New theory describes ice's slippery behavior

December 8, 2015
Slick ice covers a footpath, reducing friction and making walking more dangerous. Bo Persson, a scientist at the Jülich Research Center in Germany, has developed a new theory to describe ice friction. Credit: Simon A. Eugster via Wikimedia Commons

Winter is coming, promising the usual bouts of frozen precipitation for northern locations. The slickness of snow and ice is a big pain if you're driving, flying or walking, but can be a lot of fun if you strap on a pair of skis.

Bo Persson, a scientist at the Jülich Research Center in Germany, has come up with a new theory that describes how slippery ice gets when a hard material like a ski slides across it. The theory agrees well with experimental data and could help to design better sliding systems, for example the aforementioned skis. It could also contribute to a fundamental understanding of ice friction that could help explain the movement of glaciers and other natural processes.

Persson reports his results in The Journal of Chemical Physics.

Saying that ice is slippery is just another way of saying that it has low friction, but predicting ice friction is no easy task.

Ice by itself is not inherently slippery, but it gets so when a thin layer of water forms on the surface. The water can appear when heat from friction melts the ice, or via a natural solid to liquid phase transition, called premelting, that occurs near the surface even at temperatures well below the bulk freezing temperature of water. (This premelting was first observed more than 150 years ago when the British scientist Michael Faraday touched two ice cubes together and saw that they stuck. He concluded there was a liquid-like layer on the surface of the ice that froze when the two cubes came into contact.)

Complicating the study of ice friction even further is the fact that the contact between the ice and a sliding object occurs at the interface between two solids, which is called a buried interface.

"It is nearly impossible to study directly at the molecular level what happens at the buried interface," Persson said. This is because the solid material blocks the contact area and you cannot scatter particles like ions or electrons from the interface to study it, like you could for a free surface.

Although premelting of the top layer of a free ice surface has been studied extensively both theoretically and experimentally, the extent to which the results apply to the buried between ice and other solid materials is not clear, Persson noted.

There is, however, a wide range of experimental data that shows how temperature and sliding speed affect friction on ice. Persson's main breakthrough was to connect a theoretical description of ice friction to the . He did this by developing an equation that describes ice's frictional shear stress, which is the stress the material experiences in the area of real contact from a force parallel to the surface (such as that caused by a sliding ski).

The equation shows how the shear stress depends on the ice temperature at the surface. The equation suggests that, like the free surface, the buried ice interfaces may also exhibit premelting behavior.

"The most important result is that I have constructed a phenomenological shear stress law which is able to explain ice friction as a function of sliding speed and temperature in a wide velocity and temperature region," Persson said.

The findings contribute to a better understanding of the physical origin of friction on ice, which Persson said is his main interest. Most recently he has extended his exploration to rubber on ice friction, which is important for designing winter tires and shoes. When rubber slides across ice the deformation of the rubber plays an important role in determining the .

Ultimately, the work could help everyone enjoy the winter weather more, whether you want to walk safely across in your shoes or slide with abandon on a sled or a pair of skis.

Explore further: Finnish research improves the reliability of ice friction assessment

More information: "Ice friction: Role of non-uniform frictional heating and ice premelting," by B.N.J. Persson, The Journal of Chemical Physics, Dec. 8, 2015. DOI: 10.1063/1.4936299

Related Stories

Chipping away at the secrets of ice formation

October 21, 2015

Making ice to chill our drinks is easy enough, but surprisingly, the details of that seemingly simple process are still not well understood. Now scientists report in the Journal of the American Chemical Society that they ...

Finnish researchers find explanation for sliding friction

May 29, 2012

Friction is a key phenomenon in applied physics, whose origin has been studied for centuries. Until now, it has been understood that mechanical wear-resistance and fluid lubrication affect friction, but the fundamental origin ...

Recommended for you

Uncovering the secrets of water and ice as materials

December 7, 2016

Water is vital to life on Earth and its importance simply can't be overstated—it's also deeply rooted within our conscience that there's something extremely special about it. Yet, from a scientific point of view, much remains ...

Blocks of ice demonstrate levitated and directed motion

December 7, 2016

Resembling the Leidenfrost effect seen in rapidly boiling water droplets, a disk of ice becomes highly mobile due to a levitating layer of water between it and the smooth surface on which it rests and melts. The otherwise ...

The case for co-decaying dark matter

December 5, 2016

(Phys.org)—There isn't as much dark matter around today as there used to be. According to one of the most popular models of dark matter, the universe contained much more dark matter early on when the temperature was hotter. ...

3 comments

Adjust slider to filter visible comments by rank

Display comments: newest first

indio007
1 / 5 (2) Dec 08, 2015
Best article on physorg ever. We are still trying to figure out why ice is slippery but somehow we know what's in the galactic center.
BONK__RS
not rated yet Dec 08, 2015
Can we have some more context please?
the explanation that the ice skate melts a thin layer of water has (afaik) been disproven because ice is still slippery at way below freezing, where the skate could not possibly bring a layer up to melting, the heat input required would create more drag than we measure.
mreda14
not rated yet Dec 09, 2015
When a hard material like a ski slides across an icy surface, the frictional force is well known to depend on the velocity gradient ( in this case the speed of the ski V) divide by the distant between the ski and the icy surface y. The friction force is = constant (V/y). The constant is called the viscosity. In this case we have water between the ski and the icy surface. The constant is equal to the viscosity ( vis) of water which is known to depend on temperature of water.
vis = Function (T) , where T is temperature.
The friction force = Function (T) (V/y)
A good skier knows how to change the friction force by changing y.
y can change by how hard the skier push on the ski.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.