Giant memory thanks to tiny capacitors

Jun 25, 2008

German-Korean research team produces a permanent memory using a new procedure and thereby sets a memory density record.

The electronics of the future are becoming increasingly smaller and lighter, as well as faster and more powerful. A method now developed by scientists at the Max Planck Institute of Microstructure Physics in Germany, Pohang University of Science and Technology (POSTECH) in Korea and the Korea Research Institute of Standards and Science (KRISS) may help to achieve these goals.

Giant memory thanks to tiny capacitors
Fig. 1: Memory under observation: The dot mask (above) and the nano-capacitors (below) can be seen in the image produced by the scanning electron microscope (above). The cross-section image of four platinum/PZT/platinum nano-capacitors taken using the transmission electron microscope (below) shows how neatly they are stacked. Image: Max Planck Institute of Microstructure Physics

The new method enables the production of particularly densely-packed moemory storage. Using an extremely finely perforated mask, the researchers housed capacitors made out of platinum and lead-zirconate-titanate (PZT) with a density of 176 billion bits on a square inch - a world record for this material. Such storage is easy to control and can save memory permanently. Chips made from this material could therefore replace current working memories in which saved bits have to be constantly refreshed.

Whether MP3 players, camera mobile phones, navigation systems or notebooks, all have to be compact but also able to store increasing large amounts of music, images, films or maps, and process them quickly. Innovative new memory would contribute greatly towards making electronics smaller and more powerful, especially if it were able to save information permanently, but still process data as quickly as the DRAMs on which computers currently store programs. "Permanent memory of this kind can be produced very simply and efficiently using our methods," said Dietrich Hesse, a scientist at the Max Planck Institute of Microstructure Physics in Halle, Germany, who played a prominent role in the work of the research team.

The permanent memory produced through the German-Korean cooperation can save 176 billion bits per square inch, which is 27 billion bits per square centimeter - more than any comparable memory made of this type of material. "We are approaching memory density of several terabits or billions of bits per square inch, and we hope to be able to increase the memory density even further," relates Dietrich Hesse. Such high memory density is necessary for more widespread use of permanent memory. They could, for example, make the hard-drive and tedious booting up of computers a thing of the past.

The nano-capacitors meet a further requirement for memory application: scientists can control each memory precisely, even though they are only 60 nanometers apart from one another. "This work shows that unconventional and previously overlooked production methods from associated fields in electronics research can mean significant progress in the search for high-density, solid-state memory," explains Professor Ulrich Gösele, Director at the Max Planck Institute of Microstructure Physics.

Giant memory thanks to tiny capacitors
Fig. 2: Capacitors in the mask: Thanks to a 100 nm thin mask made of aluminum oxide (above), the German and Korean research team were able to trickle the ceramic (PZT) onto the platinum layer (Pt). The scientists then cut off some platinum to create electrical contact to the ceramic. Image: Max Planck Institute of Microstructure Physics

The memory’s exceptional performance is a result of the principle on which they are based, as well as precision production: the ceramic material lead-zirconate-titanate is ferroelectric. In this type of material, all unit cells, the smallest parts of a crystal, have permanent electrical dipoles. These are comparable with magnetic dipoles in iron from which they take their name. Like the north and south pole of a magnet, the positive and negative poles of a permanent electrical dipole can be interchanged - but much more quickly.

This material can therefore save data permanently like a hard-drive, but processes it as quickly as a working memory. Lead-zirconate-titanate allows a titanion to be moved into the unit cell using an external electrical field at temperatures under 460 degrees Celsius. Above this temperature, the dipole constantly changes direction without external intervention.

The scientists then produced a 100 nm thin perforated mask made of aluminum oxide in order to house 176 billion capacitors made of this ferroelectric material on a square inch. To do this, they electrochemically oxidized an aluminum film, a method known as the Eloxal process, which has been used for decades to provide aluminum components with a protective coating and to give aluminum tableware and even some MP3 players a matt-metallic sheen. In this process, pores generally eat into the aluminum oxide in a random pattern. However, by carefully selecting the temperature, PH level and chemical composition during oxidation, the researchers forced the pores into a hexagonal arrangement where each pore is surrounded by six others. The hexagonal pattern though is distorted in some places, which makes it unusable as a mask for a memory. "If we shape the aluminum with a punch beforehand, the pores arrange themselves in a completely regular pattern," says Woo Lee of KRISS. The punch contains billions of points that leave an equal number of indentations in the aluminum. These indentations also help oxidation, providing the pores with a starting point to eat into the material.

