X-rays from tabletop lasers allows scientists to peer through the 'water window'

May 11, 2018, Imperial College London
Generation and characterization of water window harmonics. Pulses of 1.8-mm wavelength, 12-fs duration, and 550-mJ energy are focused into an 820-mm outer diameter needle filled with multiple-atmosphere pressures of gas, with a spot size of 40-mm FWHM (A) and good spatiotemporal quality (B). Differential pumping keeps the chamber pressure below 10−2 mbar. The harmonics pass through optional diagnostic optics: a 45° annular mirror (C) for reflecting the IR pulses for analysis or a movable slit (D) for selecting a slice of the harmonics for spatial phase measurement. The harmonics then pass through metallic filters and a spectrometer slit before being detected with a flat-field grating and photon-counting x-ray charge-coupled device (CCD) camera. VLS, variable line spacing. Credit: Science Advances (2018). advances.sciencemag.org/content/4/5/eaar3761

Studying the fleeting actions of electrons in organic materials will now be much easier, thanks to a new method for generating fast X-rays.

The technique means advanced measurements of fast reactions will now be possible in physics labs around the world, without having to wait to use expensive and scarce equipment. It could be used, for example, to study and improve light-harvesting technologies like solar panels and water splitters.

When 'soft' X-rays, beyond the range of ultraviolet light, strike an object, they are strongly absorbed by some kinds of atoms and not others. In particular, water is transparent to these X-rays, but carbon absorbs them, making them useful for imaging organic and biological materials.

However, a challenge has been to generate very fast soft X-rays. Creating pulses of X-rays that only last one thousandth of a millionth of a millionth of a second would allow researchers to image the extremely quick motions of electrons, crucial for determining how charge travels and reactions occur.

Fast soft X-rays have been created with large facilities, such as multi-billion dollar costing free-electron lasers, but now a research team from Imperial College London have generated fast and powerful fast soft X-ray pulses using standard laboratory lasers. The method, which can produce bright soft X-ray pulses that last hundreds of attoseconds (quintillionths of a second), is published today in Science Advances.

With the new technique, researchers will be able to watch the movement of electrons on their natural timescale, giving them a dynamic picture of the smallest and fastest reaction steps.

Senior author Professor Jon Marangos, from the Department of Physics at Imperial, said: "The strength of this technique is that it can be used by many physics labs around the world with lasers they already have installed.

"This discovery will allow us to make measurements at extreme timescales for the first time. We are at the frontiers of what we can measure, seeing faster-than-ever processes important for science and technology."

Generating X-rays in a lab requires exciting atoms until they release photons—particles of light. Normally, atoms in a long, dispersed cloud are excited in sequence so that they emit photons in 'phase', meaning they add up and create a stronger X-ray . This is known as phase matching.

But when trying to generate soft X-rays this way, effects in the cloud of atoms strongly defocus the laser, disrupting phase matching.

Instead, the team discovered that they needed a thin, dense cloud of atoms and short laser pulses. With this setup, while the photons could not stay in phase over a long distance, they were still in phase over a shorter distance and for a short time. This led to unexpectedly efficient production of the short soft X-ray pulses.

The team further measured and simulated the exact effects that cause high harmonic generation in this situation, and from this were able to predict the optimum laser conditions for creating a range of X-rays.

Lead researcher Allan Johnson, from the Department of Physics at Imperial, said: "We've managed to look inside what was before the relatively black-box of soft X-ray generation, and use that information to build an X-ray on a table that can compete with football-field spanning facilities. Knowledge is quite literally power in this game."

The team at Imperial plan to use the technique to study organic polymer materials, in particular those that harvest the Sun's rays to produce energy or to split water. These materials are under intense study as they can provide cheaper renewable energy.

However, many currently used materials are unstable or inefficient, due to the action of electrons that are excited by light. Closer study of the fast interactions of these electrons could provide valuable insights into methods for improving solar cells and catalysts.

Explore further: Hard X-ray flash breaks speed record

More information: "High-flux soft x-ray harmonic generation from ionization-shaped few-cycle laser pulses" Science Advances (2018). advances.sciencemag.org/content/4/5/eaar3761

Related Stories

Hard X-ray flash breaks speed record

April 10, 2018

Reactions in solar panels, catalytic converters, and other devices are governed by the quick motion of electrons. To capture the movement of these electrons, scientists use pulses of extremely high energy x-rays. The challenge ...

Magnetic trick triples the power of SLAC's X-ray laser

February 5, 2018

Scientists at the Department of Energy's SLAC National Accelerator Laboratory have discovered a way to triple the amount of power generated by the world's most powerful X-ray laser. The new technique, developed at SLAC's ...

Creating bright X-ray pulses in the laser lab

November 11, 2014

To create X-rays—short wave radiation—scientists at TU Vienna start out with very long wavelengths—infrared laser. Long wavelength laser pulses rip atoms out of metal and accelerate them, which leads to emission of ...

Recommended for you

Gravitational wave detectors to search for dark matter

August 16, 2018

Gravitational wave detectors might be able to detect much more than gravitational waves. According to a new study, they could also potentially detect dark matter, if dark matter is composed of a particular kind of particle ...

1 comment

Adjust slider to filter visible comments by rank

Display comments: newest first

CubicAdjunct747
5 / 5 (1) May 11, 2018
100's of attoseconds, this is pretty amazing! i think the slowed light through the bottle movie would take 20 minutes or longer to watch at 100s of attoseconds.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.