Quest to find the 'missing physics' at play in landslides

August 30, 2016, American Institute of Physics
The final deposit of the Blackhawk landslide in Southern California. This landslide originated in the mountains in the background and flowed out many times its initial flow height over near-flat ground. Credit: Kerry Sieh.

During the 1990s, Charles S. Campbell, now a professor in the Department of Aerospace and Mechanical Engineering at the University of Southern California, began exploring why large landslides flow great distances with apparently little friction, and the larger the volume of flowing rock the lesser the friction.

A landslide is a large-scale example of a granular flow, in which solid particles move like a fluid—think sand flowing through an hourglass. Large-scale revealed that friction in landslides behaved in a way that ran contrary to all existing theories for granular flow, and this inspired a quest to track down the "missing physics" in action during landslides.

A key piece of the puzzle was discovered by Campbell in 2002 and 2005 when he tapped the elastic properties of particles to draw a flow map for all granular flows by splitting it into two separate régimes: an "elastic régime" dominated by force chains—heavily loaded quasi-linear "columns" of particles that form internally to the flowing granules—that are strongly dependent on elastic properties versus an "inertial régime" free of force chains.

The latest discovery, which Campbell and graduate student Tontong Guo report this week in Physics of Fluids, involves using annular shear cell measurements of granular flows to confirm that the two flow régimes exist.

An annular shear cell is a device for measuring particle flow properties, and Campbell and Guo ran tests on four different kinds of plastic spherical particles at constant volume flow rates and constant applied stress flows.

"These experiments were difficult to perform," Campbell acknowledged.

The annular shear cell used for Campbell and Guo's experiments. Credit: Campbell/Guo

But it was well worth the effort, because "it confirmed our results from 2002 and 2005—we were able to observe the various régimes and the transitions between them," said Campbell. "In the recently discovered 'elastic-inertial régime,' which is part of the elastic régime, the apparent friction increases with shear rate and is probably where the landslide simulations were operating, although the effect might not be strong enough to explain the low friction observed in long-runout landslides."

Whereas the earlier work was done using discrete particle computer simulations, the most recent work used direct experimentation.

The implications of this work are significant because almost all solid materials in industries ranging from mining to pharmaceuticals are handled or processed in granular form.

"Granular materials flow under gravity and gravity-driven chutes and hoppers are often used to move materials around these plants. Unfortunately, little is known about how these materials flow so these devices are often designed by trial, which is very expensive," Campbell explained. "Our current work adds to the basic understanding of granular flow properties."

What's next for the group?

"The discrete particle computer simulations used in the early stages of our work are now ubiquitous, and modern computers can be used to model the granular flow through entire processing plants, so they're starting to be used during the design process for factories," said Campbell. "Material properties of the particles are the inputs to such programs. We plan to compare the data from these experiments with simulations as a way to assess the most important material properties and how closely we need to match the input properties to get reasonable results from the simulations."

Explore further: Feeling the force between sand grains

More information: "An Experimental Study of the Elastic Theory for Granular Flows," Physics of Fluids, DOI: 10.1063/1.4961096

Related Stories

Feeling the force between sand grains

August 24, 2016

For the first time, Lawrence Livermore National Laboratory (LLNL) researchers have measured how forces move through 3D granular materials, determining how this important class of materials might pack and behave in processes ...

Why cement tends to thicken

October 1, 2013

Researchers at the ETH Zurich have unraveled the microscopic mechanism behind shear thickening: the increase in viscosity with speed observed for dense particle suspensions under flow. The study has a direct impact on the ...

Hydrodynamics approaches to granular matter

March 26, 2015

Sand, rocks, grains, salt or sugar are what physicists call granular media. A better understanding of granular media is important - particularly when mixed with water and air, as it forms the foundations of houses and off-shore ...

Recommended for you

Pattern formation—the paradoxical role of turbulence

February 19, 2018

The formation of self-organizing molecular patterns in cells is a critical component of many biological processes. Researchers from Ludwig-Maximilians-Universitaet (LMU) in Munich have proposed a new theory to explain how ...

Converting heat into electricity with pencil and paper

February 19, 2018

Thermoelectric materials can use thermal differences to generate electricity. Now there is an inexpensive and environmentally friendly way of producing them with the simplest tools: a pencil, photocopy paper, and conductive ...

Bringing a hidden superconducting state to light

February 16, 2018

A team of scientists has detected a hidden state of electronic order in a layered material containing lanthanum, barium, copper, and oxygen (LBCO). When cooled to a certain temperature and with certain concentrations of barium, ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.