New materials for sustainable, low-cost batteries

April 30, 2018 by Fabio Bergamin, ETH Zurich
The researchers produced aluminum button cells in the laboratory. The battery case is made of stainless steel coated with titanium nitride on the inside to make it corrosion resistant. Credit: ETH Zurich / Kostiantyn Kravchyk

A new conductor material and a new electrode material could pave the way for inexpensive batteries and therefore the large-scale storage of renewable energy.

The energy transition depends on technologies that allow the inexpensive temporary storage of electricity from renewable sources. A promising new candidate is aluminium batteries, which are made from cheap and abundant raw .

Scientists from ETH Zurich and Empa, led by Maksym Kovalenko, Professor of Functional Inorganic Materials, are among those involved in researching and developing batteries of this kind. The researchers have now identified two new materials that could bring about key advances in the development of aluminium batteries. The first is a corrosion-resistant material for the conductive parts of the battery; the second is a novel material for the battery's positive pole that can be adapted to a wide range of technical requirements.

As the electrolyte fluid in aluminium batteries corrodes stainless steel, gold and platinum, scientists are searching for corrosion-resistant materials for the conductive parts of these batteries. Titanium nitride, a ceramic material that exhibits sufficiently high conductivity, is such a conductor. "This compound is made up of the highly abundant elements titanium and nitrogen, and it's easy to manufacture," explains Kovalenko.

The scientists have successfully made aluminium batteries with conductive parts made of in the laboratory. The material can easily be produced in the form of thin films, also as a coating over other materials such as polymer foils. Kovalenko believes it would also be possible to manufacture the conductors from a conventional metal and coat them with titanium nitride, or even to print conductive titanium nitride tracks on to plastic. "The potential applications of titanium nitride are not limited to aluminium batteries. The material could also be used in other types of batteries; for example, in those based on magnesium or sodium, or in high-voltage lithium-ion batteries," says Kovalenko.

Molecular structure of polypyrene . Credit: Walter M et al. Advanced Materials 2018

The second new material can be used for the positive electrode (pole) of aluminium batteries. Whereas the negative electrode in these batteries is made of aluminium, the positive electrode is usually made of graphite. Now, Kovalenko and his team have found a new material that rivals graphite in terms of the amount of energy a battery is able to store. The material in question is polypyrene, a hydrocarbon with a chain-like (polymeric) molecular structure. In experiments, samples of the material—particularly those in which the molecular chains congregate in a disorderly manner—proved to be ideal. "A lot of space remains between the molecular chains. This allows the relatively large ions of the electrolyte fluid to penetrate and charge the electrode material easily," Kovalenko explains.

One of the advantages of electrodes containing polypyrene is that scientists are able to influence their properties, such as the porosity. The material can therefore be adapted perfectly to the specific application. "In contrast, the graphite used at present is a mineral. From a chemical engineering perspective, it cannot be modified," says Kovalenko.

As both nitride and polypyrene are flexible materials, the researchers believe they are suitable for use in "pouch cells" (batteries enclosed in a flexible film).

Batteries for the energy transition

An increasing amount of electricity is generated from solar and wind energy. However, as electricity is needed even when the sun is not shining and the wind is not blowing, new technologies will be needed, such as new types of batteries, to store this electricity in a cost-effective manner. Although existing lithium-ion batteries are ideal for electromobility due to their low weight, they are also quite expensive and therefore unsuitable for economical large-scale, stationary power storage.

Furthermore, lithium is a relatively rare metal and is hard to extract—unlike , magnesium or sodium. Batteries based on one of the latter three elements are thus seen as a promising option for stationary power storage in the future. However, such batteries are still at the research stage and have not yet entered industrial use.

Explore further: Step towards better 'beyond lithium' batteries

More information: Marc Walter et al, Polypyrenes as High-Performance Cathode Materials for Aluminum Batteries, Advanced Materials (2018). DOI: 10.1002/adma.201705644

Shutao Wang et al. Aluminum Chloride-Graphite Batteries with Flexible Current Collectors Prepared from Earth-Abundant Elements, Advanced Science (2018). DOI: 10.1002/advs.201700712

Related Stories

Low-cost battery from waste graphite

October 11, 2017

Lithium ion batteries are flammable and the price of the raw material is rising. Are there alternatives? Yes: Empa and ETH Zürich researchers have discovered promising approaches as to how we might produce batteries out ...

Team develops sodium ion batteries using copper sulfide

April 18, 2018

A KAIST research team recently developed sodium ion batteries using copper sulfide anode. This finding will contribute to advancing the commercialization of sodium ion batteries (SIBs) and reducing the production cost of ...

Researchers charge ahead to develop better batteries

March 26, 2018

Batteries die at the most inconvenient times. Cellphones go dark during important conversations because a battery hasn't been recharged. Or the automotive industry revs up with excitement for a new battery-powered vehicle, ...

Layered oxides for rechargeable zinc batteries

February 28, 2018

Layered oxides can form the basis of high-performance materials for battery electrodes. A KAUST team has developed a cheap and simple technique that creates this crucial element for rechargeable zinc-ion cells.

Recommended for you

Fluorine flows in, makes material metal

October 16, 2018

By getting in the way, fluorine atoms help a two-dimensional material transform from a semiconductor to a metal in a way that could be highly useful for electronics and other applications.

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.