Researchers successfully fabricate a metamaterial using a lotus leaf as a template

November 5, 2015, Tokyo Institute of Technology
Scientists at Tokyo Institute of Technology have created an ultrathin, light-absorbing ‘biometamaterial’ using gold sputtered onto a lotus leaf. The natural nano-scale structures on the surface of the leaves created a material with very low reflectivity, which absorbs almost all light on the visible spectrum. Figure: Lotus flower, lotus leaf and scanning-electron microscope image of lotus leaf

Metamaterials are man-made substances whose properties are determined by their meticulously-designed structure. For example, metamaterials can be fabricated so that they interact with light or sound in a specific way. Unique surface structures play a vital role in metamaterials, and scientists have begun looking to nature itself for patterned surfaces from which to draw inspiration.

Now, Kotara Kajikawa and Yuusuke Ebihara at Tokyo Institute of Technology, together with Masayuki Shimojo at the Shibaura Institute of Technology, Japan, have fabricated a new 'biometamaterial' using a lotus leaf as a template. The new substance is capable of almost total absorption of light across the entire .

The researchers took advantage of the unique structure of the cells on the surface of a . The cilia on the leaves are in the form of tiny, randomly-orientated, macaroni-like nanorods, each measuring around 100 nanometers (nm) in diameter (see image). The team hypothesized that such a structure might confine light effectively.

Kajikawa and his colleagues coated a number of different leaves in a thin layer of gold film, applied in two different ways. Vacuum evaporation using thermal heating destroyed the nanorod structures on the leaf surface, but a spray 'sputtering' technique was far more successful. The resulting gold coating ranged in thickness from 10 nm to 30 nm on different samples. As well as lotus leaves, they also used leaves from three other plants as controls.

The researchers found that the 10 nm-thick gold biometamaterial created using lotus leaves exhibited reflectivity of less than 0.01 through the whole visible spectrum. Calculations showed that the low reflectivity, which results in almost complete absorption of light on the material's surface, appears to stem from the randomly-orientated nanorods on the leaf's surface.

Further work is in progress to see if Kajikawa and his team can find an easy and effective way to remove the gold biometamaterial from the leaf template once it is created.

Advances in metamaterials

Creating synthetic materials in order to manipulate electromagnetic waves is not a new concept. Indeed, the idea for metamaterials has been around for at least 100 years, but it is only in recent decades that the technology has really begun to take off. By designing the shape, geometry and orientation of a material with precise accuracy, properties can be achieved that are not possible in nature.

This is not to say that nature doesn't play a significant role in the design of such materials. Recently, researchers have begun to investigate the nano-scale surface structures and cell patterns in plants with the hope that natural surfaces will provide inspiration and templates for new 'biometamaterials'.

Recent technologies built using metamaterials include light absorbers, sensors, optical filters and cloaking devices, to name but a few. There is great potential for new metamaterial designs with unique and precise properties.

Methodology

The biometamaterial fabricated by Kotaro Kajikawa and co-workers uses the unique nanoscale structures on lotus leaves – the primary role of which is to create a highly water-repellent surface to the leaves. These structures are in the form of randomly-orientated nanorods, which the team believed would provide a useful template for a metamaterial designed to absorb light.

The researchers trialled two methods for creating a gold-based metamaterial on the surface of the leaves – vacuum evaporation using heat and a 'sputtering' technique. The first of these resulted in a completely smooth, golden reflective because the nanorod structures had collapsed on heating. Sputtering worked much better – scanning electron microscopy images revealed the intact randomly-orientated nanorods were preserved, and promising results were achieved in a biometamaterial made from a very thin 10 nm layer of gold.

This study highlights the potential in using naturally-occurring surfaces to generate very precise for specific purposes. The team are now working on ways of removing the biometamaterial from the leaf once it is created, a tricky process which the researchers believe can be achieved with a form of chemical treatment.

Explore further: Metamaterial absorbers for infrared inspection technologies

More information: Yuusuke Ebihara et al. Biometamaterials: Black Ultrathin Gold Film Fabricated on Lotus Leaf, Scientific Reports (2015). DOI: 10.1038/srep15992

Related Stories

Metamaterial absorbers for infrared inspection technologies

September 28, 2015

Plasmonic metamaterials are man-made substances whose structure can be manipulated to influence the way they interact with light. As such, metamaterials offer an attractive platform for sensing applications, including infrared ...

Silver nanocubes make super light absorbers

December 6, 2012

Microscopic metallic cubes could unleash the enormous potential of metamaterials to absorb light, leading to more efficient and cost-effective large-area absorbers for sensors or solar cells, Duke University researchers have ...

An improved method for coating gold nanorods

March 18, 2015

Researchers have fine-tuned a technique for coating gold nanorods with silica shells, allowing engineers to create large quantities of the nanorods and giving them more control over the thickness of the shell. Gold nanorods ...

Recommended for you

Study sheds light on—and through—2-D materials

September 24, 2018

The ability of metallic or semiconducting materials to absorb, reflect and act upon light is of primary importance to scientists developing optoelectronics—electronic devices that interact with light to perform tasks. Rice ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.