theoretical physicists of the Institute for Quantum Optics and Quantum Information: the theoretician Klemens Hammerer from Innsbruck supported the Vienna team lead by Markus Aspelmeyer with the theory of the experiment and the interpretation of the data. The researchers were supported by the Austrian Science Fund FWF, the European Commission and the Foundational Questions Institute (FQXi).

More information: Observation of strong coupling between a micromechanical and an optical cavity field. S. Gröblacher, K. Hammerer, M. R. Vanner, M. Aspelmeyer. Nature 460, 724-727 (6 August 2009); http://dx.doi.org/10.1038/nature08171

Provided by University of Vienna (news : web)

Explore further: Scientists present method for entangling macroscopic objects

Related Stories

Scientists present method for entangling macroscopic objects

October 24, 2006

Building upon recent studies on optomechanical entanglement with lasers and mirrors, a group of scientists has developed a theoretical model using entanglement swapping in order to entangle two micromechanical oscillators. ...

Atoms Under Control

October 11, 2005

Max Planck researchers lay the foundations for a distributed quantum computer with the "quasipermanent" storing of an atom between two mirrors Complex computing operations could be greatly accelerated through massive parallel ...

Yale scientists bring quantum optics to a microchip

September 8, 2004

A report in the journal Nature describes the first experiment in which a single photon is coherently coupled to a single superconducting qubit (quantum bit or "artificial atom"). This represents a new paradigm in which quantum ...

Super-cool work could expose quantum behavior

April 5, 2007

Using a laser-cooling technique that could one day allow scientists to observe quantum behavior in large objects, MIT researchers have cooled a coin-sized object to within one degree of absolute zero.

Mirrors could be a key to quantum computing

August 31, 2007

“We want to push the envelope,” Pierre Meystre tells PhysOrg.com. “We are trying to figure out how big an object can be and still be measured quantum mechanically.”

Recommended for you

Enhancing the quantum sensing capabilities of diamond

November 22, 2017

Researchers have discovered that dense ensembles of quantum spins can be created in diamond with high resolution using an electron microscopes, paving the way for enhanced sensors and resources for quantum technologies.

Study shows how to get sprayed metal coatings to stick

November 21, 2017

When bonding two pieces of metal, either the metals must melt a bit where they meet or some molten metal must be introduced between the pieces. A solid bond then forms when the metal solidifies again. But researchers at MIT ...

Imaging technique unlocks the secrets of 17th century artists

November 21, 2017

The secrets of 17th century artists can now be revealed, thanks to 21st century signal processing. Using modern high-speed scanners and the advanced signal processing techniques, researchers at the Georgia Institute of Technology ...


Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Aug 06, 2009
re.Grandfather Clocks,I remember reading somewhere that a room full of them will eventually end up ticking in unison (provided they are all e.g. 1 sec. escapement of course!).It's something to do with micro-vibrations travelling through the floor-boards,the clocks in near synchrony giving a bigger jolt to the surroundings thus advancing or retarding the ticks of the other clocks by a tiny fraction until they all tick together.
Are we looking for sub-atomic floorboards here?
not rated yet Aug 06, 2009
Very clever experiment!

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.