This article has been reviewed according to Science X's editorial process and policies. Editors have highlighted the following attributes while ensuring the content's credibility:


peer-reviewed publication

trusted source


Artificial reef designed by engineers could protect marine life, reduce storm damage

Artificial reef designed by MIT engineers could protect marine life, reduce storm damage
An MIT team is hoping to fortify coastlines with “architected” reefs — sustainable, offshore structures that are engineered to mimic the wave-buffering effects of natural reefs while also providing pockets for fish and other marine life to live. Credit: Massachusetts Institute of Technology

The beautiful, gnarled, nooked-and-crannied reefs that surround tropical islands serve as a marine refuge and natural buffer against stormy seas. But as the effects of climate change bleach and break down coral reefs around the world, and extreme weather events become more common, coastal communities are left increasingly vulnerable to frequent flooding and erosion.

An MIT team is now hoping to fortify coastlines with "architected" reefs—sustainable, engineered to mimic the wave-buffering effects of natural reefs while also providing pockets for fish and other marine life. The study is published in the journal PNAS Nexus.

The team's reef design centers on a cylindrical structure surrounded by four rudder-like slats. The engineers found that when this structure stands up against a wave, it efficiently breaks the wave into turbulent jets that ultimately dissipate most of the wave's total energy. The team has calculated that the new design could reduce as much wave energy as existing artificial reefs, using 10 times less material.

The researchers plan to fabricate each cylindrical structure from sustainable cement, which they would mold in a pattern of "voxels" that could be automatically assembled, and would provide pockets for fish to explore and other marine life to settle in.

The cylinders could be connected to form a long, semipermeable wall, which the engineers could erect along a coastline, about half a mile from shore. Based on the team's initial experiments with lab-scale prototypes, the architected reef could reduce the energy of incoming waves by more than 95 percent.

"This would be like a long wave-breaker," says Michael Triantafyllou, the Henry L. and Grace Doherty Professor in Ocean Science and Engineering in the Department of Mechanical Engineering. "If waves are 6 meters high coming toward this reef structure, they would be ultimately less than a meter high on the other side. So, this kills the impact of the waves, which could prevent erosion and flooding."

Triantafyllou's MIT co-authors are Edvard Ronglan SM '23; graduate students Alfonso Parra Rubio, Jose del Auila Ferrandis, and Erik Strand; research scientists Patricia Maria Stathatou and Carolina Bastidas; and Professor Neil Gershenfeld, director of the Center for Bits and Atoms; along with Alexis Oliveira Da Silva at the Polytechnic Institute of Paris, Dixia Fan of Westlake University, and Jeffrey Gair Jr. of Scinetics, Inc.

Leveraging turbulence

Some regions have already erected artificial reefs to protect their coastlines from encroaching storms. These structures are typically sunken ships, retired oil and gas platforms, and even assembled configurations of concrete, metal, tires, and stones. However, there's variability in the types of artificial reefs that are currently in place, and no standard for engineering such structures.

What's more, the designs that are deployed tend to have a low wave dissipation per unit volume of material used. That is, it takes a huge amount of material to break enough wave energy to adequately protect coastal communities.

The MIT team instead looked for ways to engineer an artificial reef that would efficiently dissipate wave energy with less material, while also providing a refuge for fish living along any vulnerable coast.

"Remember, natural are only found in ," says Triantafyllou, who is director of the MIT Sea Grant. "We cannot have these reefs, for instance, in Massachusetts. But architected reefs don't depend on temperature, so they can be placed in any water, to protect more coastal areas."

MIT researchers test the wave-breaking performance of two artificial reef structures in the MIT Towing Tank. Credit: Edvard Ronglan et al

The new effort is the result of a collaboration between researchers in MIT Sea Grant, who developed the reef structure's hydrodynamic design, and researchers at the Center for Bits and Atoms (CBA), who worked to make the structure modular and easy to fabricate on location.

The team's architected reef design grew out of two seemingly unrelated problems. CBA researchers were developing ultralight cellular structures for the , while Sea Grant researchers were assessing the performance of blowout preventers in offshore oil structures—cylindrical valves that are used to seal off oil and gas wells and prevent them from leaking.

The team's tests showed that the structure's cylindrical arrangement generated a high amount of drag. In other words, the structure appeared to be especially efficient in dissipating high-force flows of oil and gas. They wondered: Could the same arrangement dissipate another type of flow, in ocean waves?

The researchers began to play with the general structure in simulations of water flow, tweaking its dimensions and adding certain elements to see whether and how waves changed as they crashed against each simulated design.

This iterative process ultimately landed on an optimized geometry: a vertical cylinder flanked by four long slats, each attached to the cylinder in a way that leaves space for water to flow through the resulting structure. They found this setup essentially breaks up any incoming wave energy, causing parts of the wave-induced flow to spiral to the sides rather than crashing ahead.

"We're leveraging this turbulence and these powerful jets to ultimately dissipate wave energy," Ferrandis says.

Standing up to storms

Once the researchers identified an optimal wave-dissipating structure, they fabricated a laboratory-scale version of an architected reef made from a series of the cylindrical structures, which they 3D-printed from plastic. Each test cylinder measured about 1 foot wide and 4 feet tall.

They assembled a number of cylinders, each spaced about a foot apart, to form a fence-like structure, which they then lowered into a wave tank at MIT. They then generated waves of various heights and measured them before and after passing through the architected reef.

"We saw the waves reduce substantially, as the reef destroyed their energy," Triantafyllou says.

The team has also looked into making the structures more porous, and friendly to fish. They found that, rather than making each structure from a solid slab of plastic, they could use a more affordable and sustainable type of cement.

"We've worked with biologists to test the cement we intend to use, and it's benign to fish, and ready to go," he adds.

They identified an ideal pattern of "voxels," or microstructures, that cement could be molded into, in order to fabricate the reefs while creating pockets in which fish could live. This voxel geometry resembles individual egg cartons, stacked end to end, and appears to not affect the structure's overall wave-dissipating power.

"These voxels still maintain a big drag while allowing fish to move inside," Ferrandis says.

The team is currently fabricating cement voxel structures and assembling them into a lab-scale architected reef, which they will test under various wave conditions. They envision that the voxel design could be modular, and scalable to any desired size, and easy to transport and install in various offshore locations.

"Now we're simulating actual sea patterns, and testing how these models will perform when we eventually have to deploy them," says Anjali Sinha, a graduate student at MIT who recently joined the group.

Going forward, the team hopes to work with beach towns in Massachusetts to test the structures on a pilot scale.

"These test structures would not be small," Triantafyllou emphasizes. "They would be about a mile long, and about 5 meters tall, and would cost something like 6 million dollars per mile. So it's not cheap. But it could prevent billions of dollars in storm damage. And with climate change, protecting the coasts will become a big issue."

More information: Edvard Ronglan et al, Architected materials for artificial reefs to increase storm energy dissipation, PNAS Nexus (2024). DOI: 10.1093/pnasnexus/pgae101

Journal information: PNAS Nexus

This story is republished courtesy of MIT News (, a popular site that covers news about MIT research, innovation and teaching.

Citation: Artificial reef designed by engineers could protect marine life, reduce storm damage (2024, March 26) retrieved 21 July 2024 from
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Coral reefs protect coasts from severe storms


Feedback to editors