Reality check for DNA nanotechnology: Lowering barriers to DNA-based nanomanufacturing

Dec 13, 2012
This 3-D print shows a DNA-based structure designed to test a critical assumption -- that such objects could be realized, as designed, with subnanometer precision. This object is a relatively large, three-dimensional DNA-based structure, asymmetrical to help determine the orientation, and incorporating distinctive design motifs. Subnanometer-resolution imaging with low-temperature electron microscopy enabled researchers to map the object -- which comprises more than 460,000 atoms -- with subnanometer-scale detail. Credit: Dietz Lab, TU Muenchen

Two major barriers to the advancement of DNA nanotechnology beyond the research lab have been knocked down. This emerging technology employs DNA as a programmable building material for self-assembled, nanometer-scale structures. Many practical applications have been envisioned, and researchers recently demonstrated a synthetic membrane channel made from DNA. Until now, however, design processes were hobbled by a lack of structural feedback. Assembly was slow and often of poor quality. Now researchers led by Prof. Hendrik Dietz of the Technische Universitaet Muenchen (TUM) have removed these obstacles.

One barrier holding the field back was an unproven assumption. Researchers were able to design a wide variety of discrete objects and specify exactly how DNA strands should zip together and fold into the desired shapes. They could show that the resulting closely matched the designs. Still lacking, though, was the validation of the assumed subnanometer-scale precise positional control. This has been confirmed for the first time through analysis of a test object designed specifically for the purpose. A technical breakthrough based on advances in fundamental understanding, this demonstration has provided a crucial for .

In a separate set of experiments, the researchers discovered that the time it takes to make a batch of complex DNA-based objects can be cut from a week to a matter of minutes, and that the yield can be nearly 100%. They showed for the first time that at a constant temperature, hundreds of DNA strands can fold cooperatively to form an object—correctly, as designed—within minutes. Surprisingly, they say, the process is similar to , despite significant chemical and structural differences. "Seeing this combination of rapid folding and high yield," Dietz says, "we have a stronger sense than ever that DNA nanotechnology could lead to a new kind of manufacturing, with a commercial, even industrial future." And there are immediate benefits, he adds: "Now we don't have to wait a week for feedback on an experimental design, and multi-step assembly processes have suddenly become so much more practical."

Atomically precise control

To test the assumption that discrete DNA objects could be assembled as designed with subnanometer precision, TUM biophysicists collaborated with scientists at the MRC Laboratory of Molecular Biology in Cambridge, UK. They produced a relatively large, three-dimensional DNA-based structure, asymmetrical to help determine the orientation, and incorporating distinctive design motifs.

In the background, a 3-D print showing one of 19 designs for DNA nanotechnology objects that were used to study folding and unfolding dynamics; below, a 3-D print showing clear, sharp peaks in the time-resolved folding and unfolding of the object at constant temperature. Recent results show that the time it takes to produce such objects can be cut from days to minutes, with yields near 100 percent. Credit: Dietz Lab, TU Muenchen

Subnanometer-resolution imaging with low-temperature electron microscopy enabled the researchers to map the object—which comprises more than 460,000 atoms—with subnanometer-scale detail. Because the object incorporates, in effect, a whole library of different design elements, it will also serve as a resource for further study. The results, reported in Proceedings of the National Academy of Sciences, not only demonstrate atomically precise assembly, but also show that such structures, formerly thought to be jelly-like and flexible, are rigid enough to be probed by electron microscopy.

Fast processing, near-100% yields

In contrast, DNA objects with 19 different designs – including plate-like, gear-like, and brick-like shapes – were used for a second series of experiments at TUM, reported in the latest issue of Science. Here the researchers' main focus was on the dynamics of DNA folding and unfolding. The usual self-assembly process is often described as a "one-pot reaction": Strands of DNA that will serve as the template, instructions, and for a designed object are placed together at a relatively high temperature where they will remain separate; the temperature is gradually lowered, and somewhere along the line the DNA strands zip together to form the desired structures.

