Explained: Thermoelectricity

Apr 27, 2010 by David L. Chandler
Graphic: Christine Daniloff

(PhysOrg.com) -- Thermoelectricity is a two-way process. It can refer either to the way a temperature difference between one side of a material and the other can produce electricity, or to the reverse: the way applying an electric current through a material can create a temperature difference between its two sides, which can be used to heat or cool things without combustion or moving parts.

The first part of the thermoelectric effect, the conversion of heat to electricity, was discovered in 1821 by the Estonian physicist Thomas Seebeck and was explored in more detail by French physicist Jean Peltier, and it is sometimes referred to as the Peltier-Seebeck effect.

The reverse phenomenon, where heating or cooling can be produced by running an through a material, was discovered in 1851 by William Thomson, also known as Lord Kelvin (for whom the absolute Kelvin temperature scale is named), and is called the Thomson effect. The effect is caused by charge carriers within the material (either electrons, or places where an electron is missing, known as “holes”) diffusing from the hotter side to the cooler side, similarly to the way gas expands when it is heated. The thermoelectric property of a material is measured in volts per Kelvin.

These effects, which are generally quite inefficient, began to be developed into practical products, such as power generators for spacecraft, in the 1960s by researchers including Paul Gray, the electrical engineering professor who would later become MIT’s president. This work has been carried forward since the 1990s by Institute Professor Mildred Dresselhaus, Theodore Harman and his co-workers at MIT’s Lincoln Laboratory, and other MIT researchers, who worked on developing new materials based on the semiconductors used in the computer and electronics industries to convert temperature differences more efficiently into electricity, and to use the reverse effect to produce heating and cooling devices with no moving parts.

The fundamental problem in creating efficient thermoelectric materials is that they need to be good at conducting electricity, but not at conducting thermal energy. That way, one side can get hot while the other gets cold, instead of the material quickly equalizing the temperature. But in most materials, electrical and thermal conductivity go hand in hand. New nano-engineered materials provide a way around that, making it possible to fine-tune the thermal and electrical properties of the material. Some MIT groups, including ones led by professors Gang Chen and Michael Strano, have been developing such materials.

Such systems are produced for the heating and cooling of a variety of things, such as car seats, food and beverage carriers, and computer chips. Also under development by researchers including MIT’s Anantha Chandrakasan are systems that use the Peltier-Seebeck effect to harvest waste heat, for everything from electronic devices to cars and powerplants, in order to produce usable electricity and thus improve overall efficiency.

Explore further: Optimum inertial self-propulsion design for snowman-like nanorobot

add to favorites email to friend print save as pdf

Related Stories

Promising new material that could improve gas mileage

Oct 09, 2008

With gasoline at high prices, it's disheartening to know that up to three-quarters of the potential energy you are paying for is wasted. A good deal of it goes right out the tailpipe instead of powering your car.

Self-powered sensors

Feb 11, 2010

It can be inconvenient to replace batteries in devices that need to work over long periods of time. Doctors might have to get beneath a patient’s skin to replace batteries for implanted biomedical monitoring ...

Mismatched alloys are a good match for thermoelectics

Jan 26, 2010

(PhysOrg.com) -- Using the supercomputers at NERSC, Berkeley Lab researchers demonstrated that the semiconductors known as highly mismatched alloys (HMAs) hold great promise for the future development of high ...

A new material could act as a nanofridge for microchips

Oct 08, 2008

In the past few years, the design and manufacturing of circuits at nanoscopic scale for integrated devices has become one of the frontier fields in new material science and technology. The significant reduction achieved in ...

Recommended for you

A transistor-like amplifier for single photons

18 hours ago

Data transmission over long distances usually utilizes optical techniques via glass fibres – this ensures high speed transmission combined with low power dissipation of the signal. For quite some years ...

User comments : 3

Adjust slider to filter visible comments by rank

Display comments: newest first

winthrom
5 / 5 (1) Apr 27, 2010
I would like some links to products and research on the subject of efficient thermo-electrics. Can anyone help?
in7x
1 / 5 (1) Apr 27, 2010
YankInOz
1 / 5 (1) Apr 27, 2010
Sure, absolutely:

http://tinyurl.com/33g84r3


OH, I like that - I will use that from now on... Thank you

lmgtfy.com