Ultra-thin, all-inorganic molecular nanowires successfully compounded

July 8, 2015
Ultra-thin, all-inorganic molecular nanowires successfully compounded
Structure of Mo–Te oxide molecular nanowire: This diagram shows structure of Mo–Te oxide nanowire. (a) Polyhedral representation and (b) ball-and stick representation of a hexagonal unit of [TeIVMoVI6O21]2-, (c) a single molecular wire of Mo–Te oxide. The bridge oxygen atoms that connect the hexagonal units are highlighted in yellow. (d) Assembly of single molecular wires into crystalline Mo–Te oxide. Mo: blue, Te (Se): brown, O: red. Credit: Zhang, et al., Nature Communications 6, 7731, Fig. 3.

The development of metal oxide-based molecular wires is important for fundamental research and potential practical applications. However, examples of these materials are rare. Researchers from Hokkaido University, Kanagawa University, Hiroshima University and Japan Synchrotron Radiation Research Institute/SPring-8, Japan, successfully created ultrathin all-inorganic molecular nanowires, composed of a repeating hexagonal molecular unit made of Mo and Te; the diameters of these wires were only 1.2 nm.

Nanowires are wired-shaped materials with diameters that are tens of nanometers or less. There are many types of nanowires, including semiconducting composite nanowires, metal oxide composite nanowires, and organic polymer nanowires, and they are typically used in functional materials and devices used as sensors, transistors, semiconductors, photonics devices, and solar cells.

Molecular wires composed of only inorganic materials have attracted significant attention due to their stable structures, tunable chemical compositions, and tunable properties. However, there have only been a few reports regarding the development of all-inorganic molecular nanowires.

Dr. Zhenxin Zhang and Prof. Wataru Ueda at the Catalysis Research Center at Hokkaido University (Prof. Ueda is currently working for Kanagawa University) and their collaborators at Hokkaido University, Hiroshima University, and Japan Synchrotron Radiation Research Institute/SPring-8 successfully created ultrathin all-inorganic molecular nanowires, composed of a repeating hexagonal molecular unit made of Mo and Te; the diameters of these wires were only 1.2 nm. These nanowires were obtained by the disassembly of the corresponding crystals through cation exchange and subsequent ultrasound treatment.

Furthermore, the researchers have shown that the ultrathin molecular -based material exhibits high activity as an acid catalyst, and the band gap of the molecular wire-based crystal is easily tuned via heat treatment. It is expected that the metal oxide -based materials will open up new fields of research in heterogeneous catalysts, thermochromic , and semiconductors, as well as other related fields.

"This is a very rare isolated molecular nanowire based on transition metal-oxygen octahedra, and is an attractive catalyst due to the large surface area," said Professor Masahiro Sadakane, a coauthor of this study, from Hiroshima University.

Explore further: Nanospace-controlled gold material created using molecular technology

More information: "Ultrathin inorganic molecular nanowire based on polyoxometalates." Nature Communications 6, Article number: 7731 DOI: 10.1038/ncomms8731

Related Stories

Nanowires could be the LEDs of the future

June 24, 2015

The latest research from the Niels Bohr Institute shows that LEDs made from nanowires will use less energy and provide better light. The researchers studied nanowires using X-ray microscopy and with this method they can pinpoint ...

Uniform nanowire arrays for science and manufacturing

December 3, 2014

Defect-free nanowires with diameters in the range of 100 nanometers (nm) hold significant promise for numerous in-demand applications including printable transistors for flexible electronics, high-efficiency light-emitting ...

Scalable growth of high quality bismuth nanowires

December 11, 2014

Bismuth nanowires have intriguing electronic and energy-harvesting application possibilities. However, fabricating these materials with high quality and in large quantities is challenging.

Recommended for you

Nanotube fiber antennas as capable as copper

October 23, 2017

Fibers made of carbon nanotubes configured as wireless antennas can be as good as copper antennas but 20 times lighter, according to Rice University researchers. The antennas may offer practical advantages for aerospace applications ...

Resistive memory components the computer industry can't resist

October 23, 2017

Make way for some new memsistors. For years, the computer industry has sought memory technologies with higher endurance, lower cost, and better energy efficiency than commercial flash memories. Now, an international collaboration ...

Taming 'wild' electrons in graphene

October 23, 2017

Graphene - a one-atom-thick layer of the stuff in pencils - is a better conductor than copper and is very promising for electronic devices, but with one catch: Electrons that move through it can't be stopped.

Breakthrough in ultra-fast data processing at nanoscale

October 20, 2017

A research team from the National University of Singapore has recently invented a novel "converter" that can harness the speed and small size of plasmons for high frequency data processing and transmission in nanoelectronics.


Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.