Team develops ultra sensitive biosensor from molybdenite semiconductor

Sep 04, 2014 by Sonia Fernandez
A concept art of a molybdenum disulfide field-effect transistor based biosensor demonstrated by UCSB researchers with ability to detect ultra-low (femtomolar) concentrations with high sensitivity that is 74-fold higher than that of graphene FET biosensors. Credit: Peter Allen, UCSB

Move over, graphene. An atomically thin, two-dimensional, ultrasensitive semiconductor material for biosensing developed by researchers at UC Santa Barbara promises to push the boundaries of biosensing technology in many fields, from health care to environmental protection to forensic industries.

Based on molybdenum disulfide or molybdenite (MoS2), the biosensor material—used commonly as a dry lubricant—surpasses 's already high sensitivity, offers better scalability and lends itself to high-volume manufacturing. Results of the researchers' study have been published in ACS Nano.

"This invention has established the foundation for a new generation of ultrasensitive and low-cost biosensors that can eventually allow single-molecule detection—the holy grail of diagnostics and bioengineering research," said Samir Mitragotri, co-author and professor of chemical engineering and director of the Center for Bioengineering at UCSB. "Detection and diagnostics are a key area of bioengineering research at UCSB and this study represents an excellent example of UCSB's multifaceted competencies in this exciting field."

The key, according to UCSB professor of electrical and computer engineering Kaustav Banerjee, who led this research, is MoS2's , the characteristic of a material that determines its electrical conductivity.

Semiconductor materials have a small but nonzero band gap and can be switched between conductive and insulated states controllably. The larger the band gap, the better its ability to switch states and to insulate leakage current in an insulated state. MoS2's wide band gap allows current to travel but also prevents leakage and results in more sensitive and accurate readings.

While graphene has attracted wide interest as a biosensor due to its two-dimensional nature that allows excellent electrostatic control of the transistor channel by the gate, and high surface-to-volume ratio, the sensitivity of a graphene field-effect transistor (FET) biosensor is fundamentally restricted by the zero band gap of graphene that results in increased leakage current, leading to reduced sensitivity, explained Banerjee, who is also the director of the Nanoelectronics Research Lab at UCSB.

Graphene has been used, among other things, to design FETs—devices that regulate the flow of electrons through a channel via a vertical electric field directed into the channel by a terminal called a "gate." In digital electronics, these transistors control the flow of electricity throughout an integrated circuit and allow for amplification and switching.

From right to left graduate student Deblina Sarkar, Professor Kaustav Banerjee, and Professor Samir Mitragotri. Credit: Ian Barin, UCSB

In the realm of biosensing, the physical gate is removed, and the current in the channel is modulated by the binding between embedded receptor molecules and the charged target biomolecules to which they are exposed. Graphene has received wide interest in the biosensing field and has been used to line the channel and act as a sensing element whose surface potential (or conductivity) can be modulated by the interaction (known as conjugation) between the receptor and target molecules that results in net accumulation of charges over the gate region.

However, said the research team, despite graphene's excellent characteristics, its performance is limited by its zero band gap. Electrons travel freely across a graphene FET—hence, it cannot be "switched off"—which in this case results in current leakages and higher potential for inaccuracies.

Much research in the graphene community has been devoted to compensating for this deficiency, either by patterning graphene to make nanoribbons or by introducing defects in the graphene layer—or using bilayer graphene stacked in a certain pattern that allows band gap opening upon application of a vertical electric field—for better control and detection of current.

Enter MoS2, a material already making waves in the semiconductor world for the similarities it shares with graphene, including its atomically thin hexagonal structure, and planar nature, as well as what it can do that graphene can't: act like a semiconductor.

"Monolayer or few-layer MoS2 have a key advantage over graphene for designing an FET biosensor: They have a relatively large and uniform band gap (1.2-1.8 eV, depending on the number of layers) that significantly reduces the leakage current and increases the abruptness of the turn-on behavior of the FETs, thereby increasing the sensitivity of the biosensor," said Banerjee.

Additionally, according to Deblina Sarkar, a PhD student in Banerjee's lab and the lead author of the article, two-dimensional MoS2 is relatively simple to manufacture.

"While one-dimensional materials such as carbon nanotubes and nanowires also allow excellent electrostatics and at the same time possess band gap, they are not suitable for low-cost mass production due to their process complexities," she said. "Moreover, the channel length of MoS2 FET biosensor can be scaled down to the dimensions similar to those of small biomolecules such as DNA or small proteins, still maintaining good electrostatics, which can lead to even for detection of single quanta of these biomolecular species," she added.

"In fact, atomically thin MoS2 provides the best of everything: great electrostatics due to their ultra-thin body, scalability (due to large band gap), as well as patternability due to their planar nature that is essential for high-volume manufacturing," said Banerjee.

The MoS2 biosensors demonstrated by the UCSB team have already provided ultrasensitive and specific protein sensing with a sensitivity of 196 even at 100 femtomolar (a billionth of a millionth of a mole) concentrations. This protein concentration is similar to one drop of milk dissolved in a hundred tons of water. An MoS2-based pH sensor achieving sensitivity as high as 713 for a pH change by one unit along with efficient operation over a wide pH range (3-9) is also demonstrated in the same work.

"This transformative technology enables highly specific, low-power, high-throughput physiological sensing that can be multiplexed to detect a number of significant, disease-specific factors in real time," commented Scott Hammond, executive director of UCSB's Translational Medicine Research Laboratories.

Biosensors based on conventional FETs have been gaining momentum as a viable technology for the medical, forensic and security industries since they are cost-effective compared to optical detection procedures. Such biosensors allow for scalability and label-free detection of biomolecules—removing the step and expense of labeling target molecules with florescent dye. "In essence," continued Hammond, "the promise of true evidence-based, personalized medicine is finally becoming reality."

"This demonstration is quite remarkable," said Andras Kis, professor at École Polytechnique Fédérale de Lausanne in Switzerland and a leading scientist in the field of 2D materials and devices. "At present, the scientific community worldwide is actively seeking practical applications of 2D semiconductor materials such as MoS2 nanosheets. Professor Banerjee and his team have identified a breakthrough application of these nanomaterials and provided new impetus for the development of low-power and low-cost ultrasensitive biosensors," continued Kis, who is not connected to the project.

Explore further: New rapid synthesis developed for bilayer graphene and high-performance transistors

More information: ACS Nano, pubs.acs.org/doi/abs/10.1021/nn5009148

add to favorites email to friend print save as pdf

Related Stories

Scientists probe the next generation of 2-D materials

Apr 03, 2014

As the properties and applications of graphene continue to be explored in laboratories all over the world, a growing number of researchers are looking beyond the one-atom-thick layer of carbon for alternative materials that ...

Recommended for you

A nanosized hydrogen generator

16 hours ago

(Phys.org) —Researchers at the US Department of Energy's (DOE) Argonne National Laboratory have created a small scale "hydrogen generator" that uses light and a two-dimensional graphene platform to boost ...

For electronics beyond silicon, a new contender emerges

Sep 16, 2014

Silicon has few serious competitors as the material of choice in the electronics industry. Yet transistors, the switchable valves that control the flow of electrons in a circuit, cannot simply keep shrinking ...

Making quantum dots glow brighter

Sep 16, 2014

Researchers from the University of Alabama in Huntsville and the University of Oklahoma have found a new way to control the properties of quantum dots, those tiny chunks of semiconductor material that glow ...

The future face of molecular electronics

Sep 16, 2014

The emerging field of molecular electronics could take our definition of portable to the next level, enabling the construction of tiny circuits from molecular components. In these highly efficient devices, ...

User comments : 0