Wild blue yonder: Engineers tackle challenges of hypersonic flight

May 16, 2012 By Simon Firth

(Phys.org) -- Aeronautical engineers believe hypersonic planes flying at seven to 15 times the speed of sound will someday change the face of air and space travel. That is, if they can master such flight's known unknowns.

Hypersonic flight is a particularly intense engineering challenge both in the placed on the structure of the plane and in the physics of the sophisticated engines that must operate in the extremes of the where the planes would fly.

Real-world laboratories can only go so far in reproducing such conditions, and test vehicles are rendered extraordinarily vulnerable. Of the U.S. government's three most recent tests, two ended in vehicle failure.

But now, thanks to a five-year, $20 million U.S. Department of Energy grant, an interdepartmental, multiyear research effort is under way at to use some of the world's fastest supercomputers to tackle these challenges virtually. 

The Stanford Predictive Science Academic Alliance Program (PSAAP) is using computers to model the physical complexities of the hypersonic environment –specifically, how fuel and air flow through a hypersonic aircraft engine, known as a scramjet engine.

PSAAP is a collaboration of the departments of mechanical engineering, aeronautics and astronautics, computer science and mathematics, plus Stanford's Institute for Computational and Mathematical Engineering.

In particular, the program focuses on what is known as the scramjet's 'unstart' problem, said Parviz Moin, the Franklin P. and Caroline M. Johnson Professor in the School of Engineering. He is the founding director of Stanford's Center for Turbulence Research and faculty director of PSAAP.

"If you put too much fuel in the engine when you try to start it, you get a phenomenon called 'thermal choking,' where shock waves propagate back through the engine," he explained. "Essentially, the engine doesn't get enough oxygen and it dies. It's like trying to light a match in a hurricane."

Modeling the unstart phenomenon requires a clear understanding of the physics and then reproducing mathematically the immensely complex interactions that occur at hypersonic speeds.

It is impossible to model the physical world exactly, said Juan Alonso, an associate  professor of aeronautics and astronautics.

"When you base decisions on computations that are in some way imperfect, you make errors," he said. "Not only that, but these hypersonic vehicles are themselves subject to uncertainties in how they behave in the air."

As a result, PSAAP's principal goal is to try to quantify those uncertainties – the known unknowns – so that scramjet engineers can build the appropriate tolerances into their designs to allow the engines to function in extraordinary environments.

Measuring what the engineers call epistemic uncertainty is common in real-world experimental work, where researchers typically note uncertainties in their measurements in the form of bars that have upper and lower limits. But hard numbers generated by computer models do not have uncertainty bars and therefore can take on an unwarranted, potentially dangerous air of certainty.

This video is not supported by your browser at this time.
Professor Parviz Moin shows the detail in a simulation of temperature fluctuations from a jet engine's exhaust. He says it's one of the largest engineering calculations ever undertaken. Credit: L.A. Cicero

"We have asked experimentalists for a long time to give us uncertainty bars on their measurements," said Moin. "But I think the time is right to ask the computationalists to do the same."

Quantification of uncertainties in numerical predictions is at the core of PSAAP. Gianluca Iaccarino, assistant professor of mechanical engineering, is leading this effort.

Innovations in computing

One reason computational uncertainty quantification is a relatively new science is that, until recently, the necessary computer resources simply didn't exist.

"Some of our latest calculations run on 163,000 processors simultaneously," Moin said. "I think they're some of the largest calculations ever undertaken."

Thanks to its close relationship with the Department of Energy, however, the Stanford PSAAP team enjoys access to the massive computer facilities at the Lawrence Livermore, Los Alamos and Sandia national laboratories, where their largest and most complex simulations can be run.

It takes specialized knowledge to get computers of this scale to perform effectively, however.

"And that's not something scientists and engineers should be worrying about," said Alonso, which is why the collaboration between departments is critical.

"Mechanical engineers and those of us in aeronautics and astronautics understand the flow and combustion physics of scramjet engines and the predictive tools. We need the computer scientists to help us figure out how to run these tests on these large computers," he said.

