This article has been reviewed according to Science X's editorial process and policies. Editors have highlighted the following attributes while ensuring the content's credibility:

fact-checked

peer-reviewed publication

trusted source

proofread

Scientists find a better way to capture carbon from industrial emissions

Oregon State scientists find a better way to capture carbon from industrial emissions
Researchers in the Oregon State University College of Science have demonstrated the potential of an inexpensive nanomaterial to scrub carbon dioxide from industrial emissions. Image provided by Kyriakos Stylianou, OSU College of Science. Credit: Researchers in the Oregon State University College of Science have demonstrated the potential of an inexpensive nanomaterial to scrub carbon dioxide from industrial emissions. Image provided by Kyriakos Stylianou, OSU College of Science.

Researchers in the Oregon State University College of Science have demonstrated the potential of an inexpensive nanomaterial to scrub carbon dioxide from industrial emissions.

The findings, published in Cell Reports Physical Science, are important because improved carbon capture methods are a key to addressing , said OSU's Kyriakos Stylianou, who led the study.

Carbon , a , results from burning and is one of the primary causes of a warming climate.

Facilities that filter carbon from the air are beginning to spring up around the globe—the world's largest opened in 2021 in Iceland—but they're not ready to make a large dent in the worldwide emissions problem, Stylianou notes. In a year, the Iceland plant can draw out a carbon dioxide amount equivalent to the annual emissions of about 800 cars.

However, technologies for mitigating carbon dioxide at the point of entry into the atmosphere, such as a factory, are comparatively well developed. One of those technologies involves nanomaterials known as metal organic frameworks, or MOFs, that can intercept carbon dioxide molecules through adsorption as make their way through smokestacks.

"The capture of carbon dioxide is critical for meeting net-zero emission targets," said Stylianou, an assistant professor of chemistry. "MOFs have shown a lot of promise for carbon capture because of their porosity and their structural versatility, but synthesizing them often means using reagents that are costly both economically and environmentally, such as heavy metal salts and toxic solvents."

In addition, dealing with the water portion of smokestack gases greatly complicates removing the carbon dioxide, he said. Many MOFs that have shown carbon capture potential lost their effectiveness in humid conditions. Flue gases can be dried, Stylianou said, but that adds significant expense to thecarbon dioxide removal process, enough to make it nonviable for industrial applications.

"So we sought to come up with a MOF to address the various limitations of the materials currently used in carbon capture: high cost, poor selectivity for carbon dioxide, low stability in , and low CO2 uptake capacities," he said.

MOFs are crystalline, porous materials made up of positively charged metal ions surrounded by organic "linker" molecules known as ligands. The make nodes that bind the linkers' arms to form a repeating structure that looks something like a cage; the structure has nanosized pores that adsorb gases, similar to a sponge.

MOFs can be designed with a variety of components, which determine the MOF's properties, and there are millions of possible MOFs, Stylianou said. Almost 100,000 of them have been synthesized by chemistry researchers, and the properties of another half-million have been predicted.

"In this study we introduce a MOF composed of aluminum and a readily available ligand, benzene-1,2,4,5-tetracarboxylic acid," Stylianou said. "The synthesis of the MOF happens in water and only takes a couple of hours. And the MOF has pores with a size comparable to that of CO2 molecules, meaning there's a confined space for incarcerating the dioxide."

The MOF works well in damp conditions and also prefers to nitrogen, which is important because nitrogen oxides are an ingredient in flue gasses. Without that selectivity, the MOF would potentially be binding to the wrong molecules.

"This MOF is an outstanding candidate for wet post-combustion applications," Stylianou said. "It's cost effective with exceptional separation performance and can be regenerated and reused at least three times with comparable uptake capacities."

Scientists from Columbia University, the Pacific Northwest National Laboratory and Chemspeed Technologies AG of Switzerland also took part in this research, as did Oregon State chemists Ryan Loughran, Tara Hurley and Andrzej Gładysiak.

More information: Ryan P. Loughran et al, CO2 capture from wet flue gas using a water-stable and cost-effective metal-organic framework, Cell Reports Physical Science (2023). DOI: 10.1016/j.xcrp.2023.101470

Journal information: Cell Reports Physical Science

Citation: Scientists find a better way to capture carbon from industrial emissions (2023, July 6) retrieved 16 April 2024 from https://phys.org/news/2023-07-scientists-capture-carbon-industrial-emissions.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

New research finds way to scrub carbon dioxide from factory emissions, make useful products

116 shares

Feedback to editors