Researchers use SLAC instrument to learn what happens to silicon under intense pressure

March 14, 2019 by Ali Sundermier, SLAC National Accelerator Laboratory
After blasting silicon with intense laser pulses at SLAC’s Linac Coherent Light Source, researchers saw an unexpected shock wave appear in the material before its structure was irreversibly changed. Credit: Gregory Stewart/SLAC National Accelerator Laboratory

Elasticity, the ability of an object to bounce back to its original shape, is a universal property in solid materials. But when pushed too far, materials change in unrecoverable ways: Rubber bands snap in half, metal frames bend or melt and phone screens shatter.

For instance, when , an element abundant in the Earth's crust, is subjected to and pressure, an initial "elastic" shock wave travels through the material, leaving it unchanged, followed by an "inelastic" shock wave that irreversibly transforms the structure of the material.

Using a new technique, researchers were able to directly watch and image this process. To their surprise, they discovered that it included an extra step that had not been seen before: After the first elastic shock wave traveled through the silicon, a second elastic wave appeared before the final inelastic wave changed the material's properties.

Their results were published in Science Advances last week.

"We discovered that this transformation is more nuanced than previously thought," says Shaughnessy Brennan Brown, a postdoctoral candidate at Stanford University and graduate research associate at the Department of Energy's SLAC National Accelerator Laboratory who led the analysis. "We illuminated an entirely new feature potentially observable in other ."

Seeing through a new lens

In addition to contributing to a deeper understanding of silicon, a material that is important in fields like engineering, geophysics and , this new technique lights the path for solving problems in other fields.

"The platform Shaughnessy developed is also useful in areas like meteoritics," says co-author Arianna Gleason-Holbrook, a staff scientist at the Stanford Institute for Materials and Energy Sciences (SIMES) at SLAC. "Let's say a large metal impactor, like the remnant core of some planet, hits a terrestrial planet. This technique will allow us to zoom in and spatially walk through the history of that type of shock to answer a number of important questions, like how life gets delivered to a new planet or what happens during asteroid collisions."

"It's almost like you've had blurry vision for a while," she said, "but then you put on glasses and the world opens up. What we've done in this paper is provide a new lens on materials properties."

Catching the wave

At SLAC, researchers can see what's happening deep in the belly of samples by hitting them with ultrafast X-ray laser pulses from the Linac Coherent Light Source (LCLS), and then using the patterns formed by the scattered X-rays to reconstruct images.

At the Matter in Extreme Conditions (MEC) instrument, researchers blast the samples with intense pulses from a second high-power laser before hitting them with X-rays to watch how materials respond to extreme heat and pressure. In many experiments, researchers position these two lasers nearly parallel to each other. This helps them understand how the material is changing over time but doesn't give them a clear picture of what these structural transformations actually look like.

A key feature of the technique used in this paper is that the researchers took advantage of a new laser placement that had been used in previous papers, shooting the pulses from the second laser perpendicular to the X-ray pulses from LCLS. This different vantage point allowed them to watch elusive structural changes to the silicon as they occurred, which is how they imaged the second wave moving through the silicon.

Wide range of scales

This new experimental setup also allowed the researchers to magnify what they saw, boosting the resolution of their images and allowing them to get a holistic picture of what was happening to the silicon on a wide range of scales, from the microscopic to the macroscopic.

To follow up, the researchers will repeat the experiment in much more and apply it to a much broader class of materials to find out if they still see this extra step, which will lead to a better understanding of how materials transform.

"We've been attempting to understand fundamental processes of material transformation without always seeing the whole picture," Brennan Brown says. "Many scientists use clever techniques to approach the problem from different angles. The beauty of this new platform is its clarity, directness and scope."

Explore further: Scientists use lasers to simulate shock effects of meteorite impact on silica

More information: S. Brennan Brown et al. Direct imaging of ultrafast lattice dynamics, Science Advances (2019). DOI: 10.1126/sciadv.aau8044

Related Stories

Scientists film shock waves in diamond

June 18, 2015

Researchers have used ultra-short pulses of X-rays to film shock waves in diamonds. The study headed by DESY scientists opens up new possibilities for studying the properties of materials. Thanks to the extremely bright and ...

Recommended for you

ATLAS experiment observes light scattering off light

March 20, 2019

Light-by-light scattering is a very rare phenomenon in which two photons interact, producing another pair of photons. This process was among the earliest predictions of quantum electrodynamics (QED), the quantum theory of ...

How heavy elements come about in the universe

March 19, 2019

Heavy elements are produced during stellar explosion or on the surfaces of neutron stars through the capture of hydrogen nuclei (protons). This occurs at extremely high temperatures, but at relatively low energies. An international ...

Trembling aspen leaves could save future Mars rovers

March 18, 2019

Researchers at the University of Warwick have been inspired by the unique movement of trembling aspen leaves, to devise an energy harvesting mechanism that could power weather sensors in hostile environments and could even ...

Quantum sensing method measures minuscule magnetic fields

March 15, 2019

A new way of measuring atomic-scale magnetic fields with great precision, not only up and down but sideways as well, has been developed by researchers at MIT. The new tool could be useful in applications as diverse as mapping ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.