Better catalysts for the petrochemical industry

May 28, 2014 by Fabio Bergamin
Better catalysts for the petrochemical industry
Zeolites are among the most widely used catalysts in the petrochemical industry. Pictured left is a representation of the microscopic structure and center the zeolite catalysts in pelleted form. Credit: : iStockphoto / collage

When crude oil is refined to fuels and chemicals, help is at hand—in the form of so-called catalysts. Scientists now provide a reference parameter for the performance of an important class of catalysts for petrochemical production.

Zeolites are among the substances which can accelerate – they are known as catalysts. Usually applied in pellet form, the industrial production of gasoline from without is today inconceivable. The chemical reactions occur on their surface. Fortunately, these are very large for zeolites: the catalysts are interspersed with nano-sized and microscopic channels through which gaseous or liquid reactants penetrate and the products later can leave.

One of the main industrial problems with the use of zeolites is that the reaction side products clog the pores or block the active sites of the . Experts call such hydrocarbon deposits 'coke'. Consequently, the production needs to be interrupted at regular intervals to burn off the debris formed in the catalyst, thereby regenerating the latter. This reduces the efficiency of the process.

It all depends on the inner structure

Researchers are therefore working to make more resistant to such deposits, thereby delaying the need for regeneration and thus, extending the production cycles. Researchers from ETH Zurich headed by Javier Pérez-Ramírez, a professor of catalysis engineering, have now identified the relation between this resistance and the internal structure of a new class of zeolite catalysts combining a complex network of pores of various sizes: "It is not only about the providing the greatest number of pores, as was previously thought", says Sharon Mitchell, researcher in the group of Pérez-Ramírez. "Rather it is crucial that the nano-sized channels are well connected within the zeolite catalysts and has numerous openings to the outside." This facilitates the penetration of the chemical compounds into the catalyst even when some of the pores are blocked.

The researchers came to this realization by preparing catalysts with diverse pore structures in the laboratory. To achieve this they used different synthesis methods and conditions. The catalysts were subsequently studied in collaboration with Paolo Crivelli, researcher at the Department of Physics, with positron annihilation lifetime spectroscopy (PALS). This technique measures how long the positrons reside within the catalyst. The more connected the pores are, and the greater the number of openings, the faster the positrons can escape from the zeolite. In addition, the scientists assessed how quickly coke deposits formed within the various zeolite catalysts in their laboratory.

Not only better, but also cheaper

"Interestingly, the method by which we could make the most resistant zeolites, was also the cheapest", says Pérez-Ramírez. He expects that the results of the study, published in the journal Nature Communications, will animate industry to adopt their zeolite manufacturing process.

Zeolite catalysts are currently used on a large scale in the petroleum industry to produce high-grade propellants, fuels and raw materials for the chemical industry. On the one hand, large hydrocarbon molecules in the crude oil can be broken down into more useful medium-sized molecules. On the other hand, zeolites can also be used to couple very small hydrocarbons – such as ethene and propene – to obtain higher quality products also of medium chain length. "Even as oil is gradually one day replaced by renewable feedstocks, such as biomass, zeolite catalysts will retain their importance," says Pérez-Ramírez. Premium base chemicals could be produced in an efficient manner using zeolite catalysts.

Explore further: Blueprint from the interior of a catalyst

More information: Milina M, Mitchell S, Crivelli P, Cooke D, Pérez-Ramírez J: Mesopore quality determines the lifetime of hierarchically-structured zeolite catalysts. Nature Communications, Advance online publication 27 May 2014, DOI: 10.1038/ncomms4922

Related Stories

Blueprint from the interior of a catalyst

September 22, 2009

Irregularities in industrial catalysts can inhibit the conversion of crude oil, Utrecht University chemists have concluded. They were the first to provide a detailed blueprint of the interior of a commercially used catalyst ...

Zeolite synthesis made easy

December 12, 2011

Zeolites are porous materials with perfectly regular pores and high surface area that can act as molecular sieves. This property has led to important applications including the purification of air or water such as the contaminated ...

Engineers study the inner world of complex catalysts

September 25, 2012

(—Using state-of-the-art visualization techniques, chemical engineers at ETH Zurich explore the complex inner life of porous catalysts. Their work will aid in the development of rational catalyst design, allowing ...

A simpler path to a catalyst

November 6, 2012

Researchers at ETH Zurich developed a new synthesis procedure for a catalyst. This procedure may be used for the large-scale production of, for instance, plastics from renewable resources in an environmentally friendly and ...

Recommended for you

A new form of real gold, almost as light as air

November 25, 2015

Researchers at ETH Zurich have created a new type of foam made of real gold. It is the lightest form ever produced of the precious metal: a thousand times lighter than its conventional form and yet it is nearly impossible ...

New 'self-healing' gel makes electronics more flexible

November 25, 2015

Researchers in the Cockrell School of Engineering at The University of Texas at Austin have developed a first-of-its-kind self-healing gel that repairs and connects electronic circuits, creating opportunities to advance the ...

Getting under the skin of a medieval mystery

November 23, 2015

A simple PVC eraser has helped an international team of scientists led by bioarchaeologists at the University of York to resolve the mystery surrounding the tissue-thin parchment used by medieval scribes to produce the first ...

Atom-sized craters make a catalyst much more active

November 24, 2015

Bombarding and stretching an important industrial catalyst opens up tiny holes on its surface where atoms can attach and react, greatly increasing its activity as a promoter of chemical reactions, according to a study by ...


Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.