Layered graphene sheets could solve hydrogen storage issues

Mar 17, 2010
A graphene-oxide framework (GOF) is formed of layers of graphene connected by boron-carboxylic “pillars.” GOFs such as this one are just beginning to be explored as a potential storage medium for hydrogen and other gases. Credit: NIST

Graphene -- carbon formed into sheets a single atom thick -- now appears to be a promising base material for capturing hydrogen, according to recent research* at the National Institute of Standards and Technology and the University of Pennsylvania. The findings suggest stacks of graphene layers could potentially store hydrogen safely for use in fuel cells and other applications.

Graphene has become something of a celebrity material in recent years due to its conductive, thermal and , which could make it useful in a range of sensors and semiconductor devices. The material does not store hydrogen well in its original form, according to a team of scientists studying it at the NIST Center for Neutron Research. But if oxidized graphene sheets are stacked atop one another like the decks of a multilevel parking lot, connected by molecules that both link the layers to one another and maintain space between them, the resulting graphene-oxide framework (GOF) can accumulate hydrogen in greater quantities.

Inspired to create GOFs by the metal-organic frameworks that are also under scrutiny for , the team is just beginning to uncover the new structures' properties. "No one else has ever made GOFs, to the best of our knowledge," says NIST theorist Taner Yildirim. "What we have found so far, though, indicates GOFs can hold at least a hundred times more than ordinary graphene oxide does. The easy synthesis, low cost and non-toxicity of graphene make this material a promising candidate for gas storage applications."

The GOFs can retain 1 percent of their weight in hydrogen at a temperature of 77 degrees Kelvin and ordinary atmospheric pressure—roughly comparable to the 1.2 percent that some well-studied metal-organic frameworks can hold, Yildirim says.

Another of the team's potentially useful discoveries is the unusual relationship that GOFs exhibit between temperature and hydrogen absorption. In most storage materials, the lower the temperature, the more hydrogen uptake normally occurs. However, the team discovered that GOFs behave quite differently. Although a GOF can absorb hydrogen, it does not take in significant amounts at below 50 Kelvin (-223 degrees Celsius). Moreover, it does not release any hydrogen below this "blocking temperature"—suggesting that, with further research, GOFs might be used both to store hydrogen and to release it when it is needed, a fundamental requirement in applications.

Some of the GOFs' capabilities are due to the linking molecules themselves. The molecules the team used are all benzene-boronic acids that interact strongly with hydrogen in their own right. But by keeping several angstroms of space between the layers—akin to the way pillars hold up a ceiling—they also increase the available surface area of each layer, giving it more spots for the to latch on.

According to the team, GOFs will likely perform even better once the team explores their parameters in more detail. "We are going to try to optimize the performance of the GOFs and explore other linking molecules as well," says Jacob Burress, also of NIST. "We want to explore the unusual temperature dependence of absorption kinetics, as well as whether they might be useful for capturing greenhouse gases such as carbon dioxide and toxins like ammonia."

Explore further: Nano filter cleans environmentally hazardous industrial byproducts

More information: * J. Burress, J. Simmons, J. Ford and T.Yildirim. "Gas adsorption properties of graphene-oxide-frameworks and nanoporous benzene-boronic acid polymers." To be presented at the March meeting of the American Physical Society (APS) in Portland, Ore., March 18, 2010. An abstract is available at meetings.aps.org/Meeting/MAR10/Event/122133

Provided by National Institute of Standards and Technology (NIST)

4.7 /5 (23 votes)

Related Stories

Highlight: Nanopatterning of Graphene

Mar 11, 2010

Center for Nanoscale Materials (CNM) at Argonne National Laboratory users from Politecnico di Milano in Italy, working collaboratively with researchers in the Electronic & Magnetic Materials & Devices Group, ...

Hydrogen storage in nanoparticles works

Mar 31, 2008

Dutch chemist Kees Baldé has demonstrated that hydrogen can be efficiently stored in nanoparticles. This allows hydrogen storage to be more easily used in mobile applications. Baldé discovered that 30 nanometre particles ...

Recommended for you

'Mind the gap' between atomically thin materials

Dec 24, 2014

When it comes to engineering single-layer atomic structures, "minding the gap" will help researchers create artificial electronic materials one atomic layer at a time, according to a team of materials scientists. ...

User comments : 7

Adjust slider to filter visible comments by rank

Display comments: newest first

deatopmg
2.3 / 5 (3) Mar 17, 2010
There is a much more efficient way to capture hydrogen with carbon - it's called natural gas, i.e. methane. We've many 100's of years supply. It's abundant, inexpensive to recover, and found almost everywhere.
Glyndwr
1.3 / 5 (3) Mar 17, 2010
why are you stuck in the old industrial finite resources state of mind....its like you want to live your life in scarcity?
NeilFarbstein
1 / 5 (3) Mar 18, 2010
There is a much more efficient way to capture hydrogen with carbon - it's called natural gas, i.e. methane. We've many 100's of years supply. It's abundant, inexpensive to recover, and found almost everywhere.

somebody should find a way to split the carbon off the methane molecule yielding H2 that wont exacerbate
the greenhouse effect.
Tripping
not rated yet Mar 18, 2010
What about this?
http://physicswor...ws/22689
Were they predict exactly?
ZeroDelta
not rated yet Mar 18, 2010
A fellow studen at RPI recently won $30,000 for VERY similar work. Check it: http://news.rpi.e...key=2690
SongDog
not rated yet Mar 18, 2010
Yeah, great. It only needs a lightweight, crashproof 100 atmosphere tank.
ChazzMann
not rated yet Mar 24, 2010
There is a much more efficient way to capture hydrogen with carbon - it's called natural gas, i.e. methane. We've many 100's of years supply. It's abundant, inexpensive to recover, and found almost everywhere.


As far as "much more efficient" we haven't scratched the surface of how we might make hydrogen, so efficiency comparisons are premature.

Burning hydrogen pulls oxygen from the atmosphere, but making it by electrolysis puts it back. Burning methane removes oxygen; it's not replaced.

The products of hydrogen combustion? Energy and water. The products of methane combustion? Energy and poison.

Water or poison. Pick one. Choose wisely, because your grandchildren's grandchildren will inherit the impacts of your decision.

Haliburton and Exxon love your theories; I'm sure they can buy a scientist who will prove them. Besides, grandchildren are overrated.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.