How some battery materials expand without cracking

April 12, 2017 by David L. Chandler, Massachusetts Institute of Technology
Researchers may have determined why fairly brittle electrode materials in batteries don’t crack under the strain of expansion and contraction cycles when they are used and recharged. Credit: Jose-Luis Olivares/MIT

When you charge a battery, or when you use it, it's not just electricity but also matter that moves around inside. Ions, which are atoms or molecules that have an electric charge, travel from one of the battery's electrodes to the other, making the electrodes shrink and swell. In fact, it's been a longstanding mystery why fairly brittle electrode materials don't crack under the strain of these expansion and contraction cycles.

The answer may have finally been found. A team of researchers at MIT, the University of Southern Denmark, Rice University, and Argonne National Laboratory has determined that the secret is in the electrodes' molecular structure. While the are normally crystalline, with all their atoms neatly arranged in a regular, repetitive array, when they undergo the charging or discharging process, they are transformed into a disordered, glass-like phase that can accommodate the strain of the dimensional changes.

The new findings, which could affect future design and even lead to new kinds of actuators, are reported in the journal Nano Letters, in a paper by MIT professor of and engineering Yet-Ming Chiang, graduate students Kai Xiang and Wenting Xing, and eight others.

In theory, if you were to stretch out a lithium-ion battery over a fulcrum, with an on each side, Chiang says, "it would go up and down like a seesaw" as it was being charged and discharged. The change in mass as ions shuttle back and forth is also accompanied by an expansion or contraction that can vary, depending on the material, "from 1 percent or so, all the way up to silicon, which can expand by 300 percent," he says.

These images, made by transmission electron microscopy, show the progression of the sodium-olivine electrode material, first in the original starting material in powdered form (a); after sodium is inserted in different concentrations (b and c); and after an amorphous, glassy structure forms in between tiny areas of microcrystalline structure (d and e). Credit: Massachusetts Institute of Technology

This research dealt with a different kind of battery, called a sodium-ion battery. The scientists looked at a particular class of seen as potential battery cathodes (positive electrodes), called phospho-olivines, and specifically at sodium-iron-phosphate (NaFePO4). They found that it is possible to fine-tune the volume changes over a very wide range—changing not only how much the material expands and contracts, but also the dynamics of how it does so. For some compositions, the expansion is very slow and gradual, but for others it can increase suddenly.

"Within this family of olivines," Chiang says, "we can have this slow, stepwise change," spanning the whole range from almost zero charge to very high power. Alternatively, the change can be "something very drastic," as is the case with NaFePO4, which rapidly changes its volume by about 17 percent.

"We know that brittle compounds like this would normally fracture with less than a 1 percent volume change," Chiang says. "So how does this material accommodate such large volume changes? What we found, in a sense, is that the crystal gives up and forms a disordered glass" instead of maintaining its precisely ordered lattice.

"This is a mechanism that we think might apply more broadly to other compounds of this kind," he says, adding that the finding may represent "a new way to create glassy materials that may be useful for batteries." Once the change to a glassy composition takes place, its volume changes become gradual rather than sudden, and as a result "it may be longer-lived," Chiang says.

These diagrams illustrate the way different materials expand when subjected to an influx of ions. Silicon, at right, has one of the highest degrees of expansion known. Credit: Massachusetts Institute of Technology

The findings could provide a new design tool for those trying to develop longer-lived, higher-capacity batteries, he says. It could also lead to possible applications in which the volume changes could be put to use, for example as robotic actuators or as pumps to deliver drugs from implantable devices.

The team plans to continue working on easier ways of synthesizing these olivine compounds, and determining whether there is a broader family of crystalline materials that shares this phase-changing property.

This research provides "a seminal contribution that links the electrochemical, mechanical, and crystallographic aspects of battery electrodes," says William Chueh, an assistant professor of materials science and engineering at Stanford University, who was not involved in this work.

"Electrode materials used in lithium-ion batteries shrink and expand during charging and discharging, and often disproportionally within a single particle. If the strain cannot be accommodated, the particle fractures, eventually causing the battery to fail. This is similar to a cold ceramic cup cracking when boiling water is poured in too quickly," Chueh says. This work "identifies a new strain-relief mechanism when the volume change is large, which involves the material turning from a crystalline solid to an amorphous one rather than fracturing."

This discovery, he says, "may lead scientists to revisit battery materials previously deemed unusable due to the large volume change during charging and discharging. It would also lead to better predictive models used by engineers to design new generation batteries."

Explore further: High storage batteries from sodium ion batteries

More information: Kai Xiang et al. Accommodating High Transformation Strains in Battery Electrodes via the Formation of Nanoscale Intermediate Phases: Operando Investigation of Olivine NaFePO, Nano Letters (2017). DOI: 10.1021/acs.nanolett.6b04971

Related Stories

High storage batteries from sodium ion batteries

October 26, 2016

The mechanism of sodium ion storage in an important two-dimensional material could be a simpler and less toxic route to cheaper batteries, a team of KAUST researchers discovered.

New method increases energy density in lithium batteries

October 24, 2016

Yuan Yang, assistant professor of materials science and engineering at Columbia Engineering, has developed a new method to increase the energy density of lithium (Li-ion) batteries. He has built a trilayer structure that ...

Developing the battery of the future

October 30, 2014

The search for the next generation of batteries has led researchers at the Canadian Light Source synchrotron to try new methods and materials that could lead to the development of safer, cheaper, more powerful, and longer-lasting ...

Nanomaterials and lithium rechargeable batteries

July 13, 2016

(TechXplore)—In a review article in Nature Energy, Yongming Sun, Nian Liu, and Yi Cui from Stanford University survey how nanomaterials have advanced the field of lithium rechargeable batteries and what obstacles still ...

"High-occupancy" vehicle (HOV) battery

August 17, 2016

In lithium-ion batteries, a singly charged lithium atom (or "ion") flows between two electrodes while one electron is contributed to the electrical current in the external circuit. If too many lithium ions are intercalated ...

Recommended for you

Scientists create gold nanoparticles in water

April 19, 2018

An experiment that, by design, was not supposed to turn up anything of note instead produced a "bewildering" surprise, according to the Stanford scientists who made the discovery: a new way of creating gold nanoparticles ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.