NRL licenses new polymer resin for commercial applications

May 6, 2015, Naval Research Laboratory
The NRL-developed polyetheretherketone (PEEK)-like phthalonitrile-resin can be used to make composite components including aircraft, ship, automotive, and wind blade structural components; battery casings; fire-resistant textiles and structural composites; robotic and autonomous systems applications; and ammunition casings and storage containers. Credit: DoD/U.S Navy

The U.S. Naval Research Laboratory (NRL) Chemistry Division and Technology Transfer Office announce today the signing of licensing agreements for the commercial manufacturing of an NRL-developed PEEK-like phthalonitrile (PN) resin composition. Inventors of the licensed patents are Teddy M. Keller, Matthew Laskoski, and Andrew P. Saab of the Materials Chemistry Branch in the Chemistry Division.

"The many attractive features of the second-generation polyetheretherketone PEEK-like phthalonitriles make these resins excellent candidates for numerous military and domestic applications," said, Teddy Keller, Ph.D., head, NRL Advanced Materials Section. "The NRL-developed phthalonitrile-based polymeric composites exhibit superior flame resistant, high temperature, and low water absorption properties that do not exist in the current marketplace."

Phthalonitrile-based polymers constitute a class of high temperature thermosets that remain strong at temperatures up to 500 degrees Celsius (C) and are easily processed into shaped fiber reinforced composite components by low-cost non-autoclave techniques.

The resin can be used to make composite components by established industrial methods such as resin transfer molding (RTM), resin infusion molding (RIM), filament winding, prepreg consolidation, and potentially by automated composite manufacturing techniques such as automated tape laying and automated fiber placement.

NRL's PEEK-like phthalonitrile resins were also measured to have excellent dielectric permittivity and loss tangent characteristics for potential high temperature radomes and other applications requiring radiofrequency transparency. The viscosity of the curing PN composition can be readily controlled as a function of the curing additive and temperature and the B-staged prepolymer intermediate can be stored indefinitely under ambient condition until ready to convert to the thermoset polymer or to use in the fabrication of a composite component. The ability to cure to a shaped solid or composite below 200 C and the superior physical properties relative to other high temperature polymers such as polyimides enhance the importance of the phthalonitrile system.

Due to their low water absorption, processing temperatures comparable to common epoxy resins, and superior thermo-oxidative stability at temperatures in excess of 375 C, the second-generation PEEK-like phthalonitrile-based polymers can revolutionize the use of composites in applications including lightweight automobiles, ships, oil rigs, aircraft, wind blades, high temperature bearings, valves, battery and electronic casings, fire resistant textiles, robotic and autonomous firefighting on ships, ammunition casings and storage containers, and fire-resistant building materials.

A notable aspect of this second generation technology is the ability to melt the resin and to control its initial cure to the shaped solid below 200 C. This permits NRL's phthalonitriles to be processed in the same way as ordinary commercial resins, using standard industrial composite manufacturing methods—a vital technological advantage to the aerospace, ship, and other domestic industries.

The oligomeric PEEK-like phthalonitrile is a liquid above 70 C and polymerizes to a thermoset occurring above 150 C, giving it an ample processing temperature window. The rate of polymerization is controlled as a function of temperature and the amount of curing additive, and the fully cured void-free phthalonitrile polymer does not exhibit a (does not melt or soften) when post-cured to temperatures greater than 375 C. NRL's phthalonitrile resins/prepolymers or resin prepregs have an indefinite shelf life without the need for refrigeration.

Explore further: Navy develops high impact, high integrity polymer for air, sea, and domestic applications

Related Stories

Carbon nanotube composites for enzymes and cosmetics

September 6, 2011

Japanese researchers have developed a low cost and efficient method for producing electrically conducting composites based on electrostatic adsorption of CNTs onto resin and ceramic particles for applications including enzymes ...

A new class of recyclable thermoset plastics

May 16, 2014

Plastics comprise around 10% of solid waste in Australia. And while we can recycle certain types, there is a group of particularly stable plastics called thermosets, common in electronic devices, which can't be broken down ...

Wood-polymer composite furniture with low flammability

May 4, 2015

Wood is a popular material in interior design, but its water absorbency limits its use in bathrooms, where natural wood easily becomes discolored or moldy. Fraunhofer scientists and partners have developed a wood-polymer ...

Vascular composites enable dynamic structural materials

July 26, 2011

Taking their cue from biological circulatory systems, University of Illinois researchers have developed vascularized structural composites, creating materials that are lightweight and strong with potential for self-healing, ...

Recommended for you

Japan to make crater on asteroid to get underground samples

March 18, 2019

Japan's space agency said Monday that its Hayabusa2 spacecraft will follow up last month's touchdown on a distant asteroid with another risky mission—dropping an explosive on the asteroid to make a crater and then collect ...

Bright X-ray galactic nuclei

March 18, 2019

All massive galaxies are believed to host supermassive black holes (SMBH) at their centers that grow by accreting mass from their environment. The current picture also imagines that the black holes grow in size as their host ...

1 comment

Adjust slider to filter visible comments by rank

Display comments: newest first

Abdeutschramon
not rated yet May 07, 2015
The Naval Research Laboratory...
is certainely a great & respectuous institution,but the stratégic need currently for our friend Edge American searchers & all Humanity is :
* Dépassement de la vitesse de la Lumière par nos Engins spatiaux ( découverte de nouveaux matériaux ,de nouveaux Lanceurs).
* l'Introduction "Urgente et Rapide" de l'utilisation de l'Energie Nucléaire dans les nouveaux "MOTEURS"
des vaisseaux spatiaux. ( Planifier des variantes de sortie :"hors de notre Galaxie" et allonger la Durée des voyages interstellaires)!!!
* Accroitre la Durée de vie des Savants et chercheurs +140 ans to 160 afin de leur permettre "de perenniser" l'Humain dans cet "Immense Espace Chaotique"(Car tout peut basculer: et tout ce qui a été créer pendant des millions d'années par la NATURE & des MILLIERS d'années par l'Homme ) peut etre "détruit" en l'espace de "Quelques Minutes"!!!
D'ou la nécéssité : d'une conquete rapide d'autres planètes !!!

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.