New robots mimic fish's swimming (w/ Video)

Aug 24, 2009 by Anne Trafton
Pablo Valdivia Y Alvarado, a research affiliate in the Department of Mechanical Engineering, works in his lab on a robotic fish he created with Professor Kamal Youcef-Toumi. The robot is designed to more easily maneuver into areas where traditional underwater autonomous vehicles cannot go. Photo / Patrick Gillooly/MIT News Office

( -- Borrowing from Mother Nature, a team of MIT researchers has built a school of swimming robo-fish that slip through the water just as gracefully as the real thing, if not quite as fast.

Mechanical engineers Kamal Youcef-Toumi and Pablo Valdivia Y Alvarado have designed the sleek robotic fish to more easily maneuver into areas where traditional underwater autonomous vehicles can’t go. Fleets of the new robots could be used to inspect submerged structures such as boats and oil and gas pipes; patrol ports, lakes and rivers; and help detect environmental pollutants.

“Given the (robotic) fish’s robustness, it would be ideal as a long-term sensing and exploration unit. Several of these could be deployed, and even if only a small percentage make it back there wouldn't be a terrible capital loss due to their low cost,” says Valdivia Y Alvarado, a recent MIT PhD recipient in mechanical engineering.

This video is not supported by your browser at this time.

Robotic fish are not new: In 1994, MIT ocean engineers demonstrated Robotuna, a four-foot-long robotic fish. But while Robotuna had 2,843 parts controlled by six motors, the new robotic fish, each less than a foot long, are powered by a single motor and are made of fewer than 10 individual components, including a flexible, compliant body that houses all components and protects them from the environment. The motor, placed in the fish’s midsection, initiates a wave that travels along the fish’s flexible body, propelling it forward.

The robofish bodies are continuous (i.e., not divided into different segments), flexible and made from soft polymers. This makes them more maneuverable and better able to mimic the swimming motion of real fish, which propel themselves by contracting muscles on either side of their bodies, generating a wave that travels from head to tail.

“Most swimming techniques can be copied by exploiting natural vibrations of soft structures,” says Valdivia Y Alvarado.

Professor Kamal Youcef-Toumi holds two robotic fishes he designed with recent PhD student Pablo Valdivia. The sleek robots can more easily maneuver into areas where traditional underwater autonomous vehicles can't go. Photo / Patrick Gillooly/MIT News Office

As part of his doctoral thesis, Valdivia Y Alvarado created a model to calculate the optimal material properties distributions along the ’s body to create a fish with the desired speed and swimming motion. The model, which the researchers initially proposed in the journal Dynamic Systems Measurements and Control (ASME), also takes into account the robot’s mass and volume. A more detailed model is described in Valdivia Y Alvarado’s thesis and will soon be published along with new applications by the group.

Other researchers, including a team at the University of Essex, have developed new generations of robotic fish using traditional assembly of rigid components to replicate the motions of fish, but the MIT team is the only one using controlled vibrations of flexible bodies to mimic biological locomotion.

“With these polymers, you can specify stiffness in different sections, rather than building a robot with discrete sections,” says Youcef-Toumi. “This philosophy can be used for more than just fish” — for example, in robotic prosthetic limbs.

Mimicking fish

With motors in their bellies and power cords trailing as they swim, the robo-fish might not be mistaken for the real thing, but they do a pretty good fish impersonation.

The team’s first prototypes, about five inches long, mimic the carangiform swimming technique used by bass and trout. Most of the movement takes place in the tail end of the body. Fish that use this type of motion are generally fast swimmers, with moderate maneuverability.

Later versions of the robo-fish, about eight inches long, swim like tuna, which are adapted for even higher swimming speeds and long distances. In tuna, motion is concentrated in the tail and the peduncle region (where the tail attaches to the body), and the amplitude of body motions in this region is greater than in carangiform fish.

Real fish are exquisitely adapted to moving through their watery environment, and can swim as fast as 10 times their body length per second. So far, the MIT researchers have gotten their prototypes close to one body length per second — much slower than their natural counterparts but faster than earlier generations of robotic fish.

The new robo-fish are also more durable than older models — with their seamless bodies, there is no chance of water leaking into the robots and damaging them. Several four-year-old prototypes are still functioning after countless runs through the testing tank, which is filled with tap water.

Current prototypes require 2.5 to 5 watts of power, depending on the robot’s size. That electricity now comes from an external source, but in the future the researchers hope to power the robots with a small internal battery.

Later this fall, the researchers plan to expand their research to more complex locomotion and test some new prototype robotic salamanders and manta rays.

“The were a proof of concept application, but we are hoping to apply this idea to other forms of locomotion, so the methodology will be useful for mobile robotics research — land, air and underwater — as well,” said Valdivia Y Alvarado.

Provided by Massachusetts Institute of Technology (news : web)

Explore further: Robot researcher combines nature to nurture 'superhuman' navigation

add to favorites email to friend print save as pdf

Related Stories

Fish-shaped robot for underwater research

Dec 16, 2004

The project of underwater bionic robotic fish co-developed by the Institute of Robot under Beijing University of Aeronautics and Astronautics (BUAA) and the Institute of Automation under Chinese Academy of Sciences ...

Robotic fish in action at London Aquarium

Oct 06, 2005

There may be a different fish to see for every day of the year at the London Aquarium at County Hall, but there’s a new variety that has never swum any of the world’s oceans. From 6 October the Aquarium’s ...

How to Grow a Bigger Brain

Mar 06, 2006

Hatchery-reared steelhead trout show increased growth of some parts of the brain when small stones are scattered on the bottom of their tank, according to a new study by researchers at UC Davis. The brains ...

Recommended for you

Blackout? Robots to the Rescue

Sep 25, 2014

( —Big disasters almost always result in big power failures. Not only do they take down the TV and fridge, they also wreak havoc with key infrastructure like cell towers. That can delay search ...

User comments : 5

Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Aug 24, 2009
no video no proof.
not rated yet Aug 24, 2009
They sell these things as toys at Wal-Mart. They've been selling them for some time now.
not rated yet Aug 25, 2009
this is not new it was demonstrated by others at a third party lecture at staffordshire university 2 years ago
not rated yet Aug 25, 2009
I could make these with Jello, some scrap aluminum, 2 solenoids, a 555 timer, and a 9 volt battery. How much money was wasted here?
not rated yet Aug 25, 2009
As someone who has made more than a few swimming fish, I agree with the toy comments (to some extent) and with the jello comment (if modified, and only for very short term stuff) but not the solenoids, nor the 9 volt (for fish robots, figure 1 watt/kilogram for cruising and >100 W/kg for speed). It does take some finesse, talent, and a fair bit of knowledge about fluids and axial mechanics to make a decent fish robot. The Author, Trafton, has much of it correct, but 10 body lengths per second is nothing - many fish are capable of much more, and some can swimming multiples of that (indeed, some artificial fishes have exceeded 15 BL/sec). As for mantas (and making stuff for air swimming), go look at US patent 6,250,585 as an example, or check out US6,179,683 for an example of internally powered robofishes. What we really ought to have is less "we did it first" articles and more "prize for the fastest fish" competitions.

artificial swimming and flying fish (and other organisms) have a much longer and richer history than MIT would have one believe. There are dozens of teams building swimming and flying robots worldwide.