Scientists use DNA to assemble a transistor from graphene

Sep 06, 2013
To the right is a honeycomb of graphene atoms. To the left is a double strand of DNA. The white spheres represent copper ions integral to the chemical assembly process. The fire represents the heat that is an essential ingredient in the technique. Credit: Anatoliy Sokolov of the Bao Group

(Phys.org) —Graphene is a sheet of carbon atoms arrayed in a honeycomb pattern, just a single atom thick. It could be a better semiconductor than silicon – if we could fashion it into ribbons 20 to 50 atoms wide. Could DNA help?

DNA is the blueprint for life. Could it also become the template for making a new generation of based not on silicon, but on an experimental material known as ?

That's the theory behind a process that Stanford chemical engineering professor Zhenan Bao reveals in Nature Communications.

Bao and her co-authors, former post-doctoral fellows Anatoliy Sokolov and Fung Ling Yap, hope to solve a problem clouding the future of electronics: consumers expect silicon chips to continue getting smaller, faster and cheaper, but engineers fear that this virtuous cycle could grind to a halt.

Why has to do with how silicon chips work.

Everything starts with the notion of the semiconductor, a type of material that can be induced to either conduct or stop the flow of electricity. Silicon has long been the most popular semiconductor material used to make chips.

The basic working unit on a chip is the transistor. Transistors are tiny gates that switch electricity on or off, creating the zeroes and ones that run software.

To build more powerful chips, designers have done two things at the same time: they've shrunk transistors in size and also swung those gates open and shut faster and faster.

The net result of these actions has been to concentrate more electricity in a diminishing space. So far that has produced small, faster, cheaper chips. But at a certain point, heat and other forms of interference could disrupt the inner workings of .

"We need a material that will let us build smaller transistors that operate faster using less power," Bao said.

Graphene has the physical and electrical properties to become a next-generation – if researchers can figure out how to mass-produce it.

Graphene is a single layer of arranged in a . Visually it resembles chicken wire. Electrically this lattice of carbon atoms is an extremely efficient conductor.

Bao and other researchers believe that ribbons of graphene, laid side-by-side, could create semiconductor circuits. Given the material's tiny dimensions and favorable , graphene nano ribbons could create very fast chips that run on very low power, she said.

"However, as one might imagine, making something that is only one atom thick and 20 to 50 atoms wide is a significant challenge," said co-author Sokolov.

To handle this challenge, the Stanford team came up with the idea of using DNA as an assembly mechanism.

Physically, DNA strands are long and thin, and exist in roughly the same dimensions as the graphene ribbons that researchers wanted to assemble.

Chemically, DNA molecules contain carbon atoms, the material that forms graphene.

The real trick is how Bao and her team put DNA's physical and chemical properties to work.

The researchers started with a tiny platter of silicon to provide a support (substrate) for their experimental transistor. They dipped the silicon platter into a solution of DNA derived from bacteria and used a known technique to comb the DNA strands into relatively straight lines.

Next, the DNA on the platter was exposed to a copper salt solution. The chemical properties of the solution allowed the copper ions to be absorbed into the DNA.

Next the platter was heated and bathed in methane gas, which contains carbon atoms. Once again chemical forces came into play to aid in the assembly process. The heat sparked a chemical reaction that freed some of the carbon atoms in the DNA and methane. These free carbon atoms quickly joined together to form stable honeycombs of graphene.

"The loose carbon atoms stayed close to where they broke free from the DNA strands, and so they formed ribbons that followed the structure of the DNA," Yap said.

So part one of the invention involved using DNA to assemble ribbons of carbon. But the researchers also wanted to show that these carbon ribbons could perform electronic tasks. So they made transistors on the ribbons.

"We demonstrated for the first time that you can use DNA to grow narrow ribbons and then make working ," Sokolov said.

The paper drew praise from UC Berkeley associate professor Ali Javey, an expert in the use of advanced materials and next-generation electronics.

"This technique is very unique and takes advantage of the use of DNA as an effective template for controlled growth of electronic materials," Javey said. "In this regard the project addresses an important research need for the field."

Bao said the assembly process needs a lot of refinement. For instance, not all of the carbon atoms formed honeycombed ribbons a single atom thick. In some places they bunched up in irregular patterns, leading the researchers to label the material graphitic instead of graphene.

Even so, the process, about two years in the making, points toward a strategy for turning this carbon-based material from a curiosity into a serious contender to succeed silicon.

"Our DNA-based fabrication method is highly scalable, offers high resolution and low manufacturing cost," said co-author Yap. "All these advantages make the method very attractive for industrial adoption."

Explore further: A nanosized hydrogen generator

Related Stories

Researchers devise a way to a create graphene transistor

Jul 18, 2012

(Phys.org) -- Researchers in Germany appear to have found a way to create a monolithic (integrated) graphene transistor, using a lithographic process applied to silicon carbide, a breakthrough that could lead ...

Graphene 'onion rings' have delicious potential

Jul 18, 2013

Concentric hexagons of graphene grown in a furnace at Rice University represent the first time anyone has synthesized graphene nanoribbons on metal from the bottom up—atom by atom.

Recommended for you

A nanosized hydrogen generator

Sep 20, 2014

(Phys.org) —Researchers at the US Department of Energy's (DOE) Argonne National Laboratory have created a small scale "hydrogen generator" that uses light and a two-dimensional graphene platform to boost ...

For electronics beyond silicon, a new contender emerges

Sep 16, 2014

Silicon has few serious competitors as the material of choice in the electronics industry. Yet transistors, the switchable valves that control the flow of electrons in a circuit, cannot simply keep shrinking ...

Making quantum dots glow brighter

Sep 16, 2014

Researchers from the University of Alabama in Huntsville and the University of Oklahoma have found a new way to control the properties of quantum dots, those tiny chunks of semiconductor material that glow ...

The future face of molecular electronics

Sep 16, 2014

The emerging field of molecular electronics could take our definition of portable to the next level, enabling the construction of tiny circuits from molecular components. In these highly efficient devices, ...

User comments : 1

Adjust slider to filter visible comments by rank

Display comments: newest first

flashgordon
3 / 5 (2) Sep 06, 2013
This use of dna isn't exactly dna-origami or some of the other recent dna-nanotech advances; but, there's no reason why this making of arbitrary grapheme by means of dna can't be generalized to dna-origami, which could prove interesting for dna-nanomanufacturing to bootstrap to a more robust nanomanufacturing system.