Protonic ceramic fuel cells are highly durable, fuel flexible

May 10, 2018, Colorado School of Mines
Protonic ceramic fuel cells are highly durable, fuel flexible
Chuancheng Duan, the paper's co-lead author, will graduate from Mines this week with a PhD in Material Science. Credit: Colorado School of Mines

Protonic ceramic fuel cells could one day be used to power off-the-grid cabins in remote locations, backup generators during natural disasters and more.

In the first long-term study of its kind, researchers from Colorado School of Mines have shown that the relatively new class of fuel exhibit both the long-term durability and fuel flexibility needed to become a viable commercial alternative to other existing technologies.

In all, researchers tested 11 different fuels – hydrogen, methane, domestic natural gas (with and without hydrogen sulfide), propane, n-butane, i-butane, iso-octane, methanol, ethanol and ammonia – demonstrating excellent performance and exceptional durability across all fuel types over thousands of hours of operation. Their findings, "Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells," were published today by the journal Nature.

"Protonic ceramic fuel cells (PCFCs) are very fuel flexible. We can feed them all sorts of different real-world fuels and make electricity," said Ryan O'Hayre, professor of metallurgical and materials engineering and co-lead author of the paper with Mines Ph.D. candidate Chuancheng Duan. "That's very different from other fuel cells that only work on hydrogen. Some high-temperature solid oxide fuel cells (SOFCs) will also run on other fuels but they're very finicky – if you feed them fuels other than hydrogen, they are susceptible to contamination and degradation, and their performance drops rapidly with time. Our fuel cells didn't face those problems with long-term testing."

"No one can get hydrogen delivered to their door very easily," O'Hayre added. "But you can go down the road to the 7-Eleven and pick up a tank of propane."

Protonic ceramics are a relative newcomer in the fuel cell world, the material having only been discovered in Japan in 1980. It wasn't until the late 1980s and early 1990s, though, that the technology began to gain acceptance, and in just the last eight or so years, researchers have made major inroads in addressing stability issues and how to make the dense membranes necessary to power a device, O'Hayre said.

The performance tests conducted at Mines were 10 times longer in duration than any previous effort, O'Hayre said. For the tests, Duan designed and built a fuel-cell testing system where he could simultaneously test seven cells using different fuels for thousands of hours. The setup required careful monitoring for the better part of two years.

"The longest test was 8,000 hours, which is almost a whole year," Duan said. "The degradation rate of most of the fuel cells was less than 3 percent per 1,000 hours, which meets the requirements of commercial products."

Developing a highly durable that can directly use natural gas and hydrocarbons is critical when it comes to commercialization, Duan said.

Mines researchers are now working with Fuel Cell Energy, a Connecticut-based cell company, to scale up the lab-scale technology and develop a pre-commercial prototype that could deliver the amount of electricity needed to power a RV or remote cabin, with funding from the U.S. Department of Energy's Advanced Research Projects Agency-Energy (ARPA-E).

"Based on our current work and achievements, it is time to collaborate with an industrial partner to make commercial products," Duan said. "In three years, there will be a 500-watt direct-natural gas PCFC stack developed based on our technology. In less than 10 years, there will be a 1-kilowatt PCFC stack that could serve as a house power supply, the backup power supply for offices or mobile base stations."

"This is an excellent example of the fruitful collaborations between Mines and CoorsTek catalyzed in part by their lead support for the new CoorsTek Center for Applied Science and Engineering on campus," O'Hayre said. "David Hook at CoorsTek spearheaded high-temperature XRD studies that helped us better understand the high-temperature behavior of our protonic ceramic membrane."

Explore further: Powerful ceramic fuel cells could enable in-home production of electricity from natural gas

More information: Chuancheng Duan et al. Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells, Nature (2018). DOI: 10.1038/s41586-018-0082-6

Related Stories

New fuel cell technology runs on solid carbon

January 22, 2018

Advancements in a fuel cell technology powered by solid carbon could make electricity generation from resources such as coal and biomass cleaner and more efficient, according to a new paper published by Idaho National Laboratory ...

Recommended for you

Galactic center visualization delivers star power

March 21, 2019

Want to take a trip to the center of the Milky Way? Check out a new immersive, ultra-high-definition visualization. This 360-movie offers an unparalleled opportunity to look around the center of the galaxy, from the vantage ...

Physicists reveal why matter dominates universe

March 21, 2019

Physicists in the College of Arts and Sciences at Syracuse University have confirmed that matter and antimatter decay differently for elementary particles containing charmed quarks.


Adjust slider to filter visible comments by rank

Display comments: newest first

1 / 5 (1) May 10, 2018

What is the cost and availability?
Whydening Gyre
not rated yet May 10, 2018
Isn't this similar to Bloom box?
not rated yet May 12, 2018
what's its energy efficiency?
not rated yet May 14, 2018
The requirements for being a car engine are lower than for stationary energy generator. A typical engine is only expected to last about 5,000 hours in use, whereas 8,000 hours is a bit short of one year in continuous operation - you'd be swapping out your generator stack more often than you change your lightbulbs.

Isn't this similar to Bloom box?

Bloom box is SOFC.

what's its energy efficiency?

The paper mentions 50% and above. That usually means slightly over 50%.

Considering fuel cell efficiency, and electrical system efficiency, this technology still wouldn't pass 2025 CAFE standards for fuel economy if made into a car, which is unfortunate.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.