Efficiency record for black silicon solar cells jumps to 22.1 percent

May 18, 2015
The surface area of the best cells in the study was already 9 cm2. This is a good starting point for upscaling the results to full wafers and all the way to the industrial scale. Credit: Aalto University

The researchers from Finland's Aalto University and Universitat Politècnica de Catalunya have obtained the record-breaking efficiency of 22.1% on nanostructured silicon solar cells as certified by Fraunhofer ISE CalLab. An almost 4% absolute increase to their previous record is achieved by applying a thin passivating film on the nanostructures by Atomic Layer Deposition, and by integrating all metal contacts on the back side of the cell.

The surface recombination has long been the bottleneck of black silicon and has so far limited the cell efficiencies to only modest values. The new record cells consists of a thick back-contacted structure that is known to be highly sensitive to the front surface recombination. The certified external quantum efficiency of 96% at 300nm wavelength demonstrates that the increased surface recombination problem no longer exists and for the first time the black silicon is not limiting the final energy conversion efficiency.

The results are published online in Nature Nanotechnology.

For Nordic conditions

"The is not the only parameter that we should look at," explains Professor Hele Savin from Aalto University, who coordinated the study. Due to the ability of black cells to capture solar radiation from low angles, they generate more electricity already over the duration of one day as compared to the traditional cells.

"This is an advantage particularly in the north, where the sun shines from a low angle for a large part of the year. We have demonstrated that in winter Helsinki, black cells generate considerably more electricity than traditional cells even though both cells have identical efficiency values," she adds.

In the near future, the goal of the team is to apply the technology to other cell structures - in particular, thin and multi-crystalline cells.

"Our record cells were fabricated using p-type silicon, which is known to suffer from impurity-related degradation. There is no reason why even higher efficiencies could not be reached using n-type silicon or more advanced cell structures," Savin predicts.

The development of the cells fabricated last year will continue in the upcoming "BLACK" project, supported by the European Union, in which Professor Savin together with her team will develop the technology further in cooperation with industry.

"The surface area of the best cells in the study was already 9 cm2. This is a good starting point for upscaling the results to full wafers and all the way to the industrial scale."

Explore further: Black silicon solar cells with record 18.7% efficiency

More information: 22.1% efficient black silicon solar cells with interdigitated back-contacts. Hele Savin, Päivikki Repo, Guillaume von Gastrow, Pablo Ortega, Eric Calle, Moises Garín and Ramon Alcubilla. Nature Nanotechnology. DOI: 10.1038/nnano.2015.89

Related Stories

Black silicon solar cells with record 18.7% efficiency

April 4, 2013

Scientists at Aalto University, Finland and Fraunhofer ISE, Germany report an efficiency of 18.7% for black silicon solar cells, the highest efficiency reported so far for a black silicon solar cell.

Nanostructures improve efficiency of solar cells

April 25, 2013

Researchers have been able to improve the efficiency of solar cells by coating the cell surface with extremely small nanoscale structures. The new technology has been shown to nearly eliminate the reflection losses of solar ...

Recommended for you

New method for studying individual defects in transistors

December 6, 2016

Scientists from the University of Twente's MESA+ Research Institute have developed a method for studying individual defects in transistors. All computer chips, which are each made up of huge numbers of transistors, contain ...

New aspect of atom mimicry for nanotechnology applications

December 2, 2016

In nanotechnology control is key. Control over the arrangements and distances between nanoparticles can allow tailored interaction strengths so that properties can be harnessed in devices such as plasmonic sensors. Now researchers ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.