This article has been reviewed according to Science X's editorial process and policies. Editors have highlighted the following attributes while ensuring the content's credibility:

fact-checked

trusted source

proofread

Chemically bonded multi-nanolayer aerogel for thermal superinsulation

Chemically bonded multi-nanolayer aerogel for thermal superinsulation
(a) Illustration of the fabrication process of a-BNGA. (b) SEM image of a-BNGA framework. (c,d) TEM image of a-BNGA cell wall cross section with multi-nanolayer structure.(e) Optical photograph of a-BNGA with spacesuit and lunar base shapes. Credit: Science China Press

Thermal superinsulation materials with low thermal conductivities are essential for thermal insulation and protection under extreme conditions. These materials are particularly required in fields including deep-space exploration, aerospace, mechanical, and thermal power engineering, which need exceptional insulation and reliability.

Inorganic aerogels have exhibited many superior characteristics such as ultralight weight, high deformability, excellent fire/ and low thermal conductivity, demonstrating promise in thermal insulators.

However, inorganic aerogels are still plagued by a tradeoff between their mechanical and thermal properties, presenting a key roadblock to further explore their functionality. Although enhancement in mechanical or thermal properties has been well studied in inorganic aerogels, there is still a lack of efficient synergistic strategies to solve this typical tradeoff.

In a new research article published in the National Science Review, researchers at Harbin Institute of Technology and Southeast University present a chemically bonded multi-nanolayer design and synthesis of a graphene/amorphous boron nitride aerogel (a-BNGA) to simultaneously enhance the mechanical and thermal properties.

In contrast to previous works, the graphene framework is uniformly deposited by a-BN nanolayer on both sides, forming a chemically bonded multi-nanolayer structure. It was found that the chemically bonded interfaces tightly anchor the uniform a-BN jacket onto the graphene skeleton, which acts via a tendon-like mechanism, ensuring a synergistic deformation and load transfer in the framework.

Chemically bonded multi-nanolayer aerogel for thermal superinsulation
(a) A schematic of the lunar base. Aerogel serves as an outer thermal shield for a lunar base. (b) Optical photograph of the experimental set-up of lunar base model in high-vacuum. (c) Schematic of temperature field simulation and hot boundary in heating process. (d) Schematic of temperature field simulation and cold boundary in cooling process. (e) Transient temperature curves of the boundaries (upper) and interior environment (lower). Credit: Science China Press

In addition, a-BN nanolayer can increase the elastic stiffness of cell walls endows a desirable bending moment distribution, realizing a coupled toughening effect to enhance the structural resilience.

The resulting a-BNGA features an ultralow density with ultrahigh flexibility (elastic compressive strain up to 99%, elastic bending strain up to 90%) and exceptional thermal stability (almost no strength degradation after sharp thermal shocks). The researchers demonstrate the flexible deformability by the fold and unfold process of an aerogel flower in human hand.

Notably, the a-BN nanolayer in aerogel, which exceeds 20% in volume, is mechanically crucial but thermally inactive-an ideal state for materials. The solid conduction and radiation contributions, which together make up the apparent thermal conductivity of material in vacuum. Benefiting from the scarcity of effective conduction paths by low density and the additional phonon scattering by interface, solid conduction can be effectively inhibited.

Furthermore, graphene can be used as an infrared absorber to reduce the radiative thermal transport. The researchers experimentally proved this aerogel with record- in vacuum among freestanding solid materials to date. In addition, they designed a lunar base model working in high-vacuum to showcase the thermal superinsulation capabilities of aerogel in extraterrestrial exploration application.

"We achieve a combination of exceptional mechanical and thermal properties of inorganic and defining a robust material system for thermal superinsulation at , such as lunar and Mars bases, satellites and spacecrafts," Prof. Xiang Xu said, "This kind of material and may also provide opportunities for inorganic aerogels to endow other unique functions."

More information: Hongxuan Yu et al, Chemically bonded multi-nanolayer inorganic aerogel with a record-low thermal conductivity in a vacuum, National Science Review (2023). DOI: 10.1093/nsr/nwad129

Citation: Chemically bonded multi-nanolayer aerogel for thermal superinsulation (2023, July 19) retrieved 28 May 2024 from https://phys.org/news/2023-07-chemically-bonded-multi-nanolayer-aerogel-thermal.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Scientists develop all-natural, wood-inspired aerogel

1 shares

Feedback to editors