Energy-saving method checks refrigerant level in air conditioners

Jun 22, 2009 by Emil Venere
Energy-saving method checks refrigerant level in air conditioners
Purdue mechanical engineering graduate student Woohyun Kim, at right, and James Braun, a professor of mechanical engineering, use a new technique designed to save energy and servicing costs by indicating when air conditioners are low on refrigerant, preventing the units from working overtime. Technicians servicing home air conditioners might simply plug a personal digital assistant into the unit to read the refrigerant-charge information. The conventional method for accurately learning how much charge is in a system involves removing all of the refrigerant and weighing it, a time-consuming procedure that requires a vacuum pump. (Purdue University photo/Andrew Hancock)

(PhysOrg.com) -- Engineers have developed a technique that saves energy and servicing costs by indicating when air conditioners are low on refrigerant, preventing the units from working overtime.

The new "virtual refrigerant charge sensor" is particularly practical for automotive air conditioners, which tend to leak refrigerant more than other types of units, and also for household central air conditioning units, said James Braun, a professor of mechanical engineering at Purdue University.

Maintaining the proper "charge," or amount of refrigerant in a system, saves energy because air conditioners low on refrigerant must operate longer to achieve the same degree of cooling as properly charged units.

"Not only does the go down, but you also reduce the lifetime of the unit because it has to work harder, causing parts to wear out faster," Braun said. "It's also very time consuming and costly to have a technician check the refrigerant and charge it up to specification. To accurately learn how much charge is in the system, you have to remove all of the refrigerant and weigh it, a procedure that requires a vacuum pump and is quite time consuming."

The new alternative works by using to monitor the temperature of refrigerant at various points along the tubing in an air-conditioning unit. The technique is easy to use because the sensors are simply attached to the outside of the tubing, Braun said.

Researchers tested the system on various types of air conditioners running on conventional refrigerants, including R-22 and the more environmentally friendly R-410A, which is replacing R-22 in the latest units. The research has been funded by the California Energy Commission through its Public Interest Energy Research, or PIER, program.

Findings are detailed in a research paper presented June 22 during a meeting of the American Society of Heating, Refrigerating and Air Conditioning Engineers in Louisville, Ky. The technique also was described in a paper published in the journal HVAC&R Research. The paper was written by Braun and former mechanical engineering doctoral student Haorong Li, who is now an assistant professor of architectural engineering at the University of Nebraska.

Another research project at Purdue is nearing completion and has involved a more extensive evaluation of the virtual charge sensor. The project, also funded through California's PIER program, has been led by graduate student Woohyun Kim.

Purdue has applied for a patent on the technique, developed in research based at the university's Ray W. Herrick Laboratories.

Li and Braun created a software algorithm that interprets temperature-sensor data to estimate the amount of refrigerant in the system. The four sensors are attached to tubing running into and out of components called heat exchangers.

In air conditioning and refrigeration systems, liquid refrigerant evaporates in a heat exchanger called an evaporator, cooling the air. The refrigerant vapor turns back into a liquid in another heat exchanger called a condenser. During these evaporation and condensing steps, the refrigerant undergoes dramatic temperature changes.

Automotive air conditioning units equipped with the new refrigerant-charge system could activate a warning light on a car's dashboard. Technicians servicing home air conditioners might simply plug a personal digital assistant into the unit to read the refrigerant-charge information, Braun said.

Researchers began developing the technique four years ago.

"The method could be commercialized if a company invested some time in the implementation side," Braun said.

Provided by Purdue University (news : web)

Explore further: Lifting the brakes on fuel efficiency

add to favorites email to friend print save as pdf

Related Stories

NIST helps heat pumps 'go with the flow' to boost output

Jan 23, 2008

Air-source heat pumps typically deliver 1 1/2 to three times more heating energy to a home than the electric energy they consume. This is possible because heat pumps move heat rather than convert it from a ...

Scientists discuss carbon dioxide uses

Mar 13, 2006

The use of environmentally friendly carbon dioxide as a refrigerant instead of ozone-depleting chemicals will be discussed at Purdue University this week.

Staying Cool Shouldn't Burn a Hole in Your Wallet

Jul 07, 2006

Air conditioning costs don't have to take a big bite out of a family's budget during the dog days of summer, says a Purdue University expert on refrigeration and air conditioning. There are a number of practical and inexpensive ...

Purdue studies office building power

Jan 18, 2006

Purdue University engineers say they've developed a method of "pre-cooling" small office buildings, cutting energy consumption during times of peak demand.

Tiny refrigerator taking shape to cool future computers

Jun 19, 2008

Researchers at Purdue University are developing a miniature refrigeration system small enough to fit inside laptops and personal computers, a cooling technology that would boost performance while shrinking the size of computers.

Recommended for you

Lifting the brakes on fuel efficiency

Apr 18, 2014

The work of a research leader at Michigan Technological University is attracting attention from Michigan's Governor as well as automotive companies around the world. Xiaodi "Scott" Huang of Michigan Tech's ...

Large streams of data warn cars, banks and oil drillers

Apr 16, 2014

Better warning systems that alert motorists to a collision, make banks aware of the risk of losses on bad customers, and tell oil companies about potential problems with new drilling. This is the aim of AMIDST, the EU project ...

User comments : 3

Adjust slider to filter visible comments by rank

Display comments: newest first

deatopmg
not rated yet Jun 23, 2009
even more money can be saved and less environmental damage done by replacing the fluorinated hydrocarbons with about 1 tenth the amount of simple hydrocarbons like propane and/or iso-butane. Works great in my rejuvenated R-12 car AC.
Popawsandy3
not rated yet Jun 23, 2009
This is the dumbest bit of science I have seen in a while . Technitions have used suction superheat to charge A/C and refrigeration systems with refrigerant for the last 75 years [at least ] . This is not a new science ! I retired after 50 years in the business and am quite familiar with the science . There is nothing new here .
Shaoping
not rated yet Jun 24, 2009
I read it ,but I want to know more about it. I am at Hefei,Anhui,China.Please email your paper to me. My email: dsp88@126.com

More news stories

Growing app industry has developers racing to keep up

Smartphone application developers say they are challenged by the glut of apps as well as the need to update their software to keep up with evolving phone technology, making creative pricing strategies essential to finding ...

Making graphene in your kitchen

Graphene has been touted as a wonder material—the world's thinnest substance, but super-strong. Now scientists say it is so easy to make you could produce some in your kitchen.