A new way to create compact light sources

June 9, 2014 by Glenn Roberts Jr.
Muhammad Shumail, a PhD student, inspects the microwave undulator that he worked to design and build. Credit: Fabricio Sousa/SLAC

(Phys.org) —SLAC scientists have found a new way to produce bright pulses of light from accelerated electrons that could shrink "light source" technology used around the world since the 1970s to examine details of atoms and chemical reactions.

Traditionally this light is created by wiggling accelerated electrons with heavy magnets in a device called an undulator. Undulators currently produce bright X-ray pulses for experiments at dozens of sites, including SLAC's Stanford Synchrotron Radiation Lightsource (SSRL) and Linac Coherent Light Source (LCLS) free-electron X-ray laser. The new approach replaces the magnets with microwaves, and designers say it could be scaled to produce X-ray light.

"This is a radical new design that can be used to create light sources that are more compact than can be achieved using a conventional undulator," said Sami Tantawi, a SLAC particle physics and astrophysics professor who led the development effort.

The undulator can produce shorter wavelengths of light – using less driving energy from electrons than conventional undulators. This means the accelerator that feeds it electrons can shrink considerably, Tantawi said.

A Step Toward Tabletop X-ray Lasers

"This brings us much closer to the dream of a tabletop X-ray free-electron laser," Tantawi said. "We have proved, in principle, that this is possible."

Electrons beamed into the undulator encounter rapidly alternating high-power microwave fields that cause the electrons to wiggle, emitting light at specific wavelengths. The wavelength and other properties of this light can be precisely tuned to suit many different types of experiments by adjusting the energy of the electrons and the microwave power.

This microwave undulator, designed and built at SLAC, uses microwave power and electrons to produce shorter-wavelength pulses, and is highly tunable compared to conventional undulators that use magnets. Credit: Glenn Roberts Jr./SLAC

Tantawi said, "Because it doesn't have any moving parts, the microwave undulator is amenable to scaling down to very short wavelengths." Increasing its length and supplying more electron energy could allow it to produce X-ray pulses like those generated by the LCLS X-ray laser. Its scalability and rapid tuning sets it apart from other next-generation undulators, he noted.

A Next-generation Source of Highly Tunable Light

The new device, featured on the cover of the April 25 edition of Physical Review Letters, could be used to provide more highly tailored light pulses that open new realms of experimental possibilities, particularly for studies of materials with exotic properties. It could be incorporated into next-generation lasers, synchrotrons and particle colliders and installed in existing facilities, such as SLAC's LCLS and SSRL.

Also, Tantawi said he would like to pursue a superconducting version of the undulator that would require supercooling in order to produce a more continuous stream of light for experiments.

"This technology has vast potential to dynamically control the properties of the light for use in many scientific experiments," Muhammad Shumail, a PhD student who is writing his thesis about the undulator, said.

With further miniaturization, it is conceivable that the microwave undulator could serve as a portable medical imaging source, Tantawi said. "The next step of the research is to really make this technology more available."

Top: This diagram shows a cutaway view of a microwave undulator designed and built at SLAC, with the path of the electron beam shown in white. (Bottom) Measurement of the electrical field traveling through the magnetic undulator (red), and a simulated view of the electromagnetic field created inside the undulator (blue) by the microwaves propagating through it. Credit: Physical Review Letters/10.1103/PhysRevLett.112.164802

SLAC technologist Gordon Bowden said building the prototype device was challenging, requiring specialized tools to cut a series of tiny ribs from the inside of the copper pipe the undulator is made of. The ends of the device had to be precisely tapered to better trap the microwave energy in the device.

"No conventional undulator has the agility that this device can offer," Bowden said. "The unique properties of the that emerges from the undulator are due to the precise comb-like pattern of the microwave fields trapped inside," he said.

From left: Eric Hemsing, Michael Dunning, and Stephen Weathersby assisted with the microwave undulator project at SLAC. Credit: Glenn Roberts Jr./SLAC

Unique Expertise

Tantawi said SLAC's historic and unique expertise in accelerators and microwave technology was well-suited to the development of the new device. "This is one of the few places on the planet we could have built this," he said. The first magnetic undulator was built by Stanford researchers in the 1950s.

The pursuit of the microwave undulator was inspired by Tantawi's conversations with X-ray free-electron laser pioneer Claudio Pellegrini and by Joachim Stöhr, SLAC photon science professor, and the design stemmed from his work on a similar design for an antenna that could be used to explore the so-called cosmic microwave background radiation, which is believed to hold clues to the earliest origins of the universe.

Explore further: SLAC scientists create twisted light

More information: "Experimental Demonstration of a Tunable Microwave Undulator." Sami Tantawi, Muhammad Shumail et al., Physical Review Letters 112, 164802 (2014), DOI: 10.1103/PhysRevLett.112.164802.

Related Stories

SLAC scientists create twisted light

September 19, 2013

(Phys.org) —Scientists at SLAC have found a new method to create coherent beams of twisted light – light that spirals around a central axis as it travels. It has the potential to generate twisted light in shorter pulses, ...

A new way to tune X-ray laser pulses

March 11, 2014

(Phys.org) —A new system at SLAC National Accelerator Laboratory's X-ray laser narrows a rainbow spectrum of X-ray colors to a more intense band of light, creating a much more powerful way to view fine details in samples ...

LCLS comes online

September 6, 2010

The recently opened Linac Coherent Light Source (LCLS) at the SLAC National Accelerator Laboratory (SNAL) provides scientists around the world with a brilliant new tool to understand fundamental properties of atoms and materials ...

Girders Get the Green Light

September 18, 2008

(PhysOrg.com) -- The temperature is now stabilized at a mild 68 °F (20 °C), support pedestals are in place and aligned, the paint is dry and physicists are moving in. That's the scene in the Linac Coherent Light Source ...

X-ray laser pulses in two colors

March 27, 2013

(Phys.org) —SLAC researchers have demonstrated for the first time how to produce pairs of X-ray laser pulses in slightly different wavelengths, or colors, with finely adjustable intervals between them – a feat that will ...

New test bed probes the origin of pulses at LCLS

July 24, 2013

It all comes down to one tiny spot on a diamond-cut, highly pure copper plate. That's where every X-ray laser pulse at SLAC's Linac Coherent Light Source gets its start. That tiny spot must be close to perfect or it can impair ...

Recommended for you

Energy-harvesting bracelet could power wearable electronics

July 25, 2017

(Phys.org)—Researchers have designed a bracelet that harvests biomechanical energy from the wearer's wrist movements, which can then be converted into electricity and used to extend the battery lifetime of personal electronics ...

A bar magnet creates chaos in plasma

July 25, 2017

Placing a magnet on your refrigerator might hold up your calendar, but researchers from India's Saha Institute of Nuclear Physics found that placing one outside a plasma chamber causes a localized, fireball-like structure. ...

Smart surface enables advanced manipulation of droplets

July 25, 2017

For many years, engineers have sought to create a special kind of surface: one that can both repel and absorb liquids, and whose ability to do so—its "wetting behaviour"—can be quickly and precisely controlled. The technology ...


Adjust slider to filter visible comments by rank

Display comments: newest first

2.6 / 5 (5) Jun 09, 2014
"This brings us much closer to the dream of a tabletop X-ray free-electron laser,"

-Or tank-mounted. Or airborne. Or space-based. Or squad-carried.
5 / 5 (1) Jun 09, 2014
... aaaaand the blind squirrel picks up another nut.
Jun 10, 2014
This comment has been removed by a moderator.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.