Even with the finely perforated mask, the process is still incomplete. The Halle-based scientists placed the mask on a magnesium-oxide plate heated to 650 degrees Celsius. This plate is coated with platinum and serves as a support. They then vaporized it with a laser beam in a perfectly balanced PZT ratio until the ceramic has deposited 30 to 50 nanometers on the platinum. A thin platinum cover completes the capacitors in which the precious metal layer serve as electrodes and the ceramic serves as dielectric material. "We could, in principle, also use other materials for the electrodes," said Dietrich Hesse. Removing the thin masks did not present an insurmountable obstacle either. In doing so, the scientists must be careful that it does not break, leaving a part of it on the memory. With a high degree of skill and a piece of scotch tape, they easily managed to remove the mask. "Remarkably, the individual sandwiches made of platinum and PZT do not get caught in the pores," explains Dietrich Hesse adding, "Presumably, the capacitors that we heat to 650 degrees Celsius contract when cooling down before we remove the mask at room temperature."

The success of this project is also due to the fruitful German-Korean cooperation. "The unbureaucratic, close teamwork with the Korean scientists, who contributed their respective capabilities, experience and methods to the work, has paid off handsomely in this case," said Ulrich Gösele.

Source: Max-Planck-Institute of Microstructure Physics,

Explore further: World's first successful use of an electric circuit to compensate for distortions in electric signals due to heat

add to favorites email to friend print save as pdf

Related Stories

A new, tunable device for spintronics

Aug 28, 2014

Recently, the research group of Professor Jairo Sinova from the Institute of Physics at Johannes Gutenberg University Mainz in collaboration with researchers from the UK, Prague, and Japan, has for the first time realised ...

Recommended for you

Streaming release of 'Interview' test for industry

23 hours ago

Sony's "The Interview" has been a hacking target, a punchline and a political lightning rod. Now, with its release online at the same time it debuts in theaters, it has a new role: a test for a new kind of ...

User comments : 10

Adjust slider to filter visible comments by rank

Display comments: newest first

jaseman125
5 / 5 (5) Jun 25, 2008
I read so many of these exciting developments, but wonder how many of them actually make it to becoming a product. Will Western Digital be selling these anytime soon?
gopher65
4 / 5 (5) Jun 25, 2008
Yeah jaseman125, me too. Though, I remember reading about perpendicular recording methods being experimented with, and then just a few years later that method was being used in increase HDD space by 10 times.

So I'm sure one of these methods will work out. Maybe this one, maybe something else.
WolfAtTheDoor
3 / 5 (3) Jun 25, 2008
Amazing!
canuckit
3.8 / 5 (4) Jun 25, 2008
Nanotechnology is innovative and disruptive. Nanotechnology and spintronics technology products are slowly entering the market. Many memory technologies sold today will disappear in the coming years as well as traditional chip design jobs.
DGBEACH
5 / 5 (2) Jun 26, 2008
What is the leakage-current of these nano-capacitors? 'Cause if its non existant, which it would HAVE TO BE to maintain a charged state indefinitely, then they've just invented the perfect battery! If not then perhaps "capacitor" wasn't the best way to describe them.
gopher65
2.5 / 5 (2) Jun 26, 2008
DGBEACH, look at already existing memory types for your answer. Flash memory is essentially a bunch of capacitors stuck together. If those capacitors lose their charge, then the information stored in the Flash drive disappears. Yet Flash can store information for years without significant degradation.

As long as you have sufficient insulation around a capacitor, it won't leak (much). But the more insulation you use, the lower the energy density of the storage unit. For things like Flash drives that isn't a big deal, because they aren't intended to store large amounts of energy. If you are using a capacitor as a "battery", energy density matters a great deal.

And if you look around, you'll find that the big problem with all modern capacitors is their extremely low energy density (far lower than batteries of the same volume and mass). More insulation means slower leaking and a longer lifespan, but it compounds the main problem of low energy density.
Soylent
3 / 5 (1) Jun 26, 2008
DGBEACH, ferroelectric materials exhibit hysteresis. Such materials are capable of storing an apparent charge even while shorted and no electric field is applied.
DGBEACH
4.5 / 5 (2) Jun 26, 2008
Thanks for the answers. 'Just wondering how insulation works at the nano scale. I'll look into the ferroelectric materials.
Again thanks.
Mercury_01
2 / 5 (1) Jun 26, 2008
This is surprising. I hope it works out cause my portable hard drive is overflowing.
grampo
3.3 / 5 (3) Jun 26, 2008
Maybe nano-capacitors can eventually serve as a battery (increased energey storage capacity). If energy density would come close to LiOn, then they can probably claim the $300 million award ;-)

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.