That need will only increase over the next decade as supercomputers move toward the exascale – computers with a million or more processors able to execute a quintillion calculations in a single second.

Thinking ahead to that day, the PSAAP team, led by computer science Professor Pat Hanrahan, has created LISZT, an entirely new computer language for running complex simulations on massive processor sets.

The great virtue of LISZT is its ability to directly express problems in engineering and science through code designed specifically for exascale architectures. That makes it equally accessible to experts working in fluid physics, combustion, turbulence and other mathematically intense applications while at the same time remaining highly computationally efficient.

LISZT seems to be one of the most viable methods – and some say only method – for doing real scientific modeling at the exascale, a distinction that has it attracting widespread international interest.

"It's something you could never have created unless you put computer scientists, mathematicians, mechanical engineers and aerospace engineers together in the same room," said Alonso. "Do it, though, and you can produce some really magical results." 

Advances in several dimensions

Beyond progress in the treatment of epistemic uncertainty in computer modeling and the creation of LISZT, the Stanford PSAAP team has made key advances in the specific disciplines that underpin scramjet engineering: combustion, turbulence and fluid flow in general.

And while the challenges of running an actual scramjet engine in a wind tunnel working at hypersonic speeds remain daunting, the Stanford PSAAP project is unique in that it has supported advances in physical experimentation.

"We've had strong validation of our computational work against experiments," said Moin. "In particular, in the High Temperature Gasdynamics Lab and the Flow group, we've developed a number of new techniques to validate how we build physical models into our computer code."

Collectively, these insights will enable the design of safer, more reliable hypersonic engines. But PSAAP's advances in quantifying uncertainty have other, far broader implications, said Alonso.

"These same technologies can be used to quantify flow of air around wind farms, for example, or for complex global climate models," he said. "I was in Los Alamos talking with people who are interested in global climate, and guess what? Just like the models for the scramjet, right now their climate models are far from perfect, but it doesn't stop them from pushing ahead."

Explore further: Identifying long-distance threats: New 3D technology could improve CCTV images

add to favorites email to friend print save as pdf

Related Stories

Scramjet test successful

Dec 31, 2005

The Freeflight Atmospheric Scramjet Test Technique, or FASTT, is the first liquid fuel-powered scramjet to fly, says the U.S. Office of Naval Research.

Image: X-51A Makes Longest Scramjet Flight

Jun 03, 2010

(PhysOrg.com) -- The X-51A successfully made the longest supersonic combustion ramjet-powered hypersonic flight to date off the southern California coast on May 26. It was powered by a SJX61-2 that was first ...

Experimental Scramjet aircraft set for test flight

Mar 23, 2011

The X-51A Waverider hypersonic scramjet project is set for its second test flight today, and the U.S. Air Force hopes it will demonstrate technology that can eventually be used for more efficient transport ...

Recommended for you

3D printed nose wins design award

7 hours ago

A Victoria University of Wellington design student is the New Zealand finalist for the James Dyson Award 2014 for his Master's project—a 3D printed prosthetic nose.

Engineering the Kelpies

8 hours ago

Recently, Falkirk in Scotland saw the opening of the Kelpies, two thirty metre high horse head sculptures either side of a lock in a new canal extension.

Technology on the catwalk

8 hours ago

Summer days bring thoughts of beach picnics, outdoor barbecues and pool parties. Yet it only takes the buzz of one tiny mosquito to dampen the fun.

Dismantling ships and the trajectory of steel

9 hours ago

Tell me how you dismantle a ship, and I'll tell how a region can prosper from its steel! This could be the motto of this master's cycle at ENAC during which the projects of two civil engineering students ...

User comments : 2

Adjust slider to filter visible comments by rank

Display comments: newest first

Lex Talonis
1 / 5 (1) May 16, 2012
It's easy to do... I just figured out the combustor just then.
dan42day
1 / 5 (1) May 16, 2012
Why not just wait 20 years and run the calculations on your IPhone XVII?