Observing this process in unprecedented detail, the TUM researchers discovered that all of the action takes place within a specific and relatively narrow temperature range, which differs depending on the design of the object. One practical implication is that, once the optimal temperature for a given design has been determined, DNA self-assembly – nanomanufacturing, in essence – could be accomplished through fast processes at constant temperatures. Following up on this lead, the researchers found that they could "mass-produce" objects made from hundreds of within minutes instead of days, with almost no defective objects or by-products in the resulting batch.

"Besides telling us that complex DNA objects are manufacturable," Dietz says, "these results suggest something we hardly dared to imagine before – that it might be possible to assemble DNA nanodevices in a cell culture or even within a living cell."

From the viewpoint of fundamental biology, the most intriguing result of these experiments may be the discovery that DNA folding resembles protein folding more closely than anticipated. Chemically and structurally, the two families of biomolecules are quite different. But the researchers observed clearly defined "cooperative" steps in the folding of complex DNA objects, no different in principle from mechanisms at work in protein folding. They speculate that further experiments with self-assembly of designed objects could help to unravel the mysteries of protein folding, which is more complex and less accessible to direct study.

Explore further: Research reveals how our bodies keep unwelcome visitors out of cell nuclei

More information: Xiao-chen Bai, Thomas G. Martin, Sjors H. W. Scheres, Hendrik Dietz. Cryo-EM structure of a 3D DNA-origami object. Proceedings of the National Academy of Sciences of the USA, Dec. 4, 2012, 109 (49) 20012-20017; on-line in PNAS Early Edition, Nov. 19, 2012. DOI: 10.1073/pnas.1215713109

Jean-Philippe J. Sobczak, Thomas G. Martin, Thomas Gerling, Hendrik Dietz. Rapid folding of DNA into nanoscale shapes at constant temperature. Science, vol. 338, issue 6113, pp. 1458-1461. DOI: 10.1126/science.1229919

See also: Martin Langecker, Vera Arnaut, Thomas G. Martin, Jonathan List, Stephan Renner, Michael Mayer, Hendrik Dietz, and Friedrich C. Simmel. Synthetic lipid membrane channels formed by designed DNA nanostructures. Science, vol. 338, issue 6109, pp. 932-936. DOI: 10.1126/science.1225624

Related Stories

Nanoscale origami from DNA

Aug 06, 2009

Scientists at the Technische Universitaet Muenchen (TUM) and Harvard University have thrown the lid off a new toolbox for building nanoscale structures out of DNA, with complex twisting and curving shapes. ...

DNA constraints control structure of attached macromolecules

Jun 28, 2005

A new method for manipulating macromolecules has been developed by researchers at the University of Illinois at Urbana-Champaign. The technique uses double-stranded DNA to direct the behavior of other molecules. In previous ...

The promise of nanomanufacturing using DNA origami

Mar 07, 2012

(PhysOrg.com) -- In recent years, scientists have begun to harness DNA’s powerful molecular machinery to build artificial structures at the nanoscale using the natural ability of pairs of DNA molecules ...

Recommended for you

Protons fuel graphene prospects

Nov 26, 2014

Graphene, impermeable to all gases and liquids, can easily allow protons to pass through it, University of Manchester researchers have found.

User comments : 1

Adjust slider to filter visible comments by rank

Display comments: newest first

flashgordon
not rated yet Dec 13, 2012
Recently, it was reported that dna nanomanufacturing can go from weeks to days and hours by using short strands instead of one long dna strand(this was reported months ago, but an update was posted I think just last week or maybe the week before).

This article is showing that the long strand method is not to be counted out! In fact, they've shortened the product cycle to minutes! How? By means of information monitoring feedback using an electron microscope(this is not your daddy's electron microscope!).

The second major point here is that fine tuning the thermodyanmics; and, they found that paying attention to the details of the thermodynamics, we can make dna-nanomanufacturing much more practical(not your daddy's electron microscope).

It would be interesting to see what they can do with the recent short strand dna-nanotech, the rna-nanotech as well.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.