Microwaved plastic increases lithium-sulfur battery life span

May 9, 2018 by Kayla Wiles, Purdue University
Researchers have discovered that soaking low density plastic in a sulfur-containing solvent, putting it into a microwave and transforming it into a carbon scaffold makes lithium-sulfur batteries last longer and retain elevated capacity. Credit: Purdue University image/Patrick Kim

Purdue engineers have figured out a way to tackle plastic landfills while also improving batteries – by putting ink-free plastic soaked in sulfur-containing solvent into a microwave, and then into batteries as a carbon scaffold.

Lithium-sulfur batteries have been hailed as the next generation of batteries to replace the current variety. Lithium-sulfur batteries are cheaper and more energy-dense than ions, which would be important characteristics in everything from electric vehicles to laptops.

But the knock on to this point is that they don't last as long, being usable for about 100 charging cycles.

Purdue researchers have found a way to increase the life span in a process that has the added bonus of being a convenient way to recycle . Their process, which was recently published in ACS Applied Materials and Interfaces, shows that putting sulfur-soaked plastic in a microwave, including transparent plastic bags, transforms the material into the ideal substance for increasing the life span of the forthcoming batteries to more than 200 charging-discharging cycles.

"No matter how many times you recycle plastic, that plastic stays on the earth," said Vilas Pol, associate professor in Purdue's School of Chemical Engineering. "We've been thinking of ways to get rid of it for a long time, and this is a way to at least add value."

The need to reduce landfills runs parallel to making lithium-sulfur batteries good enough for commercial use.

"Because lithium-sulfur batteries are getting more popular, we want to get a longer life sucked out of them," Pol said.

Low-density polyethylene plastic, which is used for packaging and comprises a big portion of plastic waste, helps address a long-standing issue with lithium-sulfur batteries – a phenomenon called the polysulfide shuttling effect that limits how long a battery can last between charges.

Lithium-sulfur batteries, as their name suggests, have a lithium and a sulfur. When a current is applied, lithium ions migrate to the sulfur and a chemical reaction takes place to produce . The byproduct of this reaction, polysulfide, tend to cross back over to the lithium side and prevent the migration of lithium ions to sulfur. This decreases the charge capacity of a battery as well as .

"The easiest way to block polysulfide is to place a physical barrier between lithium and sulfur," said Patrick Kim, a Purdue postdoc research associate in chemical engineering.

Previous studies had attempted making this barrier out of biomass, such as banana peels and pistachio shells, because the pores in biomass-derived had the potential to catch polysulfide.

"Every material has its own benefit, but biomass is good to keep and can be used for other purposes," Pol said. "Waste plastic is really valueless and burdensome material."

Instead, researchers thought of how plastic might be incorporated into a carbon scaffold to suppress polysulfide shuttling in a battery. Past research had shown that low-density polyethylene plastic yields carbon when combined with sulfonated groups.

The researchers soaked a plastic bag into sulfur-containing solvent and put it in a microwave to cheaply provide the quick boost in temperature needed for transformation into low-density polyethylene. The heat promoted the sulfonation and carbonization of the plastic and induced a higher density of pores for catching polysulfide. The low-density polyethylene plastic could then be made into a carbon scaffold to divide the lithium and sulfur halves of a battery coin cell.

"The plastic-derived carbon from this process includes a sulfonate group with a negative charge, which is also what polysulfide has," Kim said. Sulfonated low-density polyethylene made into a carbon scaffold, therefore, suppressed polysulfide by having a similar chemical structure.

"This is the first step for improving the capacity retention of the battery," Pol said. "The next step is fabricating a bigger-sized battery utilizing this concept."

Explore further: Researchers charge ahead to develop better batteries

More information: Patrick J. Kim et al. Toward High-Performance Lithium–Sulfur Batteries: Upcycling of LDPE Plastic into Sulfonated Carbon Scaffold via Microwave-Promoted Sulfonation, ACS Applied Materials & Interfaces (2018). DOI: 10.1021/acsami.8b03959

Related Stories

Researchers charge ahead to develop better batteries

March 26, 2018

Batteries die at the most inconvenient times. Cellphones go dark during important conversations because a battery hasn't been recharged. Or the automotive industry revs up with excitement for a new battery-powered vehicle, ...

Building lithium-sulfur batteries with paper biomass

April 2, 2018

A major byproduct in the papermaking industry is lignosulfonate, a sulfonated carbon waste material, which is typically combusted on site, releasing CO2 into the atmosphere after sulfur has been captured for reuse.

A new approach to improving lithium-sulfur batteries

March 6, 2017

Rechargeable lithium-ion batteries are the power behind most modern portable electronics, including cell phones, tablets, laptops, fitness trackers, and smart watches. However, their energy density—that is, the amount of ...

Graphene unlocks the promise of lithium sulfur batteries

December 18, 2017

Many battery scientists are interested in the potential of lithium sulfur batteries because, at least in theory, they offer a high energy density at relatively low cost. However, lithium sulfur batteries face a number of ...

Recommended for you

New targets in the battle against antibiotic resistance

November 16, 2018

Bacteria are increasingly resistant to available antibiotics. A team of chemists from the Technical University of Munich (TUM) have now identified important enzymes in the metabolism of staphylococci. Blocking these enzymes ...

AI heralds new frontiers for predicting enzyme activity

November 16, 2018

Researchers from the Departments of Chemistry and Engineering Science at the University of Oxford have found a general way of predicting enzyme activity. Enzymes are the protein catalysts that perform most of the key functions ...

1 comment

Adjust slider to filter visible comments by rank

Display comments: newest first

Parsec
not rated yet May 09, 2018
Plastic can be broken down into its constituent atoms rather easily using chemical, heat, plasmas, etc. It is even slowly eaten by bacteria (as is anything made of carbon). The old myth that plastic is so "unnatural" that it never breaks down is just that... a myth. Even plastic in landfills breaks down eventually unless it deliberately placed in a dry sterile environment.

Having said all that, discovering a purpose for old used up plastic materials is a big win for the environment. Depending of course on how much plastic is consumed by these new uses.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.