360 degrees, 180 seconds: New technique speeds analysis of crop traits

June 18, 2018 by Scott Schrage, University of Nebraska-Lincoln
Nebraska researchers have devised a more efficient and accurate way to scan the structural properties of plants. Credit: Yufeng Ge | Suresh Thapa | Scott Schrage

A potted nine-leaf corn plant sits on a Frisbee-sized plate. The tandem begins rotating like the centerpiece atop a giant music box, three degrees per second, and after two minutes the plant has pirouetted to its original position.

Another minute passes, and on a nearby screen appears a digital 3-D image in the palette of Dr. Seuss: magenta and teal and yellow, each leaf rendered in a different hue but nearly identical to its actual counterpart in shape, size and angle.

That rendering and its associated data come courtesy of LiDAR, a technology that fires pulsed laser light at a surface and measures the time it takes for those pulses to reflect back—the greater the delay, the greater the distance. By scanning a plant throughout its rotation, this 360-degree LiDAR technique can collect millions of 3-D coordinates that a sophisticated algorithm then clusters and digitally molds into the components of the plant: leaves, stalks, ears.

The University of Nebraska-Lincoln's Yufeng Ge, Suresh Thapa and their colleagues have devised the approach as a way to automatically and efficiently gather data about a plant's phenotype: the physical traits that emerge from its genetic code. The faster and more accurately phenotypic data can be collected, the more easily researchers can compare crops that have been bred or genetically engineered for specific traits—ideally those that help produce more food.

Accelerating that effort is especially important, the researchers said, to meet the food demands of a global population expected to grow from about 7.5 billion people today to nearly 10 billion in 2050.

"We can already do DNA sequencing and genomic research very rapidly," said Ge, assistant professor of biological systems engineering. "To use that information more effectively, you have to pair it with phenotyping data. That will allow you to go back and investigate the genetic information more closely. But that is now (reaching) a bottleneck, because we can't do that as fast as we want at a low cost."

At three minutes per plant, the team's set-up operates substantially faster than most other phenotyping techniques, Ge said. But speed matters little without accuracy, so the team also used the system to estimate four traits of corn and sorghum . The first two traits—the surface area of individual leaves and all leaves on a plant—help determine how much energy-producing photosynthesis the plant can perform. The other two—the angle at which leaves protrude from a stalk and how much those angles vary within a plant—influence both photosynthesis and how densely a crop can be planted in a field.

Comparing the system's estimates with careful measurements of the corn and sorghum plants revealed promising results: 91 percent agreement on the of individual leaves and 95 percent on total leaf area. The accuracy of angular estimates was generally lower but still ranged from 72 percent to 90 percent, depending on the variable and type of plant.

Camera shy

To date, the most common form of 3-D phenotyping has relied on stereo-vision: two cameras that simultaneously capture images of a plant and merge their perspectives into an approximation of 3-D by identifying the same points from both images.

Though imaging has revolutionized phenotyping in many ways, it does have shortcomings. The shortest, Ge said, is an inevitable loss of spatial information during the translation from 3-D to 2-D, especially when one part of a plant blocks a camera's view of another part.

"It has been particularly challenging for traits like leaf area and leaf angle, because the image does not preserve those traits very well," Ge said.

The 360-degree LiDAR approach contends with fewer of those issues, the researchers said, and demands fewer computational resources when constructing a 3-D image from its data.

"LiDAR is advantageous in terms of the throughput and speed and in terms of accuracy and resolution," said Thapa, in biological systems engineering. "And it's becoming more economical (than before)."

Going forward, the team wants to introduce lasers of different colors to its LiDAR set-up. The way a plant reflects those additional lasers will help indicate how it uptakes water and nitrogen—the essentials of plant growth—and produces the chlorophyll necessary for photosynthesis.

"If we can tackle those three (variables) on the chemical side and these other four (variables) on the morphological side, and then combine them, we'll have seven properties that we can measure simultaneously," Ge said. "Then I will be really happy."

The researchers reported their new approach in the journal Sensors. Ge and Thapa authored the study with Hongfeng Yu, associate professor of computer science and engineering; Feiyu Zhu, doctoral student in computer science and engineering; and Harkamal Walia, associate professor of agronomy and horticulture.

Explore further: From Alaska to Amazonia—first global maps of traits that drive vegetation growth

More information: Suresh Thapa et al. A Novel LiDAR-Based Instrument for High-Throughput, 3D Measurement of Morphological Traits in Maize and Sorghum, Sensors (2018). DOI: 10.3390/s18041187

Related Stories

Recommended for you

Nanoscale Lamb wave-driven motors in nonliquid environments

March 19, 2019

Light driven movement is challenging in nonliquid environments as micro-sized objects can experience strong dry adhesion to contact surfaces and resist movement. In a recent study, Jinsheng Lu and co-workers at the College ...

OSIRIS-REx reveals asteroid Bennu has big surprises

March 19, 2019

A NASA spacecraft that will return a sample of a near-Earth asteroid named Bennu to Earth in 2023 made the first-ever close-up observations of particle plumes erupting from an asteroid's surface. Bennu also revealed itself ...

The powerful meteor that no one saw (except satellites)

March 19, 2019

At precisely 11:48 am on December 18, 2018, a large space rock heading straight for Earth at a speed of 19 miles per second exploded into a vast ball of fire as it entered the atmosphere, 15.9 miles above the Bering Sea.

Revealing the rules behind virus scaffold construction

March 19, 2019

A team of researchers including Northwestern Engineering faculty has expanded the understanding of how virus shells self-assemble, an important step toward developing techniques that use viruses as vehicles to deliver targeted ...

Levitating objects with light

March 19, 2019

Researchers at Caltech have designed a way to levitate and propel objects using only light, by creating specific nanoscale patterning on the objects' surfaces.

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.